Series 113
H.B. Tneme-Tufcoat
Generic Type
Waterborne Acrylic Epoxy
Common Usage
High performance coating suitable for concrete, steel and other commonly used building materials. Features include high-build, low odor, non-yellowing white and fade resistant colors; easy cleanup and stain-, abrasion-, chemical- and moisture-resistance. Good exterior performance.
View more product detailsProduct Data Sheets
- English_Series_113_Hb_Tneme_Tufcoat_pds.pdf
- French_Series_113_Hb_Tneme_Tufcoat_pds.pdf
- Spanish_Series_113_Hb_Tneme_Tufcoat_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 501 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
Volatile Organic Compounds
Unthinned
1.90 lbs/gallon (228 grams/litre)
Thinned 5% (No. 59 Thinner)
2.03 lbs/gallon (243 grams/litre) †
HAPS
Unthinned: 2.59 lbs/gal solids
Thinned 5% (No. 59 Thinner): 2.82 lbs/gal solids
Finish
Satin
Primers
Steel: Series 1, 10, 27, 37H, 66, N69, N69F, 90E-92, 90-97, H90-97, 115, 394, 530. Note: Series 10 and 37H are not recommended for frequently wet conditions. Allow Series 10 to cure one week and 37H to cure 30 days before topcoating. Note: When topcoating Series 1 or 394 with 113, maximum recoat time is three days.
Galvanized Steel and Non-Ferrous Metal: Series 66, N69, N69F, 115
Dense Concrete: Self-priming, Series 130, 218
CMU: Series 54, 130, 218
Drywall: Series 151
Wood: Dry interior environments only, self-priming, Series 10-99W, 151-1051
Volume Solids
44.0 ± 2.0% (mixed) †
Curing Time
| Temperature | To Touch | To Handle | To Recoat |
|---|---|---|---|
| 75°F (24°C) | 30-45 minutes | 2-3 hours | 1-2 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Theoretical Coverage
706 mil sq ft/gal (17.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components
Two: One Part A (4.5 gal) and One Part B (1/2 gal)
Recommended DFT
4.0 to 6.0 mils (100 to 150 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep