Series 90-94
Tneme-Zinc
Product is made to order for specific projects. Contact your Tnemec Representative for additional information.
Generic Type
Polyamide Epoxy Zinc Rich
Common Usage
An advanced technology, three-component, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.
Special Qualifications
Tneme-Zinc uses a zinc pigment which meets the requirements of ASTM D 520 Type III and contains less than .002% lead. This level qualifies it to be classed as "non-lead" (less than 0.009% lead by weight) as defined in 16 CFR Part 1303 of the Consumer Product Safety Commission regulations. Conforms to SSPC Paint 20, Type II.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Recommended DFT
3.0 to 5.0 mils (76 to 127 microns)
Curing Time
| Temperature | To Touch | To Handle | To Recoat |
|---|---|---|---|
| 75°F (24°C) | 15 minutes | 4 hours | 6 hours |
HAPS
5.48 lbs/gal solids
Number of Components
Three: Part A, Part B, and C
Volume Solids
68% ± 2.0% (mixed)
Theoretical Coverage
1,043 mil sq ft/gal (25.6 m²/L at 25 microns at 25 microns) See APPLICATION for coverage rates.
Volatile Organic Compounds
Unthinned: 2.23 lbs/gallon (267.8 grams/litre)
Thinned 15% (No. 4 Thinner): 2.83 lbs/gallon (339.9 grams/litre)
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep