Series 1416
Vinester
Generic Type
Novolac Vinyl Ester
Common Usage
This extremely corrosion resistant coating is used as the base product for many reinforced applications due to the versatility provided from the product being supplied as “neat” or non-pigmented. Series 1416 is the best selection for strong acid conditions and when temperatures above ambient conditions are expected. Use this product to add specialty mortar powders, to embed glass mats, as a saturant coat, or as a pigmented self-leveling finish coat. Combine with LavaCrete Part C aggregate to create an enhanced corrosion resistant polymer concrete. Series 1416 was formerly ProPolymer 4847.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Recommended DFT
Topcoat Application: 30.0 mils (760 microns)
Mortar Applications: +50.0 mils (+1270 microns)
Abrasion Resistant Applications: +50.0 mils (+1270 microns)
Finish
Semi-gloss
Curing Time
| Temperature | To Recoat | Immersion | Maximum Recoat |
|---|---|---|---|
| 90°F (32°C) | 3 hours | 24 hours | 3 days |
| 75°F (24°C) | 4 hours | 48 hours | 5 days |
| 60°F (16°C) | 12 hours | 4 days | 7 days |
Recoat times are typical for coating to be dry-to-touch and ready for the next application. Immersion and certain other services may require longer cure times and/or elevated temperature post cure for optimal performance. ASTM D2583 Barcol Hardness check is also recommended, minimum 40. Coating that has exceeded its maximum recoat time should be checked for styrene or acetone sensitivity or uniformly scarified to assure secondary bonding. Consult Tnemec Technical Services and Technical Bulletin 22-119 R1.
Number of Components
Two: Part A (base) and Part B (catalyst)
Volume Solids
85.0 ± 2.0% (mixed). Series 1416 contains a reactive monomer and some loss will occur during application and cure. Actual solids by volume will vary depending upon temperature and air movement.
Surfacer/Filler/Patcher
Series 215, 217, 252SC ChemBloc (MCK) mortar. Note: The following products can be used as a surfacer, filler, or patcher by mixing with 211-9111 Bulking Additive: Series 120-5002, 251SC, 1402, 1407, 1415, 1416, and 1418. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs (reference Technical Bulletin 99-22). For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Volatile Organic Compounds
EPA Method 24
0.63 lbs/gallon (75 grams/litre)
Primers
Self-priming on steel or Series 1402, 1407. Note: For services above 180°F (82°C), do not use a primer.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep
Support Documents
Vinester Color Card APP GUIDE Series 1416 Vinester 60 Mil Broadcast APP GUIDE_Series 1416 Vinester_125-Mil Silica-Free Mortar Reinforced.pdf APP GUIDE_Series 1416 Vinester_90-Mil Glass Mat Reinforced.pdf APP GUIDE_Series 1416 Vinester_90-Mil Silica-Free Mortar.pdf APP GUIDE_Series 1416 Vinester_150-Mil Glass Roving & Abrasion.pdf APP GUIDE_Series 1416 Vinester_150-Mil Glass Roving Reinforced.pdf