Series G436

Perma-Shield FR

Generic Type

Fiber-Reinforced Modified Polyamine Epoxy

Common Usage

A thick film, 100% solids, spray-applied, abrasion-resistant coating designed for wastewater immersion and fume environments. Provides excellent resistance to H2S gas permeation, protects against MIC and provides chemical resistance to severe wastewater environments. Fiber-reinforcement provides superior physical strength and higher film build.

View more product details

Volatile Organic Compounds

EPA Method 24:
0.32 lbs/gallon (38 grams/litre)



Volume Solids

100% (mixed)


Series 435 (optional)


Concrete: Self-priming or Series 201.

Recommended DFT

Concrete: 50.0 to 125.0 mils (1270 to 3175 microns) in one or two coats. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.

Theoretical Coverage

1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.


Series 215, 217, 218

Number of Components

Two: Part A (Epoxy) and Part B (Amine)


0.01 lbs/gallon solids

Curing Time

Temperature To Touch Dry Through To Place in Service Max. Recoat
75°F (24°C) 3 hours 14 hours 2 days 7 days
55°F (13°C) 7 hours 30 hours 3 days 7 days

Note: If more than 7 days have elapsed between coats, the Series 436 coated surface must be mechanically abraded before topcoating. Curing time will vary with surface temperature, air movement, humidity and film thickness.

Still have questions? Request the information you’re looking for:

Request Info

How to Purchase

Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep

Continue Exploring in the color tool


Color Swatch packet

When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool