Series 1072V

Fluoronar

Generic Type

Advanced Thermoset Solution Fluoropolymer

Common Usage

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

View more product details

Colors

    This product is available in 503 colors.

View Available Colors

View available colors in our Color Tool; you can also select and request color swatches.

Finish

Satin

Curing Time

Temperature To Touch To Handle Minimum Recoat ‡
90°F (32°C) 30 minutes 1-2 hours 4-6 hours
70°F (21°C) 30 minutes 6-8 hours 12-16 hours
50°F (10°C) 30 minutes 12-16 hours 16-20 hours

‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness.
Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.

Theoretical Coverage

866 mil sq ft/gal (21.3 m²/L at 25 microns) †

Intermediate

Series 73, 750, 1075, 1075U. (Intermediate coat may be required for some applications, please contact your Tnemec coating consultant.) Note: When topcoating with Series 1072V, the following maximum recoat times apply: Over 27, L69, L69F, N69, N69F, V69, V69F or 135, 14 days; over itself, 30 days; over 750, 1075 or 1075U, 45 days; over 73, 90-97, H90-97, 91-H²O or 94-H²O, 90 days.

Volume Solids

54.0 ± 2.0% (mixed) †

Number of Components

Two: Part A and Part B

Volatile Organic Compounds

Unthinned: 0.77 lbs/gallon (93 grams/litre)
Thinned 10% (No. 65 Thinner): 0.77 lbs/gallon (93 grams/litre)
Thinned 10% (No. 63 Thinner): 1.58 lbs/gallon (189 grams/litre) (TBAc Exempt)
Thinned 8% (No. 63 Thinner): 2.03 lbs/gallon (244 grams/litre) (TBAc Non-Exempt) †

Primers

Series 1, 27, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H²O, 94-H²O, 135, 394. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1072V.

Recommended DFT

2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close