Series 282
Tneme-Glaze
Generic Type
Polyamine Novolac Epoxy
Common Usage
A highly chemical- and solvent-resistant colored novolac glaze coating for walls, floors and other surfaces. Provides improved aesthetics and additional protection against abrasion, impact, and most acids, alkalis and solvents.
View more product detailsProduct Data Sheets
- English_Series_282_Tneme_Glaze_pds.pdf
- French_Series_282_Tneme_Glaze_pds.pdf
- Spanish_Series_282_Tneme_Glaze_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
Unthinned: 0.19 lbs/gallon (23 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Topcoats
Series 282
Primers
Concrete: Self-priming or Series 27WB, 201, 205, 208, 237, 238, 239, 241. CMU: Self-priming over filled CMU
Wall board, Wood & Drywall: Self-priming or Series 201
Curing Time
| Temperature | To Topcoat | To Place in Service • | Full Cure |
|---|---|---|---|
| 75°F (24°C) | 8-24 hours | 24 hours | 5 days |
If more than 24 hours have elapsed between coats, the Tneme-Glaze coated surface must be mechanically abraded before topcoating. • Note: 24 hour cure provides for traffic, secondary containment and certain mild chemical exposures. Up to five days cure is required for certain severe chemical exposures. Contact your Tnemec representative or Tnemec Technical Services.
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Recommended DFT
Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat.
Additional coats may be required for appearance or hiding.
Number of Components
Two: Part A and Part B (1 Part A to 1 Part B by volume)
Surfacer/Filler/Patcher
Series 130, 215, 218, 1254. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Finish
Gloss. (Roller application provides an orange peel finish.)
Volume Solids
100% (mixed) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep