High gloss industrial enamel offering good flow, hiding and protection for recommended surfaces in mild to moderately severe exposures. Not for use on surfaces that are continually wet or sweat frequently.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
This product is available in 502 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Number of Components
Volatile Organic Compounds
Unthinned: 3.21 lbs/gallon (384 grams/litre)
Thinned 8%: 3.45 lbs/gallon (413 grams/litre) †
Steel: Series 1, 10, 37H, 66, N69, 88HS, 530
Galvanized Steel and Non-Ferrous Metal: Series 66 or N69. Note: Series 66 or N69 exterior exposed for 3 weeks or longer requires an epoxy-polyamide intermediate coat or scarification prior to topcoating with 2H. Brush blasting with fine abrasive is the preferred method of scarification.
Wood: Series 36-603
1.5 to 3.5 mils (40 to 90 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
786 mil sq ft/gal (19.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
|Temperature||To Touch||To Handle||To Recoat|
|75°F (24°C)||6-9 hours||10-16 hours||12-24 hours|
Curing time varies with surface temperature, air movement, humidity and film thickness.
Water Tank Exteriors: Five days or more curing time required before filling with water.
49.0 ± 2.0% †
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep