Series 1071V

Fluoronar

Generic Type

Advanced Thermoset Solution Fluoropolymer

Common Usage

A low VOC, fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.

Special Qualifications

Series 1071V meets the requirements of LEED-Low-Emitting Materials, Collaborative for High Performance Schools-Paints & Coatings, WELL Building Standard-VOC Restrictions, and Living Building Challenge–Healthy Interior Performance. Contact your Tnemec representative for more information.

View more product details

Colors

    This product is available in 503 colors.

View Available Colors

View available colors in our Color Tool; you can also select and request color swatches.

Theoretical Coverage

978 mil sq ft/gal (24.0 m²/L at 25 microns) †

Intermediate

Series 73, 750, 1075, 1075U, 1095 (Intermediate coat may be required for some applications, please contact your Tnemec coating consultant.)

Note: When topcoating with Series 1071V, the following maximum recoat times apply: Over 27, 66, L69, L69F, N69, N69F, V69, V69F, 135, 161, 14 days; over itself and 90-75, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1, 394, 60 days; over 27WB, 73, 90-97, H90-97, 91-H²O, 94-H²O, 1224, 90 days.

Primers

Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-75, 90-97, H90-97, 91-H²O, 94-H²O, 115, 118, 135, 161, 394, 1224. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1071V. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.

Curing Time

Temperature To Touch To Handle Minimum Recoat ‡
90°F (32°C) 30 minutes 4-6 hours 6-8 hours
70°F (21°C) 30 minutes 6-8 hours 10-12 hours
50°F (10°C) 1 hour 12-15 hours 16-24 hours

‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness.
Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.

Number of Components

Two: Part A and Part B

HAPS

Unthinned: 0.29 lbs/gal solids
Thinned 10% (No. 65 Thinner): 0.29 lbs/gal solids
Thinned 10% (No. 63 Thinner): 0.35 lbs/gal solids †

Finish

Semi-Gloss

Volume Solids

61.0 ± 2.0% (mixed) †

Volatile Organic Compounds

Unthinned: 1.11 lbs/gallon (133 grams/litre)
Unthinned: 0.55 lbs/gallon (66 grams/litre) (TBAc Exempt)
Thinned 10% (No. 65 Thinner): 1.87 lbs/gallon (224 grams/litre)
Thinned 10% (No. 65 Thinner): 0.55 lbs/gallon (66 grams/litre) (TBAc Exempt)
Thinned 10% (No. 63 Thinner): 1.77 lbs/gallon (213 grams/litre)
Thinned 10% (No. 63 Thinner): 1.35 lbs/gallon (161 grams/litre) (TBAc Exempt) †

Recommended DFT

2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool

Close

Color Swatch packet

When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close