Series 215ML
Mat-Reinforced Epoxy Lining
Generic Type
Modified Polyamine Epoxy
Common Usage
Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI Std. 61. Ambient cured Series 215 is qualified for use on the interior of potable water storage tanks and reservoirs of 200 gallons (757 L) capacity or greater at 95 mils DFT with fiberglass mat. Return to immersion is seven days. Contact your Tnemec representative for approved systems and additional information on potential uses.
View more product detailsProduct Data Sheets
- English_Series_215Ml_Mat_Reinforced_Epoxy_Lining_pds.pdf
- Spanish_Series_215Ml_Mat_Reinforced_Epoxy_Lining_pds.pdf
Safety Data Sheets
- English_Series_215Ml_Mat_Reinforced_Epoxy_Lining_sds.pdf
- Spanish_Series_215Ml_Mat_Reinforced_Epoxy_Lining_sds.pdf
Contact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Volume Solids
100% (Mixed) †
Recommended DFT
60.0 to 80.0 mils (1524 to 2032 microns)
Surfacer/Filler/Patcher
Self-patching or Series 217, 218
Topcoats
Series 22
HAPS
Unthinned: 0.0 lbs/gal solids
Number of Components
Three: Liquids Part A (amine), Part B (epoxy), Fiberglass Reinforcing Mat Part C (S211-0215).
Curing Time
---
|Temperature || To Touch || Dry Through || Maximum to Recoat ‡ |
| 95°F (35°C) || 4 hours || 12 hours || 14 days|
| 75°F (24°C) || 10 hours || 24 hours || 21 days|
| 55°F (13°C) || 18 hours || 48 hours || 21 days |
| 45°F (7°C) || 24 hours || 72 hours || 21 days |
| 35°F (2°C) || 32 hours || 96 hours || 21 days |
---‡ Note: If the Series 215ML surface is exterior exposed for more than seven days, scarification is required before topcoating.
Volatile Organic Compounds
Unthinned: 0.08 lbs/gal solids (10 grams/litre) †
Primers
Concrete: Series L140F, N140F, V140F. Note: Series L140F, N140F, and V140F have a maximum recoat time of 7 days when topcoating with Series 215ML. If the maximum recoat time is exceeded, the coating surface must be uniformly scarified by abrasive blasting with fine abrasive before application of Series 215ML.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep