Advanced Thermoset Solution Fluoropolymer
A high-solids fluoropolymer coating that provides an ultra-durable finish with user friendly brush, roll and conventional spray application. It has outstanding color and gloss retention even in the most severe exposures. Under certain conditions, it may be used to restore aged fluoropolymer coil applied coatings or for OEM applications. Contact Tnemec Technical Services or your local Tnemec representative for details.
Series 1070 meets the exterior weathering requirements of AAMA 2604-98.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
This product is available in 503 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Unthinned: 4.1 lbs/gal solids
Thinned 5% (No. 63 Thinner): 4.1 lbs/gal solids
Note: When topcoating with Series 1070, the following maximum recoat times apply: Over 27, 66, L69, L69F, N69, N69F, V69, V69F, 135, or 161, 14 days; over itself, 30 days; over 750, 1075, 1075U, 1095, 45 days; over 1 and 394, 60 days; over 73, 90-97, H90-97, 91-H²O, 94-H²O, 1224, 90 days.
Volatile Organic Compounds
Unthinned: 2.93 lbs/gallon (351 grams/litre)
Thinned 5% (No. 63 Thinner): 3.10 lbs/gallon (371 grams/litre)
Series 1, 27, 27WB, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, H90-97, 91-H²O, 94-H²O, 118, 135, 161, 394, 1224. Note: Series 1 and 394 require an intermediate coat prior to topcoating with Series 1070. Note: Series 118 is typically used to overcoat, sound, existing coating systems. See product data sheet for more information.
|Temperature||To Touch||To Handle||Minimum Recoat ‡|
|90°F (32°C)||30 minutes||4-6 hours||6-8 hours|
|70°F (21°C)||30 minutes||6-8 hours||10-12 hours|
|50°F (10°C)||1 hour||12-15 hours||16-24 hours|
‡ Maximum recoat: 30 days. Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator; see separate product data sheet.
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Number of Components
Two: Part A and Part B
962 mil sq ft/gal (23.6 m²/L at 25 microns). †
60.0 ± 2.0% (mixed) †
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep