Chemical- and abrasion-resistant elastomeric membrane with exceptional strength and flexibility. Ideally suited for environmental requirements of waste containment for primary or secondary containment. Spray applied, it forms the monolithic, impermeable liner required for earth collection and catch basins, decorative ponds and fountains, reservoirs, cooling towers, dams and spillways.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
1,396 mil sq ft/gal (34.2 m²/L at 25 microns). See APPLICATION for coverage rates.
Series 156 – Optional, when additional UV protection or a color coat is desired for secondary containment. Series 156 is not recommended for immersion service.
50 to 100 dry mils (1270 to 2540 microns) by spray. Multiple passes at timed intervals are required to achieve recommended dry film thickness on vertical surfaces. Timing is dependent upon material and substrate temperatures. See the Elasto-Shield Application Guide for additional instructions. Up to 125 mils (3175 microns) per coat by squeegee.
88.0 ± 2.0% (mixed)
|75°F (24°C) t 50 mils||3 to 4 hours||3 hours||48 hours|
Curing time varies with air & substrate temperature, air movement, humidity and film thickness. Note: Contact your Tnemec representative for curing times involving severe abrasion and traffic applications. Also, scarify the surface and apply a coat of Series V260 Tneme-Bond before recoating if the maximum recoat time has been exceeded.
Number of Components
Two: Part A (resin) and Part B (iso)
Volatile Organic Compounds
0.76 lbs/gallon (92 grams/litre)
Gloss. Note: Prolonged exterior exposure will cause flattening of the finish.
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep