Series L140
Pota-Pox Plus
Generic Type
Polyamidoamine Epoxy
Common Usage
Versatile epoxy coating for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks that contain demineralized, deionized or distilled water.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI Std. 61. Series L140 (with or without 44-700 Epoxy Accelerator) is qualified for use on tanks of 50,000 gallons (189,270.6L) capacity or greater and fittings one (1) inch (2.5 cm) in diameter or greater. Reference Tnemec's certified product listing at www.nsf.org for details on maximum allowable DFT.
View more product detailsProduct Data Sheets
- English_Series_L140_Pota_Pox_Plus_pds.pdf
- French_Series_L140_Pota_Pox_Plus_pds.pdf
- Spanish_Series_L140_Pota_Pox_Plus_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
HAPS
Unthinned: 0 lbs/gal solids
Thinned 5% (No. 49 Thinner): 0 lbs/gal solids
Theoretical Coverage
1,043 mil sq ft/gal (25.6 m²/L at 25 microns). See APPLICATION for coverage rates. †
Topcoats
Interior: Series 22, FC22, L140, L140F, N140, N140F, V140, V140F, 141
Exterior: Series 27, 27WB, 30, 66, L69, L69F, N69, N69F, V69, V69F, 72, 73, 118, L140, L140F, N140, N140F, V140, V140F, 156, 157, 161, 180, 181, 446, 700, V700, 701, V701, 740, 750, 1026, 1028, 1029, 1074, 1074U, 1075, 1075U, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: When topcoating with Series 700, V700, 701 or V701, an intermediate coat of Series 73, 1075, 1075U, 1095 or 1096 is required. Note: The following recoat times apply for Series L140: Immersion Service—Surface must be scarified after 60 days. Atmospheric Service—After 60 days, scarification or an epoxy tie-coat is required. When topcoating with Series 740 or 750, recoat time for L140 is 21 days. Contact your Tnemec representative for specific recommendations.
Recommended DFT
2.0 to 10.0 mils (50 to 255 microns) per coat. Note: Dry film thickness that exceeds published recommendations but is in compliance with SSPC PA-2 and ANSI/NSF Std. 61 certifications, is acceptable. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Volume Solids
65.0 ± 2.0% (mixed) †
Volatile Organic Compounds
Unthinned: 0.81 lbs/gallon (97 grams/litre)
Thinned 5% (No. 49 Thinner): 0.81 lbs/gallon (97 grams/litre) †
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep