- Home
- Products
-
DOWNLOAD DATA SHEET
AK01 | Tnemec Shop Primer
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Modified Alkyd
- Finish Flat
AK01 is a high-solids, fast drying primer that provides extended weathering for shop and field priming of structural and miscellaneous steel.
-
DOWNLOAD DATA SHEET
AK02 | Tnemec Universal Primer
- Uses Original Equipment Manufacturer (OEM)
- For Steel
- Generic Description Phenolic Alkyd
Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications where "dry fall" characteristics are desired. Note: Not recommended for immersion.
-
DOWNLOAD DATA SHEET
Series 1 | Omnithane
- Uses Primer and/or Block Fillers
- For Steel, Other, Ductile Iron, Pipes & Fittings
- Generic Description Modified Aromatic Polyurethane Primer
A single component, moisture-cured resin, containing a proprietary blend of micaceous iron oxide and zinc to function as a primer which is field and shop friendly. May be used in OEM manufacturing, potable water and wastewater immersion with the proper topcoats. May also be used for marginally prepared rusty steel and tightly adhering old coatings for non-immersion maintenance situations.
-
DOWNLOAD DATA SHEET
Series 2H | Hi-Build Tneme-Gloss
- Uses Top and Finish Coats
- For DryWall and Gypsum, Steel
- Generic Description Alkyd
- Finish Gloss
High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.
-
DOWNLOAD DATA SHEET
Series 2HS | Low VOC Tneme-Gloss
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Alkyd
- Finish Gloss
A low VOC, high solids, high gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.
-
Series 10 | Tnemec Primers
- Generic Description Modified Alkyd
- This product has been discontinued. Please refer to Series V10 | Tnemec Primers for a suitable alternative, or contact your local sales representative for further assistance.
Chemically active, rust-inhibitive primer for ferrous metals. Provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
-
DOWNLOAD DATA SHEET
Series V10 | Tnemec Primers
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Modified Alkyd
Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
-
DOWNLOAD DATA SHEET
Series 20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
Industry standard for potable water epoxy coatings for nearly 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for its benchmark performance.
-
DOWNLOAD DATA SHEET
Series FC20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
Fast-curing protective coating for use in steel and concrete structures. Contact your Tnemec representative for other systems and additional information on potential uses.
-
Series FC20HS | Pota-Pox
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete
- Generic Description Polyamide Epoxy
- Finish Satin
- This product has been discontinued. Please contact your local sales representative for further assistance.
A high-solids, lower VOC version of Tnemec’s proven polyamide epoxy technology for steel and concrete substrates. Fast-cure properties are ideal for shop and low temperature application. Certified for use on potable water tanks, pipes, and valves.
-
Series 20HS | Pota-Pox
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete
- Generic Description Polyamide Epoxy
- Finish Satin
- This product has been discontinued. Please contact your local sales representative for further assistance.
A high-solids, lower VOC version of Tnemec’s proven polyamide epoxy technology. Provides excellent protection to steel and concrete substrates, and is certified for use in potable water immersion. Excellent choice for tanks, valves, and pipes.
-
DOWNLOAD DATA SHEET
Series 21 | Epoxoline
- For Steel, Concrete, Other
- Generic Description Phenalkamine Epoxy
High solids, immersion-grade coating offering exceptional build per coat for long-term corrosion resistance. For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment, as well as other steel and concrete substrates. Specially formulated to meet the latest requirements for use in potable water applications.
-
DOWNLOAD DATA SHEET
Series 22 | Epoxoline
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Ductile Iron, Pipes & Fittings
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water and wastewater environments. Specialized curing mechanism allows for faster cure response with airless spray application.
-
DOWNLOAD DATA SHEET
Series FC22 | Epoxoline
- Uses Top and Finish Coats
- For Steel, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, 100% solids epoxy liner for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion and chemical contact. For use on the interior and exterior of steel or concrete tanks, reservoirs, and pipes in potable water service.
-
DOWNLOAD DATA SHEET
Series 27 | F.C. Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For Steel, Other
- Generic Description Polyamide Epoxy
- Finish Flat
Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.
-
DOWNLOAD DATA SHEET
Series 27WB | Typoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Satin
A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.
-
Series 30 | Spra-Saf EN
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Other
- Generic Description Hydrophobic Acrylic Polymer
- Finish Satin
- This product has been discontinued. Please contact your local sales representative for further assistance.
An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Formulated to resist mildew growth on the paint film. Provides good gloss and color retention on structural steel, tanks, towers, pipes and similar structures. May also be used on a wide range of other substrates and many aged coatings, interior or exterior (test patch is recommended per Technical Bulletin 98-10). Application methods include “dry-fall” under certain conditions (see Application). Note: Spra-Saf EN’s “dry-fall” characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 37H | Chem-Prime H.S.
- Uses Primer and/or Block Fillers
- For Steel, Other, Ductile Iron, Pipes & Fittings
- Generic Description Phenolic Alkyd
Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications. Note: Not recommended for immersion.
-
Series 41 | Thinners
- Generic Description Thinners
All thinners are classified under Series 41. Product datasheets are not available for thinner products. MSDS available. For further thinning instructions, please refer to the product the thinner is going to be used in.
-
DOWNLOAD DATA SHEET
Series 43-236 | Fast Dry Aluminum
- Uses Top and Finish Coats
- For Steel
- Generic Description Copolymer Aluminum
- Finish Semi-Gloss
Fast drying spray-applied coating offering good protection for most exterior weathering conditions. Note: Series 43-236's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 43-36 | Chrome Aluminum
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Alkyd Aluminum
- Finish Low sheen
Metallic aluminum finish for protection against weather, heat and mild industrial fumes. Used on primed or previously-painted carbon and galvanized steel: tank exteriors, piping, equipment and structures. Not for immersion service.
-
DOWNLOAD DATA SHEET
Series 44-456 | Urethane Accelerator
- Generic Description Urethane Accelerator
Series 44-456 is a special additive used for lower temperature applications and accelerated cure for rapid handling and recoat situations. It may be used with the following Endura-Shield products; Series 1094, 1095 and 1096.
-
DOWNLOAD DATA SHEET
Series 44-500 | Skip-Saf
- Generic Description Fugitive Colorant
A disappearing colorant (patent pending) to aid in the uniform application of the clear coat. Adding Series 44-500 Skip-Saf to Series 76 and Series 1076 will temporarily provide a color contrast against a base coat.
-
DOWNLOAD DATA SHEET
Series 44-600 | UV Blocker
- Generic Description UV Absorber and light stabilizer
Please contact your Tnemec Coatings Consultant for specific application instructions. Series 44-600 is an additive package used to increase the resistance of Series 73, 247, 248, 290, and 291 to degradation caused by ultraviolet light.
-
DOWNLOAD DATA SHEET
Series 44-700 | Epoxy Accelerator
- Generic Description Modified Amine
Special additive for use with select epoxies to accelerate the cure rate and allow for coating application at temperatures down to 35°F (2°C).
-
DOWNLOAD DATA SHEET
Series 44-705 | Epoxy Accelerator
- Generic Description Epoxy Accelerator
Special additive for use with Series 66HS or 20HS to accelerate the cure rate and allow for coating application at temperatures down to 35°F (2°C).
-
DOWNLOAD DATA SHEET
Series 44-710 | Urethane Accelerator
- Generic Description Amine and Tin Catalysts
Special additive for most Tnemec urethane coatings affording low temperature application and accelerated cure for rapid handling and recoat situations.
-
DOWNLOAD DATA SHEET
Series 44-712 | UVX Accelerator
- Generic Description Catalyst
Special additive for Series 740/750 UVX affording low temperature application and faster moisture resistance.
-
DOWNLOAD DATA SHEET
Series 44-714 Ultra-Tread Accelerator
- Generic Description Accelerator
Series 44-714 Ultra-Tread Accelerator is a special additive used to decrease the cure time of Tnemec Company's four-component Ultra-Tread products when a faster return to service is needed. Series 44-714 has virtually no VOC or odor. It may be used with Series 241 Ultra-Tread MVT, 242 Ultra-Tread S, Series 243 Ultra-Tread V, Series 244 Ultra-Tread M, and Series 245 Ultra-Tread S or Series 246 Ultra-Tread Glaze.
-
DOWNLOAD DATA SHEET
Series 44-721 | Thixotropic Additive
- Generic Description Thixotropic Additive
An additive that increases the film build characteristics of Series 431 or 436.
-
DOWNLOAD DATA SHEET
Series 44-790 | Antimicrobial Additive
- Generic Description Antimicrobial Additive
Series 44-790 is an antimicrobial additive and is available to be factory-blended into Series 201, 210, 222, 223, 224, 237, 238, 239, 270, 273, 280, 281, 284, 285 and 286 products. Coatings treated with the Series 44-790 additive are intended for environments such as hospitals, clinics, pharmaceutical facilities, kitchens, cafeterias, food and beverage processing plants, correctional and animal care facilities. The treatment is specifically formulated to resist mildew growth on the paint film. The factory treated coating contains an antimicrobial agent to prevent microorganisms from degrading the coating film and guards against the growth of bacteria and their odors.
-
DOWNLOAD DATA SHEET
Series 44-809 | Smoothing Agent
- Generic Description Proprietary Modified Styrene
Used to smooth trowel marks in vinyl ester-based mortars and glass flake-filled linings. Note: Series 44-809 is not to be used as a reducer or thinner. Do not use in products other than vinyl ester-based materials.
-
DOWNLOAD DATA SHEET
Series 44-900 | Adhesion Promoter
- Generic Description Adhesion Promoter
An additive package to promote the adhesion and corrosion protection of Series 35 and 115 to selected substrates and primers.
-
DOWNLOAD DATA SHEET
Series 46-465 | H.B. Tnemecol
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Coal Tar
- Finish Semi-gloss
Versatile coal tar coating for use in immersion, splash and spillage, chemical fumes and below-grade environments.
-
DOWNLOAD DATA SHEET
Series 46H-413 | Hi-Build Tneme-Tar
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy-Coal Tar
- Finish Semi-gloss
High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and underground conditions. Also, when a two-coat application is desired, a low film build option is possible.
-
DOWNLOAD DATA SHEET
Series 48 | Multi-Purpose Epoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
- For Steel, Masonry & Stucco, Concrete
- Generic Description Polyamide Epoxy
- Finish Flat
A multi-purpose epoxy coating with fast-cure and low temperature application properties. An excellent choice for shop and field application when rapid curing for fast turn-around is needed. Can be applied to a variety of substrates including steel, concrete, and CMU, as well as previously painted surfaces. Accepts a range of primers and topcoats for complete system selection.
-
DOWNLOAD DATA SHEET
Series 49 | Multi-Purpose Epoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.
A high-solids, low VOC epoxy coating used for a multitude of primer and topcoat applications. The tough, abrasion-resistant film of Series 49 provides durable protection to concrete, CMU, and steel, and it is immersion grade, making it an excellent choice for non-potable service environments. Excellent adhesion properties allow for use on marginally prepared surfaces when blast cleaning is not possible.
-
DOWNLOAD DATA SHEET
Series 51 | PVA Sealer
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum
- Generic Description Vinyl Acrylic
A waterborne primer-sealer for uncoated drywall in interior dry environments.
-
DOWNLOAD DATA SHEET
Series 54 | Masonry Filler
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Vinyl Acrylic Latex Block Filler
- Finish Flat
Single component coating for filling surface voids in porous concrete and masonry block on interior, dry, above-grade masonry surfaces.
-
DOWNLOAD DATA SHEET
Series 61 | Tneme-Liner
- Uses Linings & Secondary Containment
- For Steel, Masonry & Stucco, Concrete
- Generic Description Cycloaliphatic Amine Epoxy
- Finish Semi-gloss
Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion service, including fuel and crude oil storage, fuel pipelines, chemical containment and wastewater treatment.
-
DOWNLOAD DATA SHEET
Series 66 | Hi-Build Epoxoline
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.
-
Series 66HS | Hi-Build Epoxoline
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Product is made to order for specific projects. Contact your Tnemec Representative for additional information.
A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.
-
DOWNLOAD DATA SHEET
Series L69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series L69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.
-
DOWNLOAD DATA SHEET
Series N69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy for protection and finishing of steel and concrete in commercial, industrial and marine environments. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
-
DOWNLOAD DATA SHEET
Series N69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series V69 | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.
-
DOWNLOAD DATA SHEET
Series V69F | Hi-Build Epoxoline II
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamidoamine Epoxy
- Finish Satin
An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.
-
DOWNLOAD DATA SHEET
Series 72 | Endura-Shield
- Uses Top and Finish Coats
- For Steel
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Gloss
A durable topcoat for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
DOWNLOAD DATA SHEET
Series 73 | Endura-Shield
- Uses Intermediate Coats, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A coating for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
Series 73U | Endura-Shield
- Generic Description Aliphatic Acrylic Polyurethane
A coating highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Series 73U provides additional protection from UV light. NOT FOR IMMERSION SERVICE. Contact your Tnemec Coatings Consultant for additional product information.
-
Series 82HS | Versatone
- Generic Description Silicone Alkyd
- Finish Gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
A high solids, single component, silicone-alkyd finish coat that provides superior color and gloss retention over conventional alkyd enamels. Primarily used for coating primed or previously painted steel and galvanized steel substrates. Versatone incorporates a 30% copolymerized silicone-alkyd resin, which provides unmodified maximum performance.
-
DOWNLOAD DATA SHEET
Series 88HS | Azeron H.S. Primer
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Alkyd Primer
- Finish Flat
Fast-dry, lead- and chromate-free, rust-inhibitive shop primer for structural and miscellaneous steel that is to be enclosed, protected or topcoated.
-
DOWNLOAD DATA SHEET
Series 90E-92 | Tneme-Zinc
- Uses High Temp, Primer and/or Block Fillers
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Ethyl Silicate Inorganic Zinc-Rich
Self-curing, primer/finish with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 90G-1K97 | Tneme-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Polyurethane, Zinc-Rich
An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
-
Series 90-1K97 | Tneme-Zinc
- Generic Description Aromatic Polyurethane, Zinc-Rich
- This product has been discontinued. Please contact your local sales representative for further assistance.
An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
-
DOWNLOAD DATA SHEET
Series 90-94 | Tneme-Zinc
- For Steel
- Generic Description Polyamide Epoxy Zinc Rich
Product is made to order for specific projects. Contact your Tnemec Representative for additional information.
An advanced technology, three-component, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
-
DOWNLOAD DATA SHEET
Series 90-97 | Tneme-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Urethane, Zinc-Rich
An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the “same-day.” Also used for field touch-up of inorganic zinc coating. Application methods include “dry-fall” under certain conditions (see Application).
-
DOWNLOAD DATA SHEET
Series H90-97 | Tneme-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Urethane, Zinc-Rich
An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the "same-day." Also used for field touch-up of inorganic zinc coating. H90-97 is HAPS compliant for use in-shop.
-
DOWNLOAD DATA SHEET
Series 90-98 | Tneme-Zinc
- Uses High Temp, Primer and/or Block Fillers
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Ethyl Silicate Inorganic Zinc-Rich
Self-curing, corrosion-resistant steel or ductile iron primer with tenacious bonding and abrasion resistance qualities. Its galvanic action resists undercutting. Excellent stand alone performance in high temperature or long-term atmospheric exposure. Finish with specialized topcoats to improve aesthetics, increase long-term performance or protect the primer from attack in aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 91-H2O | Hydro-Zinc
- Uses Primer and/or Block Fillers
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Aromatic Urethane, Zinc-Rich
A two-component, moisture-cured, zinc-rich primer for the interior and exterior of steel potable water tanks. Provides outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec potable water tank coatings. It cures quickly and can be topcoated the same day at surface temperatures down to 35°F (2°C). Series 91-H2O has no maximum recoat time, making it ideally suited as a primer for both sides of plate steel surfaces in water tank fabrication shops. Application methods include “dry-fall” under certain conditions (see Application). Note: When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.
-
DOWNLOAD DATA SHEET
Series 94-H2O | Hydro-Zinc
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Urethane, Zinc-Rich
A single-component, moisture-cured, zinc-rich primer for steel structures, including the interior and exterior of steel potable water tanks. Commonly used in commercial, industrial, and marine markets in various applications to provide outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec coatings. Series 94-H2O has no maximum recoat time, cures quickly and offers rapid recoat at surface temperatures down to 35°F (2°C). Note: When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.
-
DOWNLOAD DATA SHEET
Series 104 | H.S. Epoxy
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Cycloaliphatic Amine Epoxy
- Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.
Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.
-
DOWNLOAD DATA SHEET
Series 113 | H.B. Tneme-Tufcoat
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Epoxy
- Finish Satin
High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
-
DOWNLOAD DATA SHEET
Series 114 | H.B. Tneme-Tufcoat
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Epoxy
- Finish Gloss
High performance gloss coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
-
DOWNLOAD DATA SHEET
Series 115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series V115 | Uni-Bond DF
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Self-crosslinking Hydrophobic Acrylic
- Finish Eggshell
A high-performance, versatile coating appropriate for a variety of uses including: Exterior Steel: Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. Humid Environments: Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. Dry Interior Environments: One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. Note: Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 118 | Uni-Bond Mastic
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Mastic Waterborne Acrylic
- Finish Matte
A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.
-
DOWNLOAD DATA SHEET
Series 120-5001 | Vinester
- Uses Top and Finish Coats
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A finish coat designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 120-5002 | Vinester
- Uses Primer and/or Block Fillers
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A primer designed for superior protection against organic and inorganic acids and sour crude when stored at elevated temperatures in insulated tanks. Sprayable lining for tanks and vessels. Provides splash, spillage and fume protection for structural surfaces and secondary containment. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 130 | Envirofill
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Waterborne Cementitious Acrylic
Exceptional filling capabilities for interior/exterior porous concrete and CMU. Seals and primes surface for application of a variety of high performance water- and solvent-based topcoats in moderately severe exposures.
-
DOWNLOAD DATA SHEET
Series 132 | ProTuff Mastic
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Phenalkamine Epoxy Mastic
- Finish Semi-gloss
Series 132 is a versatile, high-build, surface tolerant epoxy designed for application over tightly adhered light corrosion and marginally prepared or previously coated steel, or as a primer/intermediate coat under weather-able finishes. Series 132 may be applied at low-temperatures, over dew point conditions and on damp surfaces. Suitable for use on structures subjected to corrosive, damp, or immersion environments including coastal and marine structures such as tanks, boat hulls, voids, machinery spaces, bilges, and other wet areas. Good for maintenance and new construction applications.
-
DOWNLOAD DATA SHEET
Series 133 | ProTuff Aluminum
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Phenalkamide Aluminum Epoxy Mastic
- Finish Semi-gloss
A high-build, aluminum-filled surface tolerant epoxy mastic designed for application over tightly adhered corrosion, marginally prepared steel, and old coatings. Series 133 may be applied at low-temperatures and over dew point conditions and on damp surfaces. The preferred selection for holding back active corrosion and as a basecoat under weather-able and epoxy finishes.
-
DOWNLOAD DATA SHEET
Series 135 | Chembuild
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Modified Polyamidoamine Epoxy
- Finish Semi-gloss
High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 138 | ProTuff
- Generic Description Phenalkamide Epoxy Finish
- Finish Semi-gloss
A high-build, surface tolerant epoxy mastic that can be applied over light corrosion and marginally prepared steel, in low-temperatures and over dew point conditions. Series 138 stands up to the harsh atmospheric environments found in industrial facilities. Its unique phenalkamide epoxy technology resists color shift, making it an ideal finish coat for severe conditions.
-
DOWNLOAD DATA SHEET
Series L140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative, low VOC potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, and fittings in potable water service.
-
DOWNLOAD DATA SHEET
Series L140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Versatile epoxy coating (factory accelerated version of L140) for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks that contain demineralized, deionized, distilled, or potable water.
-
DOWNLOAD DATA SHEET
Series N140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series N140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series V140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series V140F | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series 141 | Epoxoline
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete
- Generic Description Modified Polyamine Epoxy
A high-solids lining offering high-build edge protection and long-term durability. Series 141 is abrasion and corrosion-resistant for extended immersion service in crude oil and finished fuels. Used to protect steel and concrete storage tanks, transport tanks, pipelines, and industrial wastewater while increasing service life.
-
DOWNLOAD DATA SHEET
Series 142 | Epoxoline
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete
- Generic Description Glass Flake Reinforced Modified Polyamine Epoxy
Abrasion resistant, high solids, epoxy coating which offers high-build edge protection and excellent corrosion resistance. Contains glass flake and aluminum oxide for improved film integrity. For use on the interior and exterior of steel or concrete tanks, pipes, and other heavy-duty equipment in industrial service.
-
DOWNLOAD DATA SHEET
Series 151-1051 | Elasto-Grip FC
- Uses Primer and/or Block Fillers
- For DryWall and Gypsum, Masonry & Stucco, Other
- Generic Description Waterborne Modified Polyamine Epoxy
- Finish Matte
Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.
-
DOWNLOAD DATA SHEET
Series 152 | Tneme-Tape
- Generic Description Polyester Fabric
Flexible tape provides reinforcement for coatings that will bridge cracks and expansion joints.
-
DOWNLOAD DATA SHEET
Series 154 | TnemeGuard
- Uses Flooring
- For DryWall and Gypsum, Concrete, Other
- Generic Description Mastic Waterborne Acrylic
- Finish Matte
Series 154 is a durable, single-component, water-based elastomeric coating that forms a waterproof film over horizontal or vertical concrete surfaces as well as various types of wallboard, wood and tile. It is an excellent choice for areas that receive light to moderate traffic including balconies, walkways, pedestrian bridges, mechanical equipment rooms and other surfaces such as concrete decks that may require protection from weather or water intrusion. Versatile application characteristics allow Series 154 to be applied neat, as a broadcast system, or mixed with aggregate and either applied as slurry or used as a surfacer or filler. Series 154 can also be reinforced using woven or octagonal mesh inlays where crack-bridging or extra durability is needed.
-
DOWNLOAD DATA SHEET
Series 156 | Enviro-Crete
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Modified Waterborne Acrylate
- Finish Matte — Smooth
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.
-
DOWNLOAD DATA SHEET
Series 157 | Enviro-Crete
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Modified Waterborne Acrylate
- Finish Matte — Sand Texture
Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light.
-
DOWNLOAD DATA SHEET
Series 158 | Bio-Lastic
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Other
- Generic Description Specialized Waterborne Acrylate
- Finish Matte
A durable coating specially formulated to resist mildew growth on the paint film. Permeable and flexible, it’s capable of bridging cracks and can withstand minor substrate movement, frequent scrubbing and cleaning.
-
DOWNLOAD DATA SHEET
Series 161 | Tneme-Fascure
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
Low temperature-cure, corrosion-resistant coating for protection against abrasion, immersion and mild chemical contact. Fast recoat at 75°F (24°C).
-
Series 161HS | Tneme-Fascure
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Polyamide Epoxy
- Finish Satin
- This product has been discontinued. Please contact your local sales representative for further assistance.
A high-solids, low VOC, pure polyamide epoxy offering excellent protection to a wide range of substrates in atmospheric and immersion environments. Its fast-cure characteristics are ideal for shop or low temperature application. Versatile use as a primer, intermediate, or topcoat it is complimented by a variety of finish coat options.
-
DOWNLOAD DATA SHEET
Series 180 | W.B. Tneme-Crete
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Flat, smooth
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application "dry-falls" under certain conditions.
-
DOWNLOAD DATA SHEET
Series 181 | W.B. Tneme-Crete
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Flat, sand texture
Decorative, high-build protection against weather, driving rain, industrial fumes and alternate freezing-thawing. Formulated to resist mildew growth on the paint film. Available in smooth (Series 180) and sand-texture (Series 181) finishes for concrete, CMU and properly primed steel. Spray application “dry-falls” under certain conditions.
-
DOWNLOAD DATA SHEET
Series 201 | Epoxoprime
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
High-solids moisture tolerant epoxy used for priming concrete, wood and drywall. Also as a stand-alone one-coat clear floor sealer. Excellent chemical resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 205 | Terra-Tread FC
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyamide Epoxy
- Finish Pigmented: Satin Clear: Gloss
A fast-cure, versatile coating that can be used as a penetrating primer or a general duty topcoat for protection against abrasion and mild chemicals. Can be applied in temperatures as low as 35°F (2°C).
-
DOWNLOAD DATA SHEET
Series 206 | Sub-Flex EP
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Flexible Epoxy
Flexible epoxy underlayment for bridging small substrate cracks in concrete and to provide a protective waterproof membrane under aggregate reinforced flooring systems. This flexible basecoat is capable of withstanding 50 mils of differential movement without damaging the system.
-
DOWNLOAD DATA SHEET
Series 206SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- For Concrete
- Generic Description Modified Flexible Polyamine Epoxy
Glass-reinforced, flexible epoxy mortar basecoat for bridging small substrate cracks in secondary containment concrete structures. Replaces mortar/slurry basecoat for Series 237SC, 239SC, and 252SC when a flexible basecoat is desired.
-
DOWNLOAD DATA SHEET
Series 208 | Epoxoprime MVT
- Uses Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
Epoxoprime MVT is a unique, moisture-tolerant, two component, low viscosity, high solids epoxy primer designed to reduce moisture vapor emissions and provide alkalinity control for concrete with elevated moisture vapor transmission levels that exceed the acceptable limits of non-breathing resilient and polymer floor topping finishes. Epoxoprime MVT can be applied to properly prepared, 10 day old concrete and withstands moisture vapor transmission up to 15 lbs (per ASTM F 1869) and relative humidity up to 95% (per ASTM F 2170). Epoxoprime MVT has a low perm rating (0.05 perm) and is alkaline insensitive to pH levels of 14.
-
DOWNLOAD DATA SHEET
Series 210 | Even-Flow SL
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aggregate-Filled Modified Polyamine Epoxy
- Finish Gloss
A high gloss, high build, self-leveling epoxy topping for concrete floors. It imparts an ultra smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
-
DOWNLOAD DATA SHEET
Series 211-215 & 216 | Fiberglass Mat
- Generic Description 3/4 oz Chopped Strand Mat
Provides fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Increases impact, thermal shock and abrasion resistance for greater durability.
-
DOWNLOAD DATA SHEET
Series 211-212 & 213 | Glass Beads
- Generic Description Glass Bead Additive
Provides enhanced slip-resistance for added safety in select StrataShield topcoats.
-
DOWNLOAD DATA SHEET
Series 211-225 | Carbon Mat
- Generic Description Open Weave Carbon Fiber Mat
- Finish Flat
Series 211-225 is a high purity, open weave carbon mat, used to reinforce coating, topping and lining systems for protection against thermal shock in chemically charged areas where traditional silica or glass type fabrics are not recommended. Series 211-225 provides a silica free reinforcement to epoxy & vinyl ester lining systems.
-
DOWNLOAD DATA SHEET
Series 211-226 & 227 | Fiberglass Mat
- Generic Description 1.5-ounce chopped strand Fiberglass Mat
Provides fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Increases impact, thermal shock and abrasion resistance for greater durability.
-
DOWNLOAD DATA SHEET
Series 211-9111 | Bulking Powder
- Generic Description Specially Blended Fine Bulking Powder
Series 211-9111 is a specially formulated powder, which is added to Series 1415, 1416 or 1418 to a create a mortar, aiding in the application of horizontal and vertical surfaces as well as to hold reinforcement materials.
-
DOWNLOAD DATA SHEET
Series 211-9215 | Abrasion Resistant Powder
- Generic Description Specially Blended Abrasion Resistant Ultra-Fine Bulking Powder
Series 211-9215 is used to create a highly abrasion resistant mortar for areas of high wear and impingement. Series 211-9215 is added to Series 1415, 1416 or 1418 and applied over glass roving or directly to properly prepared and primed surfaces.
-
DOWNLOAD DATA SHEET
Series 211-149 & 150
- Generic Description 1.5-ounce chopped strand Fiberglass Mat
Provides fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Increases impact, thermal shock and abrasion resistance for greater durability
-
DOWNLOAD DATA SHEET
Series 211-228 | Woven Roving
- Generic Description 18-ounce Fiberglass Woven Roving
Provides an extra heavy fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Series 211-228 increases impact, thermal shock and abrasion resistance for high wear areas when topcoated with an appropriate mortar finish.
-
DOWNLOAD DATA SHEET
Series 211-9106 | Silica-Free Bulking Powder
- Generic Description Specially Blended Silica-Free Ultra-Fine Bulking Powder
Series 211-9106 is a specially formulated, silica-free powder, which is added to Series 1415, 1416 or 1418 to hold silica-free mats in reinforcement systems and to create a silica-free mortar or grout. Used in aggressive environments such as primary and secondary containment areas that are exposed to high caustic, spent bleaches and fluorinated mineral acids.
-
DOWNLOAD DATA SHEET
Series 211-OC | Octagonal Mesh
- Generic Description Polyester Reinforcing Mesh
Provides reinforcement to acrylic systems for minor crack bridging, minor substrate movement and greater durability.
-
DOWNLOAD DATA SHEET
Series 211-WV | Woven Mesh
- Generic Description Polyester Reinforcing Mesh
Provides reinforcement to acrylic systems which provides greater durability. This woven reinforcing mesh creates a continuous basecoat for areas that are frequently wet.
-
DOWNLOAD DATA SHEET
Series 215 | Surfacing Epoxy
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 215ML | Mat-Reinforced Epoxy Lining
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.
-
DOWNLOAD DATA SHEET
Series 217 | MortarCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Calcium Sulfoaluminate Cementitious Repair Mortar and Concrete
A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete.
-
DOWNLOAD DATA SHEET
Series 218 | MortarClad
- Uses Surfacer, Filler, Patcher
- For Masonry & Stucco, Concrete
- Generic Description Epoxy Modified Cementitious Mortar
A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 218-1000 | MortarClad
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Modified Cementitious Mortar
A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
-
DOWNLOAD DATA SHEET
Series 222 | Deco-Tread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
A low ambering, multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series N222 | Deco-Tread
- Uses Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N222 can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat, and topcoat. It provides excellent application properties with good flow and self-leveling characteristics. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 223 | Deco-Trowel
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Decorative quartz—multi-colored appearance. The finished appearance and texture will depend on the type, film thickness and number of clear finish coats selected.
A low ambering, decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. Protects against impact, abrasion and has very good chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series N223 | Deco-Trowel
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N223 is a decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 224 | Deco-Fleck
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
- Finish Decorative flake—multi-colored appearance. The finished appearance will depend on the number, type and film thickness of the clear finished coats selected.
A low ambering, customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. Protects against abrasion and mild chemicals with an aesthetically pleasing speckled appearance.
-
DOWNLOAD DATA SHEET
Series N224 | Deco-Fleck
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N224 is a customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 230ESD | Static-Shield EP
- Uses Flooring
- For Concrete
- Generic Description Polyamine Epoxy - Electrostatic Dissipative
- Finish Gloss
Commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Formulated using single wall carbon tube technology specifically designed to provide superior electrical conductivity and enhanced mechanical properties. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20-2014. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
-
DOWNLOAD DATA SHEET
Series 233 | Power-Tread LE
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
DOWNLOAD DATA SHEET
Series 237 | Power-Tread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
DOWNLOAD DATA SHEET
Series 237SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
A multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 238 | Power-Tread FC
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Fast-Cure Epoxy
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
-
DOWNLOAD DATA SHEET
Series 239 | ChemTread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Novolac Polyamine Epoxy
A chemical resistant, multi-purpose novolac epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
-
DOWNLOAD DATA SHEET
Series 239SC | ChemBloc
- Uses Intermediate Coats, Primer and/or Block Fillers, Linings & Secondary Containment, Flooring
- Generic Description Modified Novolac Polyamine Epoxy
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 241 | Ultra-Tread MVT
- Uses Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Polyurethane Modified Concrete
Ultra-Tread MVT is a low odor, slurry applied, high performance moisture control base layer designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread MVT is a self-priming, base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Note: Series 241 must be broadcast to refusal with aggregate, color quartz or decorative flake typically completed within 10 to 15 minutes of application. Color quartz and/or decorative flake systems will require an additional broadcast layer using Series 222, 224, 237, 238, 256, 257 or 286, clear to obtain a uniform appearance and texture before applying the desired clear finish coats. This will typically result in a total system thickness of approximately 1/8".
-
DOWNLOAD DATA SHEET
Series 242 | Ultra-Tread S
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series 243 | Ultra-Tread V
- Uses Flooring
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread V is a low-odor mortar designed for troweling vertical surfaces such as trenches and equipment pads, and for building cove base. It should be used for vertical application needs in conjunction with horizontal applications of Series 242 Ultra-Tread S, Series 244 Ultra-Tread M or Series 245 Ultra-Tread S. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.
-
DOWNLOAD DATA SHEET
Series 244 | Ultra-Tread M
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread M is a low odor, mortar applied floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread M is a self-priming mortar that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series 245 | Ultra-Tread S
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series 246 | Ultra-Tread Glaze
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyurethane
- Finish Matte
Ultra-Tread Glaze is a pigmented, high-build, low odor, polyurethane coating. Typically used as a topcoat for sealing or locking aggregate in Series 242 Ultra-Tread S or Series 245 Ultra-Tread S broadcast texture finishes. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity.
-
DOWNLOAD DATA SHEET
Series 247 | EverThane
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane
- Finish Gloss
Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space. Note: For horizontal surfaces only.
-
DOWNLOAD DATA SHEET
Series 248 | EverThane
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane
- Finish Semi-gloss. *Note:* The gloss level can be reduced by adding two Part C filler components to each kit.
Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space.
-
DOWNLOAD DATA SHEET
Series 249ESD | Static-Shield UR
- Uses Flooring
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane - Electrostatic Dissipative
Extremely hard, chemical-resistant, electrostatic dissipative urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
-
DOWNLOAD DATA SHEET
Series 251SC | ChemBloc
- Uses Primer and/or Block Fillers, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A chemical resistant primer for use with Series 252SC secondary containment system. Note: Contact your Tnemec representative or Tnemec Technical Services with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 252SC | ChemBloc
- Uses Linings & Secondary Containment, Top and Finish Coats
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
A highly chemical resistant, multi-purpose resin for fiberglass reinforced mat (65 mils) or mortar/fiberglass reinforced mat (125 mils) secondary containment systems. Protects against harsh chemicals, thermal cycling, impact and abrasion.
-
DOWNLOAD DATA SHEET
Series 256 | ExcellaThane
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
-
DOWNLOAD DATA SHEET
Series 257 | ExcellaThane SS
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
A slower setting Polyaspartic floor coating, offering longer working time and lower viscosity. Series 257 minimizes the potential for lap marks and roller lines when used in large flooring applications. It can be used as a two coat thin-film system or as a clear or pigmented finish coat over systems built using epoxy or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 257 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
-
DOWNLOAD DATA SHEET
Series V260 | Tneme-Bond Clear
- For Concrete
- Generic Description Organo Silane
A chemically active, low voc solution used to promote the adhesion of Series 262, 264 or 265 when recoating with itself if maximum cure time has been exceeded.
-
DOWNLOAD DATA SHEET
Series 262 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
- Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.
Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility. Ideally suited for environmental requirements of waste containment for primary or secondary containment. Spray applied, it forms the monolithic, impermeable liner required for earth collection and catch basins, decorative ponds and fountains, reservoirs, cooling towers, dams and spillways.
-
DOWNLOAD DATA SHEET
Series 264 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
- Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.
Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment.
-
DOWNLOAD DATA SHEET
Series 265 | Elasto-Shield TG
- Uses Surfacer, Filler, Patcher
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
A trowel-grade compound for use with Elasto-Shield products. Used to fill and repair cracks, bugholes, spalled or otherwise damaged concrete, masonry and asphalt. Also used for sealing the edges of faying surfaces, sealing seams, filling pits and encapsulating rivet and bolt heads on the interior of steel tanks.
-
DOWNLOAD DATA SHEET
Series 270 | Stranlok
- Uses Intermediate Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete
- Generic Description Polyamine Epoxy
A high-performance, fiberglass-reinforced wall coating for protection against acids, alkalis and physical abuse. Stranlok’s 100% solids epoxy technology is solventless and VOC compliant, making Stranlok virtually odorless and permitting application in occupied facilities. Its accelerated curing schedule and installation process mean faster return-to-service times. A unique blend of two types of premixed reinforcing fibers allows Stranlok to be spray or trowel applied up to 40 mils. The integrity of the interlocking fibers allows the surface to withstand daily high-pressure steam cleaning. In addition to this high tolerance to “thermal shock,” Stranlok also features broad chemical, impact and abrasion resistance.
-
DOWNLOAD DATA SHEET
Series 273 | Stranlok ML
- Uses Intermediate Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface with excellent chemical, stain, impact and abrasion resistance.
-
Series 275 | Stranlok
- Generic Description Polyamine Novolac Epoxy
- Finish Semi-gloss
- This product has been discontinued. Please refer to Series 270 | Stranlok for a suitable alternative, or contact your local sales representative for further assistance.
A fiber-reinforced coating for protection against acids, alkalis and other aggressive chemical solutions. The dense, seamless surface can be easily cleaned with pressurized hot water.
-
DOWNLOAD DATA SHEET
Series 280 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 280FC | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 281 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A high-gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
-
DOWNLOAD DATA SHEET
Series 282 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Polyamine Novolac Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.
-
DOWNLOAD DATA SHEET
Series N283 | Coving Resin
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A clear, thixotropic binder resin. Series N283 is designed to be used in all phases of cove building or vertical trowel applications (priming, base coat, and topcoat) and it can also be used for concrete repair. Note: When using Series N283 for building cove or troweled wall applications an aggregate similar to 30/50 mesh silica sand, Series 222 or 223 Quartz must be used. Has excellent adhesion, good chemical resistance, repairs concrete, and can be applied up to 1/4” without sagging.
-
DOWNLOAD DATA SHEET
Series 284 | Deco-Clear
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. The texture of the finished surface depends on the number of coats applied.
A low ambering, clear finish for decorative flooring systems. It protects against mild chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.
-
DOWNLOAD DATA SHEET
Series N284 | Deco-Clear
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. The texture of the finished surface depends on the number of coats applied.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N284 is a clear finish for decorative flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
DOWNLOAD DATA SHEET
Series 285 | Satinglaze
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Orange Peel
A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake filled flooring systems. Coves and Vertical Surfaces: Series 285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.
-
DOWNLOAD DATA SHEET
Series N285 | Satinglaze
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss - Orange Peel
A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake-filled flooring systems. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance. Coves and Vertical Surfaces: Series N285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.
-
DOWNLOAD DATA SHEET
Series 286 | Deco-Clear CR
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Novolac Polyamine Epoxy
- Finish Gloss. The texture of the finished surface depends on the number of coats applied.
A clear novolac finish for decorative flooring systems. It protects against harsh chemicals, impact and abrasion, providing a skid-resistant or smooth finish depending on the number of coats.
-
DOWNLOAD DATA SHEET
Series 287 | Enviro-Pox
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Epoxy-Amine Adduct
- Finish Semi-gloss
A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.
-
DOWNLOAD DATA SHEET
Series 290 | CRU
- Uses Flooring, Top and Finish Coats
- For Steel, Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Semi-Gloss
Extremely hard, chemical-resistant urethane coating for applications in commercial, industrial, and marine environments with excellent resistance to abrasion, washdown conditions, corrosive fumes and chemical contact. Gloss retention among the best of air dried finishes.
-
DOWNLOAD DATA SHEET
Series V290 | CRU
- Uses Flooring, Top and Finish Coats
- For Steel, Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Semi-Gloss
Extremely hard, chemical-resistant urethane coating with excellent resistance to abrasion, wash down conditions, corrosive fumes, and chemical contact. Gloss retention is among the best of air-dried finishes.
-
Series 291 | CRU
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
Extremely hard, chemical-resistant polyurethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss and color retention among the best of air dried finishes. Note: For horizontal surfaces only.
-
Series 294 | Clear CRU
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Low semi-gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
Durable, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance and a low-sheen appearance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
-
Series 295 | Clear CRU
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Gloss
- This product has been discontinued. Please contact your local sales representative for further assistance.
Extremely hard, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has superb flow characteristics, excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Gloss among the best of air dried finishes. Typically used over epoxy and urethane flooring systems for increased abrasion and chemical resistance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
-
DOWNLOAD DATA SHEET
Series 296 | Enviro-Glaze Clear
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Ceramic-Modified Waterborne Aliphatic Polyurethane
- Finish Gloss
A clear, low odor, fast dry, low VOC, waterborne polyurethane floor coating for interior wall and floor applications. Provides enhanced abrasion resistance and stain resistance. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
-
DOWNLOAD DATA SHEET
Series 297 | Enviro-Glaze
- Uses Flooring, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description Ceramic-Modified Waterborne Aliphatic Polyurethane
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Low odor, fast dry, low VOC, waterborne polyurethane coating for wall and floor applications. Provides enhanced abrasion resistance, stain resistance and color stability. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
-
DOWNLOAD DATA SHEET
Series 307 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
- Finish Semi-gloss
A versatile, high-build, epoxy internal lining applied in a single coat by plural component equipment. Its enhanced chemical resistance and physical properties make it an excellent, cost-effective choice for corrosion control in tanks handling brine water, drilling mud, mild temperature backflow, and a wide range of chemicals used in the oil and gas industry. Series 307 contains micro-fiber reinforcement for enhanced film integrity.
-
DOWNLOAD DATA SHEET
Series 312 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
A convenient, easy to use touch-up kit, ideal for small repairs and holidays. Packaged in a two-part dispenser tube that separates resin and hardener and is applied using a high-thrust ratio applicator. Compatible with all Tank Armor products.
-
DOWNLOAD DATA SHEET
Series 322 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, solvent-free, high build epoxy lining for the interior of steel storage tanks and vessels from various cargos including crude oil and finished fuels. Also used to line concrete basins, troughs, and tanks where a coating resistant to chemicals, fuels, and domestic wastewater immersion service is needed. Can be applied with airless spray or plural-component equipment.
-
DOWNLOAD DATA SHEET
Series 335 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
- Finish Semi-gloss
Internally reinforced, 100% solids epoxy lining that provides protection against corrosion and chemical attack. Specified for use as a protective lining in finished fuels, sweet/sour crude, and brine immersion exposures for above-ground and transport tanks, and pipelines. Series 335 provides long-term durability and corrosion control for extended service life. Also recommended as a liner for tanks and transports containing DEF (Diesel Exhaust Fluid). Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 340 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Modified Polyamine Epoxy
- Finish Semi-gloss
A thick-film epoxy formulated for corrosion control and internal lining of petroleum storage tanks. Lining may also be used for select chemical storage tanks. Refer to the Tnemec Chemical Resistance Chart.
-
DOWNLOAD DATA SHEET
Series 350 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Modified Phenolic Epoxy
- Finish Semi-gloss
A high-build, tightly cross-linked, high-performance epoxy with excellent resistance to a broad range of chemicals, solvents, and petroleum over a wide range of temperatures. Refer to the Series 350 Chemical Resistance Guide for more information.
-
DOWNLOAD DATA SHEET
Series 351 | Tank Armor
- Uses Surfacer, Filler, Patcher
- For Steel
- Generic Description Polysulfide Epoxy Novolac Polymer
- Finish Semi-gloss
A 100% solids flexible polymer formulated for general use as a trowel grade filler/surfacer for steel and provides protection against chemical attack and environmental degradation. Resistant to a wide range of petroleum products, fuels, gasohol, waste, alkalis, and organic and inorganic acids. Compatible with a variety of topcoats. Note: Contact your Tnemec representative or Tnemec Technical Service with specific chemical exposures.
-
DOWNLOAD DATA SHEET
Series 365 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Novolac Epoxy
- Finish Semi-gloss
Spray applied, 100% solids, high build, reinforced epoxy formulated for general use as an internal lining for tanks and other aggressive chemical immersion service. Exhibits excellent range of chemical and solvent resistance combined with physical properties for long term durability and service life. Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 370 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Polyamine Epoxy
- Finish Gloss
An epoxy lining formulated for corrosion control and aggressive chemical immersion in pressurized vessels, pipelines, storage tanks, industrial wastewater, etc. Series 370 exhibits superior resistance to a wide range of chemicals with excellent physical properties for long term durability and service life, and offers convenient airless spray application for both field and shop. Contains micro-fiber reinforcement for improved film integrity. Note: Application, environmental and design factors, chemical temperatures, and chemical mixtures can significantly impact coating performance, so due care should be exercised in the selection and use of the coating. Contact your Tnemec representative to review full project details before coating is selected.
-
Series 390 | Tank Armor
- Generic Description Novolac Epoxy
- Finish Semi-gloss
- This product has been discontinued. Please refer to Series 391 | Tank Armor for a suitable alternative, or contact your local sales representative for further assistance.
A thick-film reinforced epoxy internal lining formulated for corrosion control of chemical tanks and aggressive chemical immersion. Series 390 exhibits superior resistance to a wide range of chemicals with excellent physical properties for long term durability and service life. Refer to the Series 390 Chemical Resistance Guide. The Series 390 touch-up kit may be used to repair other Tank Armor linings. Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 391 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Polyamine Epoxy
- Finish Semi-gloss
An internal epoxy lining formulated for aggressive chemical immersion and corrosion control of chemical tanks. Contains micro-fiber reinforcement for improved film integrity. Series 391 exhibits superior resistance to a wide range of chemicals, acids, and fractionation blends with excellent physical properties for long-term durability and the service life of transport and storage tanks. Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 394 | PerimePrime
- Uses Primer and/or Block Fillers
- For Steel
- Generic Description Aromatic Polyurethane, Mio-Zinc Filled Primer
Specially formulated, one-component, moisture-cured, micaceous iron oxide and zinc-filled primer that offers superior bonding to marginally prepared rusty steel and tightly adhered old coatings. This high-performance primer is ideal for corrosion resistance with a triple barrier mechanism of zinc, mio, and urethane resin built into the dry film. It is suitable as a corrosion-resistant primer under certain fireproofing systems. Contact your Tnemec representative for specific information.
-
DOWNLOAD DATA SHEET
Series 396 | Tank Armor
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Ultra High-Build Reinforced Novolac Epoxy
- Finish Semi-gloss
A thick-film reinforced epoxy internal lining formulated for corrosion control and abrasion resistance in milling and process environments, chemical plants and refineries. Allows for ultra high-build application of 125 mils DFT. Series 396 exhibits superior corrosion and abrasion resistance for pipelines and process and storage tanks.
-
DOWNLOAD DATA SHEET
Series 406 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Aromatic Polyurethane Hybrid
A two-component, fast-setting, monolithic coating designed to provide a durable polyurethane lining in a single-coat, multi-pass spray application applied with plural component equipment. This high-performance coating has excellent chemical, thermal shock, and abrasion resistance. It is ideal for application to steel or concrete in water and wastewater treatment, secondary containment, and for tank linings and bottoms. Recommended for immersion service. Note: All orders are subject to approval based upon project scope, applicator qualification, and appropriate equipment configuration.
-
DOWNLOAD DATA SHEET
Series 425 | Epoxoline ARO
- Uses Top and Finish Coats
- For Steel
- Generic Description Polyamine Epoxy
- Finish Semi-gloss
A 100% volume solids Abrasion Resistant Overcoat (ARO) system designed as a protective topcoat for fusion bonded epoxy (FBE) during directional- and thrust-bore drilling and other severe abrasive pipeline applications. ARO can also be used as a direct to metal (DTM) system to protect steel or ductile iron substrates when HDD (horizontal directional drilling) or abrasion is a concern. Contact Tnemec for more information.
-
DOWNLOAD DATA SHEET
Series 431 | Perma-Shield PL
- Uses Linings & Secondary Containment
- For Steel, Ductile Iron, Pipes & Fittings
- Generic Description Modified Polyamine Ceramic Epoxy
- Finish Gloss
A 100% solids, abrasion-resistant lining specifically designed for wastewater immersion and fume environments and exposure to corrosive soils. Provides low permeation to H2S gas, protects against MIC and provides chemical resistance to steel, ductile iron pipe and fittings for severe wastewater or buried exposures. A coal-tar free, resin-rich formulation with low pigment volume concentration (PVC) for maximum performance.
-
DOWNLOAD DATA SHEET
Series 434 | Perma-Shield H2S
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Modified Aliphatic Amine Epoxy Mortar
A 100% solids, hybrid epoxy mortar designed for severe wastewater immersion and fume environments. Specifically formulated to withstand high levels of hydrogen sulfide gas (H2S), sulfuric acid (H2SO4), as well as other gases common to sewer exposures. Aggregate reinforcement provides additional resistance to abrasions and impacts.
-
DOWNLOAD DATA SHEET
Series G435 | Perma-Glaze
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A versatile, thick film, 100% solids, abrasion-resistant lining specifically designed for domestic wastewater immersion and fume environments. Series 435 provides low permeation to H2S gas, protects against MIC and provides chemical resistance to severe wastewater environments. Contains micro-fiber reinforcement for improved film integrity.
-
DOWNLOAD DATA SHEET
Series G436 | Perma-Shield FR
- Uses Linings & Secondary Containment
- For Concrete
- Generic Description Fiber-Reinforced Modified Polyamine Epoxy
- Finish Gloss
A thick film, 100% solids, spray-applied, an abrasion-resistant coating designed for domestic wastewater immersion and fume environments. Provides excellent resistance to H2S gas permeation, protects against MIC, and provides chemical resistance to severe wastewater environments. Fiber reinforcement provides superior physical strength and higher film build.
-
Series 446 | Perma-Shield MCU
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Hydrophobic Aromatic Polyurethane
- This product has been discontinued. Please contact your local sales representative for further assistance.
An advanced technology moisture-cured, hydrocarbon-modified coating providing excellent protection to steel and concrete substrates in wastewater environments. Provides excellent resistance to H2S gas permeation, protects against MIC and provides chemical resistance to domestic wastewater environments. It is user-friendly and rapid curing.
-
DOWNLOAD DATA SHEET
Series 469 | LavaCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 469 LavaCrete is a non-shrinking epoxy polymer concrete used for the rehabilitation of severely eroded concrete or for the corrosion proofing of new concrete where chemical resistance is required throughout the complete topping system. Extremely fast setting, allowing for rebuilds of process floors and secondary containment structures. Also used to cast sumps, drains and trenches and is an outstanding grouting material for vibration dampening in base plates and on motor pads. Series 469 kits are packaged for casting and standard placement of material. A grouting mix may be made by adjusting the kit for a more fluid application. Series 469 resin may also be used in broadcast, trowel and mat reinforced systems with a multitude of ancillary materials for services in chemical processing, wastewater, paper, power and other demanding industries.
-
DOWNLOAD DATA SHEET
Series 479 | LavaCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Novolac Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 479 is a non-shrinking novolac epoxy polymer concrete ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Extremely fast setting, allowing for rebuilds of sumps, pump pads, trenches, process floors and secondary containment structures. Series 479 kits are packaged for casting and standard placement of material. A grouting mix may be made by adjusting the kit for a more fluid application. Series 479 resin may also be used in broadcast, trowel and mat reinforced systems with a multitude of ancillary materials for services in chemical processing, wastewater, paper, power and other demanding industries.
-
DOWNLOAD DATA SHEET
Series 489 | LavaCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Epoxy Vinyl Ester Polymer Concrete
- Finish Flat (as poured). *Note:* A semi-gloss finish can be achieved by troweling the surface.
Series 489 is a durable polymer concrete which exhibits fast curing and minimal shrinkage. Ideal for the rehabilitation of severely eroded concrete or for the corrosion-proofing of new concrete where superior chemical resistance is required throughout the complete topping system. Series 489 is ideal for pump and pad rebuilds in areas of strong acid and caustic exposure. Use to cast sumps and trenches off-site for time and labor savings.
-
Series 530 | Omnithane
- Generic Description Moisture-Cured Aromatic Urethane
- Finish Matte
- This product has been discontinued. Please refer to Series V530 | Omnithane for a suitable alternative, or contact your local sales representative for further assistance.
Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum finish is desired. Topcoating provides enhancement of systems and more latitude with color. Compatible with aged coatings, but verify with test patch.
-
DOWNLOAD DATA SHEET
Series V530 | Omnithane
- Uses Primer and/or Block Fillers, Top and Finish Coats
- For Steel
- Generic Description Moisture-Cured Aromatic Urethane
- Finish Matte
Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum finish is desired. Topcoating provides enhancement of systems and more latitude with color. Compatible with aged coatings, but verify with test patch.
-
Series 607 | Conformal Stain
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Methylmethacrylate Acrylic/Hydrophobic Fumed Silica
This product has been discontinued. Please refer to Series 617 | Conformal Stain WB for a suitable alternative, or contact your Tnemec Sales Representative
Conformal Stain is a penetrating, solvent-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain exhibits excellent color stability and is designed not to peel or flake when applied to a properly prepared substrate. Repels water when used on dense substrates.
-
DOWNLOAD DATA SHEET
Series 617 | Conformal Stain WB
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description 100% Acrylic Polymer
Conformal Stain WB is a penetrating, water-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain WB exhibits excellent color stability, and is designed not to peel or flake when applied to a properly prepared substrate. Conformal Stain WB provides color uniformity by correcting color imperfections often found in integrally colored concrete masonry, natural stone, tilt-up and precast panels. Repels water when used on dense substrates. Conformal WB is mildew resistant and contains agents that inhibit the growth of mildew on the surface of the stain.
-
Series 620 | Phylon 1422
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Methylmethacrylate Acrylic
- This product has been discontinued. Please contact your local sales representative for further assistance.
Phylon 1422 is a non-yellowing, acrylic coating that highlights the natural color of masonry by providing a clear, semi-gloss sheen. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Phylon 1422 provides a durable, wet-look finish to exposed aggregate, ground-face block, sandblasted concrete and many other vertical concrete, masonry and natural stone surfaces. Repels water when used on dense substrates.
-
Series 621 | Phylon WB
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description 100% Acrylic Polymer
- This product has been discontinued. Please contact your local sales representative for further assistance.
Phylon WB is a non-yellowing, water-based, acrylic coating that highlights the natural color of masonry by providing a clear, gloss sheen. Its special formulation provides a hard, durable gloss finish. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Phylon WB provides a durable, wet-look finish to exposed aggregate, ground-face block, sandblasted concrete and many other vertical concrete, masonry and natural stone surfaces.
-
Series 624 | Phylon
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Acrylic Copolymer Blend
- This product has been discontinued. Please refer to Series 620 | Phylon 1422 for a suitable alternative, or contact your local sales representative for further assistance.
Phylon 624 is a unique acrylic copolymer, formulated to meet VOC requirements for curing compounds. Phylon 624 is a non-yellowing curing, sealing, hardening, dust proofing and water repellent compound that exhibits a tough, long lasting, glossy film. Phylon 624 is designed for use on exterior and interior slabs as well as above grade architectural concrete.
-
Series 625 | Conformal Clear
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Methylmethacrylate Acrylic/Hydrophobic Fumed Silica
- This product has been discontinued. Please contact your local sales representative for further assistance.
Conformal Clear is a penetrating, solvent-based masonry coating for virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Clear is designed to darken and highlight the substrate and will not peel or flake. Conformal Clear is compatible with most caulking and sealing compounds. Repels water when used on dense substrates.
-
Series 626 | Dur A Pell GS
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description RTV Silicone Rubber Water Repellent and Graffiti Protectant
- Finish Flat to slight sheen, depending on substrate.
- This product has been discontinued. Please contact your local sales representative for further assistance.
Series 626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of, unwanted graffiti. This product is intended for use in conjunction with Series 680 Mark A Way to provide a complete Graffiti Protection System. Dur A Pell GS is a clear, silicone rubber based formulation, which protects vertical concrete block, brick, cast concrete, stone and other masonry substrates with little or no change to the appearance of the untreated substrate. Dur A Pell GS protects both new and existing uncoated substrates by penetrating into the pores, to prevent graffiti penetration. It has excellent stability against ultraviolet rays and salt spray and provides long-lasting protection.
-
Series V626 | Dur A Pell GS
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description RTV Silicone Rubber Water Repellent and Graffiti Protectant
- Finish Flat to slight sheen, depending on substrate.
- This product has been discontinued. Please contact your local sales representative for further assistance.
Series V626 Dur A Pell GS has been formulated to provide superior protection against, and easy removal of unwanted graffiti. This product is intended for use in conjunction with Series 680 Mark A Way to provide a complete Graffiti Protection System. Dur A Pell GS is a clear, silicone rubber based formulation, which protects vertical concrete block, brick, cast concrete, stone and other masonry substrates with little or no change to the appearance of the untreated substrate. Dur A Pell GS protects both new and existing substrates by penetrating into the pores, to prevent graffiti penetration. It has excellent stability against ultraviolet rays and salt spray and provides long-lasting protection.
-
Series 629 | CT Densifyer
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Silicate Blend
- This product has been discontinued. Please contact your local sales representative for further assistance.
CT Densifyer is a clear, penetrating, water-based sealer for virtually all above-grade, horizontal, poured-in-place concrete. Concrete treated with CT Densifyer resists dusting, abrasion, wear, and damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to increase density at the surface and dustproof concrete.
-
Series 632 | Prime-A-Pell H2O Concentrate
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Siloxane/Silane Blend
This product has been discontinued. Please refer to Series 633 | Prime-A-Pell H2O for a suitable alternative, or contact your Tnemec Sales Representative
Prime-A-Pell H2O Concentrate is a concentrated water-based water repellent requiring dilution at the job site. Upon dilution, Prime-A-Pell H2O Concentrate produces a clear, filmless, penetrating water-repellent treatment for virtually all above-grade, vertical concrete, stucco, precast, sandstone and brick and block masonry. Concrete, stone and masonry treated with diluted Prime-A-Pell H2O Concentrate resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
-
DOWNLOAD DATA SHEET
Series 633 | Prime-A-Pell H2O
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Siloxane/Silane Blend
Prime-A-Pell H2O is a clear, filmless, low solids, penetrating water-based water repellent for virtually all above-grade, concrete, stucco, precast, brick, sandstone and block masonry. Concrete, stone and masonry treated with Prime-A-Pell H2O resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and water deterioration.
-
Series 636 | Dur A Pell 20
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Silane/Siloxane Blend
This product has been discontinued. Please refer to Series 633 | Prime-A-Pell H2O for a suitable alternative, or contact your Tnemec Sales Representative
Dur-A-Pell 20 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, block and brick masonry and natural stone. Concrete, stone and masonry treated with Dur A Pell 20 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
-
DOWNLOAD DATA SHEET
Series 660 | Prime-A-Pell 200
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Modified Siloxane with Diffused Quartz Carbide
Prime-A-Pell 200 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical concrete, stucco, block and brick masonry. Concrete, stone and masonry treated with Prime-A-Pell 200 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration. Prime-A-Pell 200 is manufactured utilizing a process whereby defused quartz carbide and an oligomeric siloxane are coupled, then dispersed in a hydrocarbon solvent mixture.
-
DOWNLOAD DATA SHEET
Series 662 | Prime-A-Pell Plus
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Modified Siloxane/Silane with Diffused Quartz Carbide
Prime-A-Pell Plus is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, block and brick masonry. Concrete, stone and masonry treated with Prime-A-Pell Plus resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
-
Series V662 | Prime-A-Pell Plus
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Modified Siloxane/Silane with Diffused Quartz Carbide
- This product has been discontinued. Please contact your local sales representative for further assistance.
Prime-A-Pell Plus is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, block and brick masonry. Concrete, stone and masonry treated with Prime-A-Pell Plus resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
-
Series 663 | Prime-A-Pell N.S.
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Modified Siloxane with Diffused Quartz Carbide
This product has been discontinued. Please refer to Series 633 | Prime-A-Pell H2O for a suitable alternative, or contact your Tnemec Sales Representative
Prime-A-Pell N.S. (natural stone) is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical concrete and block and brick masonry and vertical and horizontal installations of natural stone. Concrete, natural stone and masonry treated with Prime-A-Pell N.S. resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
-
Series 664 | Dur A Pell 40
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Silane
This product has been discontinued. Please refer to Series 662 | Prime-A-Pell Plus for a suitable alternative, or contact your Tnemec Sales Representative
Dur A Pell 40 is a clear, filmless, penetrating water repellent for virtually all above-grade, concrete, stucco, natural stone, block and brick masonry. Concrete, stone and masonry treated with Dur A Pell 40 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
-
Series 665 | Dur A Pell 100
- Uses Stains, Water Repellants, and Anti Grafitti
- For Masonry & Stucco, Concrete
- Generic Description Silane
This product has been discontinued. Please refer to Series 662 | Prime-A-Pell Plus for a suitable alternative, or contact your Tnemec Sales Representative
Dur A Pell 100 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, natural stone, block and brick masonry. Concrete, stone and masonry treated with Dur A Pell 100 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.
-
Series 667 | Deck A Pell 15
- Generic Description Silane/Siloxane Blend
- This product has been discontinued. Please contact your local sales representative for further assistance.
Concrete, stone and masonry treated with Deck A Pell 15 resist water and chloride ion intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage.
-
Series 680 | Mark A Way
- Uses Stains, Water Repellants, and Anti Grafitti
- For Concrete
- Generic Description Citrus Aroma Graffiti Cleaner
- This product has been discontinued. Please contact your local sales representative for further assistance.
Liquid cleaner used in association with Chemprobe Series 626 and V626 Dur A Pell GS to remove graffiti from block, brick, concrete, stone and other porous masonry substrates. May also be used alone for the removal of most types of graffiti in a single application.
-
DOWNLOAD DATA SHEET
Series 700 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series V700 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 701 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss
An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series V701 | HydroFlon
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-Gloss
A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 740 | UVX
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Modified Polycarbamide
- Finish Gloss
An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to abrasion and exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 750 | UVX
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Modified Polycarbamide
- Finish Semi-gloss
An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 945 | Aerolon Tape
- Uses Insulating
- For DryWall and Gypsum, Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Insulative Tape, Self-adhesive
An innovative, self-adhesive thermally insulative tape that contains a proprietary blend of insulative particles for exceptionally low thermal conductivity. Excellent for controlling condensation and providing thermal efficiency on processing equipment such as tanks, pipes, and valves. It is also a highly effective thermal break for mitigating condensation on architectural components which transmit outside temperatures through the building envelope. Series 945 Aerolon Tape is available in multiple widths that are 30 feet long and 1.5 mm thick. It can be applied in multiple layers to achieve desired thickness.
-
DOWNLOAD DATA SHEET
Series 971 | Aerolon Acrylic
- Uses Insulating
- For Steel, Masonry & Stucco, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Fluid-applied acrylic insulation coating
- Finish Matte
An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that imparts exceptional insulative properties to a variety of substrates. Ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement or personnel protection is desired. Part of a durable, corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI) and mitigating thermal bridging by controlling condensation.
-
DOWNLOAD DATA SHEET
Series 975 | Aerolon
- Generic Description Fluid-applied acrylic insulation coating
- Finish Matte
An innovative, fluid-applied, thermal insulating coating ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement, condensation reduction, or personnel protection is desired. This unique formulation is highly filled with a hydrophobic, insulative particle offering exceptional thermal performance and features a durable, water-based resin system with excellent adhesion and durability. Part of a corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI), and mitigating thermal bridging by controlling condensation.
-
DOWNLOAD DATA SHEET
Series 1026 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Acrylic Emulsion
- Finish Matte
A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection to a variety of substrates. Excellent as a topcoat or intermediate-coat on anti-corrosive steel coating systems or when applied to concrete and drywall. Easy to apply by brush, roller, and spray, this product’s low odor and low VOC qualities make it versatile choice on architectural and industrial projects. Note: Application methods include “dry-fall” under certain conditions (see application).
-
DOWNLOAD DATA SHEET
Series 1028 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description HDP Acrylic Polymer
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 1028T | Enduratone
- Uses Insulating, Top and Finish Coats
- For Steel
- Generic Description HDP Acrylic Polymer
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Contains ceramic spheres for enhanced thermal stability. May be applied by spray, brush or roller over Aerolon insulative coating systems. It is mildew resistant and exhibits very good gloss and color stability.
-
DOWNLOAD DATA SHEET
Series 1029 | Enduratone
- Uses Intermediate Coats, Top and Finish Coats
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
- Generic Description HDP Acrylic Polymer
- Finish Low semi-gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). Note: Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.
-
DOWNLOAD DATA SHEET
Series 1070 | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1070V | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Gloss
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1071 | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1071V | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-Gloss
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1072 | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Satin
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1072V | Fluoronar
- Uses Top and Finish Coats
- For Steel, Concrete, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Satin
A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1074 | Endura-Shield II
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1074U | Endura-Shield II
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultra-violet light (UV) absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1075 | Endura-Shield II
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1075U | Endura-Shield II
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultraviolet (UV) light absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.
-
Series 1076 | Fluoronar Clear
- Generic Description Advanced Thermoset Solution Fluoropolymer Clear
- Finish High gloss
- This product has been discontinued. Please refer to Series 1070 | Fluoronar for a suitable alternative, or contact your local sales representative for further assistance.
An exterior clear fluoropolymer finish coat especially designed to enhance the exterior weatherability of Fluoronar and HydroFlon. Fluoronar Clear has outstanding resistance to ultra-violet light providing extended color and gloss retention to the coating system. An indicator dye is provided to aid in application.
-
DOWNLOAD DATA SHEET
Series 1077 | Enduralume
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
An acrylic polyurethane finish coat that contains a sparkle aluminum pigment creating a metallic aesthetic finish. It is a highly durable coating that is resistant to abrasion, wet conditions and exterior weathering. This high performance finish contains UV absorbers for extended color and gloss retention. NOT FOR IMMERSION SERVICE.
-
DOWNLOAD DATA SHEET
Series 1078 | Fluoronar Metallic
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss.
A high-solids fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1078V | Fluoronar Metallic
- Uses Top and Finish Coats
- For Steel, Other
- Generic Description Advanced Thermoset Solution Fluoropolymer
- Finish Semi-gloss. Other gloss levels may be available, contact Tnemec.
A low VOC fluoropolymer coating that provides an ultra-durable metallic or pearlescent finish. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings. Contact Tnemec Technical Services or your local Tnemec representative for details.
-
DOWNLOAD DATA SHEET
Series 1079 | Metallic Clearcoat
- Uses Top and Finish Coats
- For Steel
- Generic Description Aliphatic Acrylic Polyurethane
- Finish High gloss
A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Series 44-500 (patent 5,548,010 and other patents pending), an optional indicator dye, is available to aid in uniform application. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.
-
DOWNLOAD DATA SHEET
Series 1079-0762 | Metallic Clearcoat
- Uses Top and Finish Coats
- For Steel
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-Gloss
A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.
-
DOWNLOAD DATA SHEET
Series 1079-0763 | Metallic Clearcoat
- Uses Top and Finish Coats
- For Steel
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Satin
A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.
-
DOWNLOAD DATA SHEET
Series 1080 | Endura-Shield
- Uses Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Polyurethane
- Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
A waterborne polyurethane coating that provides color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, high gloss finish and easy cleanup.
-
DOWNLOAD DATA SHEET
Series 1081 | Endura-Shield
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Waterborne Acrylic Polyurethane
- Finish Semi-Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
A waterborne polyurethane coating that provides excellent abrasion resistance and color and gloss retention for applications to steel, concrete and other miscellaneous substrates. It features low VOC content, low odor, semi-gloss finish and easy cleanup.
-
DOWNLOAD DATA SHEET
Series 1094 | Endura-Shield
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Gloss
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
DOWNLOAD DATA SHEET
Series 1095 | Endura-Shield
- Uses Intermediate Coats, Top and Finish Coats
- For Steel, Masonry & Stucco, Concrete, Other
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Semi-gloss
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
DOWNLOAD DATA SHEET
Series 1096 | Endura-Shield
- Generic Description Aliphatic Acrylic Polyurethane
- Finish Eggshell
A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Can be applied by brush, roller or spray. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
-
DOWNLOAD DATA SHEET
Series 1224 | Epoxoline WB
- Uses Primer and/or Block Fillers
- For Steel, Other
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Flat
An advanced generation, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used as a primer or intermediate coat on structural steel, infrastructure, institutional, and architectural applications. Offers superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid-handling properties. Excellent resistance to yellowing and chalking when exposed to UV and an extended recoat window make it a versatile choice. Its high-performance formulation offers excellent adhesion and provides exceptional protection up to 400°F (204°C). Formula protected under U.S. patent. Note: This product is a direct replacement for Series 27WB Typoxy.
-
DOWNLOAD DATA SHEET
Series 1254 | EpoxoBlock WB
- Uses Primer and/or Block Fillers
- For Masonry & Stucco, Concrete
- Generic Description Inorganic Hybrid Water-Based Epoxy
- Finish Flat
An advanced generation, low odor, low VOC, high solids, water-based epoxy coating for filling surface voids in porous concrete and masonry block in interior and exterior environments. Provides high bond strength, fast curing, and rapid overcoating capabilities and can be topcoated with a variety of water- and solvent-based coatings.
-
DOWNLOAD DATA SHEET
Series 1400 | Color Packs
- Generic Description Reactive Color Shading Paste
Highly pigmented, color paste used to shade clear or non-pigmented Series 1415, 1416 and 1418 materials. Generally used to make a self-leveling and/or finish coat, but may also be added to mortar coat-based systems.
-
DOWNLOAD DATA SHEET
Series 1402 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Vinyl Ester
- Finish Gloss
Series 1402 is a food grade, vinyl ester primer for complete FDA-compliant lining systems in concrete, steel or stainless-steel tanks. Fast-cure characteristics allow for quick application of subsequent coats, limiting downtime and facility disruption. Series 1402 is the only approved primer for the ProPolymer food grade product line. Replaces ProPolymer 4808.
-
DOWNLOAD DATA SHEET
Series 1407 | Vinester
- Uses Primer and/or Block Fillers
- For Steel, Concrete
- Generic Description Flexible Vinyl Ester
- Finish Gloss
Series 1407 is a specially formulated primer with flexible properties designed for use on concrete and steel substrates. Series 1407 may be used under a wide-range of Tnemec vinyl ester intermediate and finish coats with the exception of direct food contact systems. Replaces ProPolymer 4805.
-
DOWNLOAD DATA SHEET
Series 1415 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Semi-gloss
This corrosion resistant resin is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. A versatile selection for many secondary containments and process floors, Series 1415 is best for caustic and high-ph applications, and when used as the base material for silica-free systems. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1415 was formerly ProPolymer 4860.
-
DOWNLOAD DATA SHEET
Series 1416 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
This extremely corrosion resistant coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. Series 1416 is the best selection for strong acid conditions and when temperatures above ambient conditions are expected. Use this product to add specialty mortar powders, to embed glass mats, as a saturant coat, or as a pigmented self-leveling finish coat. Combine with LavaCrete Part C aggregate to create an enhanced corrosion resistant polymer concrete. Series 1416 was formerly ProPolymer 4847.
-
DOWNLOAD DATA SHEET
Series 1418 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description High Temperature Novolac Vinyl Ester
- Finish Semi-gloss
Resistant to very high temperature service and extremely corrosive environments, this coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as "neat" or non-pigmented. Series 1418 is the recommended selection for use in the most chemically demanding environments, such as, wet or dry FGD scrubbers, ductwork and slurry tanks operating in elevated temperature conditions. Use with specialty mortar powders, to embed glass mats, as a saturant coat or as a pigmented self-leveling finish coat. Series 1418 was formally ProPolymer 4847HT.
-
DOWNLOAD DATA SHEET
Series 1420 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Matte
Series 1420 is an FDA-compliant, trowel-grade vinyl ester lining suitable for direct-food contact in tanks and vessels. Glass-flake reinforcement provides additional abrasion and permeation resistance in wet slurry or immersion service environments. Series 1420 may be used as a stand-alone lining system or with a gel coat in a multi-coat system. Replaces ProPolymer 4855T.
-
DOWNLOAD DATA SHEET
Series 1422 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1422 is an FDA-compliant, trowel-grade, high temperature lining suitable for tanks and vessels in food grade service environments or where high temperature conditions are required. Highly filled with glass-flake, it is specially formulated for exceptional service in thermal cycling and chemical reaction vessels. Replaces ProPolymer 4865T.
-
DOWNLOAD DATA SHEET
Series 1428 | Vinester
- Uses Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
An enhanced elevated temperature, novolac vinyl ester, filled with specially treated premium glass flakes. This product has outstanding trowel application properties. Series 1428 is ideal for the rehabilitation of heavily corroded steel substrates and for high film build protection in the most demanding chemically active and corrosive environments. Series 1428 can be used in FGD units for time saving, quick repairs on small areas or used as a complete lining. Formerly ProPolymer 4875T.
-
DOWNLOAD DATA SHEET
Series 1430 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1430 is an FDA-compliant, mineral flake-filled vinyl ester lining for food grade tanks, vessels and other structures. Applied by spray or roller, it can be used as either a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4813S.
-
DOWNLOAD DATA SHEET
Series 1432 | ProPolymer
- Uses FDA, Linings & Secondary Containment
- For Steel, Concrete
- Generic Description Elevated Temperature Epoxy Vinyl Ester
- Finish Semi-gloss
Series 1432 is an FDA-compliant, vinyl ester lining for food grade tanks, vessels and other structures. Highly filled with glass flake, Series 1432 is specially formulated to provide exceptional service in thermal cycling and chemical reaction tanks and vessels. Applied by roller or spray, it may be used as a stand-alone lining system or as a topcoat for added protection over trowel applied vinyl ester linings. Replaces ProPolymer 4822S.
-
DOWNLOAD DATA SHEET
Series 1436 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Epoxy Novolac Vinyl Ester
- Finish Semi-gloss
A high molecular weight (HMW), elevated temperature-service, glass-flake-filled novolac vinyl ester lining. Can be used as a gel coat, as a stand-alone liner or as part of a full vinyl ester system. Commonly used in high temperature filtration units, bag houses, exhaust and duct work, and as a primary lining for wet chemical services. Formerly ProPolymer 4834S.
-
DOWNLOAD DATA SHEET
Series 1438 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A high-build, novolac vinyl ester, glass-flake filled lining with an enhanced elevated temperature resistance in dry and wet corrosive environments. Series 1438 is ideal for use in flue gas desulfurization (FGD) units, hot duct work, and wet and dry absorbers. Also an outstanding primary lining for many challenging chemical immersion services. Formerly ProPolymer 4844S.
-
DOWNLOAD DATA SHEET
Series 1439 | Vinester
- Uses Linings & Secondary Containment
- For Steel
- Generic Description Abrasion Resistant Novolac Vinyl Ester
- Finish Semi-gloss
An elevated temperature service, high-build novolac vinyl ester, with a proprietary blend of abrasion resistant powders and ceramics. Series 1439 is ideal for use in high wear, high air velocity with heavy particulate suspension and on impingement areas. Series 1439 is an outstanding selection for use in abrasive slurry lining services. Formerly ProPolymer 4844SAR.
-
DOWNLOAD DATA SHEET
Series 1444 | Vinester
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A high-build, vinyl ester lining with corrosion resistant graphite and other specialty fillers to create a low surface energy film imparting a high degree contact angle resulting in improved non-stick characteristics. Use this enhanced, silica-free material in prevention of process material build-up such as fly ash, caking by-products and slurry deposits. Save time and costs with the improved cleaning properties of this coating versus other non-release type linings. An ideal finish coat for hot caustic and non-silica preferred lining applications such as hydrofluoric acid.
-
DOWNLOAD DATA SHEET
Series 1448 | Vinester
- Generic Description Novolac Vinyl Ester
- Finish Semi-gloss
A high-build, vinyl ester lining with corrosion resistant graphite fillers. Use where silica free coatings perform best, such as high alkali environments, spent bleach solutions and hydrofluoric and fluosilicic acids, in elevated temperature conditions for both dry, fume and wet services. The graphite also provides good electrical conductivity and is a high wear finish.
-
Series 1501 | Endura-Heat Primer
- Uses High Temp, Primer and/or Block Fillers
- For Steel
- Generic Description Silicone Alkyd
- Finish Flat
- This product has been discontinued. Please contact your local sales representative for further assistance.
A heat-resistant, corrosion-inhibitive, silicone alkyd primer that protects steel in service environments up to 600°F (315°C). Fast, ambient cure allows topcoats to be quickly applied so equipment and structures can be painted and returned to service. Hot application option up to 400°F (204°C).
-
Series 1505 | Endura-Heat ZR
- Uses High Temp, Primer and/or Block Fillers
- For Steel
- Generic Description Silicone Zinc Copolymer
- Finish Flat
- This product has been discontinued. Please contact your local sales representative for further assistance.
A high-performance, two-component, zinc-rich, silicone copolymer that offers galvanic protection to steel substrates for extended corrosion protection up to 1000°F (538°C). An excellent primer for use with selected topcoats as part of a corrosion- and heat-resistant coating system. Requires an exceptionally low minimum 250°F (121°C) heat cure prior to placing in service.
-
Series 1525 | Endura-Heat DTM
- Uses High Temp, Primer and/or Block Fillers, Top and Finish Coats
- For Steel
- Generic Description Silicone Copolymer
- Finish Flat
- This product has been discontinued. Please contact your local sales representative for further assistance.
A specialized, direct-to-metal (DTM), corrosion inhibitive, aluminum silicone copolymer for steel substrates that reach elevated temperatures up to 1200°F (648°C). Its fast-cure capabilities allow for quick multi-coat application and return to service. Requires an exceptionally low 250°F (121°C) heat cure prior to placing in service.
-
Series 1528 | Endura-Heat DTM
- Uses High Temp, Primer and/or Block Fillers, Top and Finish Coats
- For Steel
- Generic Description Inert Multipolymeric Matrix
- Finish Flat
- This product has been discontinued. Please contact your local sales representative for further assistance.
An advanced, inert multipolymeric chemistry that provides high-performance direct-to-metal (DTM) coating protection to steel and stainless steel substrates in elevated temperatures up to 1200°F (648°C). Exceptional adhesion properties allow the coating to withstand severe thermal cycling (-300 to 1200°F), and its tolerance to marginally prepared substrates make it a viable alternative when abrasive blasting is not permitted. Its high-build feature and resistance to cyclic conditions make it an excellent coating system on pitted steel and for protecting against corrosion under insulation (CUI). Dry-fall spray characteristic provides fast, labor-saving coating application when used with appropriate thinner.
-
Series 1552 | Endura-Heat
- Uses High Temp, Top and Finish Coats
- For Steel
- Generic Description Acrylic Silicone Copolymer
- Finish Matte
- This product has been discontinued. Please contact your local sales representative for further assistance.
A heat-resistant, acrylic silicone topcoat available in a wide range of colors using thermally stable pigments for temperatures up to 500°F (260°C), and black, aluminum, or limited gray colors up to 800°F (426°C). This topcoat is used as the finish to high-temperature coating systems, imparting excellent resistance to weathering and UV-light degradation. Ambient, air-dried cure.
-
Series 1556 | Endura-Heat
- Uses High Temp, Top and Finish Coats
- For Steel
- Generic Description Modified Silicone Copolymer
- Finish Flat
- This product has been discontinued. Please contact your local sales representative for further assistance.
A modified silicone copolymer topcoat formulated for color stability and substrate protection in elevated temperatures up to 1000°F (538°C). Outperforms conventional high-temperature topcoats with exceptional color stability, resistance to thermal cycling, and cure requirements. An excellent choice for topcoating high-temperature coating systems in refineries, power plants, petrochemical facilities, and treatment plants. Requires heat cure prior to placing in service.
-
Series 1558 | Endura-Heat DTM
- Uses High Temp, Primer and/or Block Fillers, Top and Finish Coats
- For Steel
- Generic Description Modified Silicone Copolymer
- Finish Flat
- This product has been discontinued. Please contact your local sales representative for further assistance.
A versatile silicone copolymer coating applied direct-to-metal (DTM) or as a topcoat in high-temperature coating systems. Its high-build characteristics and corrosion-inhibitive pigments provide protection to steel substrates up to 1000°F (538°C). Wide color options and superior adhesion to marginally prepared substrates make it an excellent choice for use throughout refineries, power plants, petrochemical facilities, and treatment plants. Requires a 350°F (177°C) heat cure prior to placing in service.
-
DOWNLOAD DATA SHEET
Series 3600 | ProBond
- Generic Description Low Stress Penetrating Epoxy Sealer
- Finish High-gloss
Series 3600 ProBond is a thin-film, low stress, epoxy designed to adhere to a multitude of substrates, including old finishes, and is frequently used as an overcoating primer. Series 3600 is solvent-free and is applied at a low film thickness to reduce stress and weight on old tightly adhered coatings creating a foundation to accept high-performance epoxy and polyurethane finishes. Also used, when specified, as the primer under Lavacrete polymer concrete epoxy toppings.