Modified Polyamine Epoxy
An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water and wastewater environments. Specialized curing mechanism allows for faster cure response with airless spray application.
Series 22-WH11 Off-White, 22-1218 Light Blue and 22-1255 Beige are certified by NSF International in accordance with NSF/ANSI/CAN Std. 61 and the extraction requirements of NSF/ANSI/CAN 600 and are qualified for use on tanks and reservoirs of 50 gallons (189 L) capacity or greater, pipes 10 inches (25.4 cm) diameter or greater, pumps 1/2 inch (1.3 cm) in diameter or greater, valves 1/2 inch (1.3 cm) diameter or greater and fittings 1/2 inch (1.3 cm) in diameter or greater. Series 91-H2O, 94-H2O, N140, N140F, V140 and V140F are the only Std. 61 certified primers for use with Series 22. Reference Tnemec’s certified product listing at www.nsf.org for details on the maximum allowable DFT. Series 22 conforms to AWWA C 210.View more product details
Product Data Sheets
Safety Data SheetsEmail this product
Unthinned: 0.0 lbs/gal solids
Thinned 5%: 0.37 lbs/gal solids
Steel: Self-priming, 66, L69, L69F, N69, N69F, 90-97, H90-97, 90G-1K97, 91-H²O, 94-H²O, L140, L140F, N140, N140F, V140, V140F, 161. Note: The following maximum recoat time applies: over Series 66, L69, N69, L140, N140, V140 or 161, 60 days; over Series L69F, N69F, V69F, L140F, N140F or V140F, 30 days. If the maximum recoat time has been exceeded, the primed surface must be scarified prior to topcoating with Series 22.
|Temperature||To Touch||Dry Through||Minimum to Recoat||Return to Service||Maximum to Recoat|
|95°F (35°C)||2 1/2 hours||5 1/2 hours||4 hours||5 days||7 days|
|75°F (24°C)||7 hours||18 hours||16 hours||5 days||7 days|
|50°F (10°C)||24 hours||27 hours||32 hours||7 days||7 days|
Note: These cure times are based on 20.0 mil (500 micron) dry film thickness. Cure time varies with surface temperature, air movement, humidity, and film thickness. Ventilation: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure.
16 to 40 mils (400 to 1015 microns). Note: For multiple coat applications a minimum 12 mils per coat is required. Note: Dry film thickness that exceeds published recommendations but is in compliance with SSPC PA-2 and ANSI/NSF/CAN Std. 61 certifications is acceptable.
Number of Components
Two: Part A (polyamine) and Part B (epoxy)
Volatile Organic Compounds
Unthinned: 0.10 lbs/gallon (12 grams/litre)
Thinned 5%: 0.44 lbs/gallon (52 grams/litre) †
Series 73, 700, V700, 701, V701, 740, 750, 1028, 1029, 1074, 1074U, 1075, 1075U, 1080, 1081, 1094, 1095, 1096. Note: Series 22 exterior (sunlight) exposed for longer than maximum recoat requires scarification by abrasive blasting prior to topcoating.
100% (mixed) †
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Still have questions? Request the information you’re looking for:Request Info
How to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep