Series 247
EverThane
Generic Type
Aliphatic Moisture Cured Urethane
Common Usage
Extremely hard, chemical-resistant urethane floor coating with superb flow characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space. Note: For horizontal surfaces only.
Special Qualifications
Series 247 was tested in accordance with, and passed, the California Department of Public Health CDPH/EHLB/Standard
Method Version 1.1, 2010 emissions testing and meets qualifications of LEED v4, Collaborative for High Performance
Schools, and Living Building Challenge.
Product Data Sheets
- English_Series_247_Everthane_pds.pdf
- French_Series_247_Everthane_pds.pdf
- Spanish_Series_247_Everthane_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Intermediate
Series 66, 66HS, 161, 161HS, 210, 237, 238, 256, 280, 281, 284, 285, 287
Note: Before applying Series 247 over coatings with a smooth, glossy surface, thoroughly scarify the previous coating using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad to eliminate surface tension. Failing to uniformly degloss the entire surface or thoroughly clean all surface contamination may lead to fisheyes and/or poor adhesion. Sanding or scarification is not required when topcoating textured coatings (i.e. aggregate or colored quartz broadcast to refusal) with Series 247 if the maximum recoat time of the previous coating is met. Note: When applying Series 247 over a broadcast or mortar system, an epoxy grout coat is required.
Finish
Gloss
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Number of coats will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
Volatile Organic Compounds
Unthinned: 0.74 lbs/gallon (89 grams/litre) †
Number of Components
Two: Part A and Part B (clear).
Primers
Concrete: Series 66, 66HS, 161, 161HS, 201, 205, 237, 238, 256, 280, 281, 287. Note: Series 247 can be applied directly to concrete if a single coat urethane sealer is desired.
Volume Solids
91 ± 2.0% (clear mixed) †
Theoretical Coverage
1,460 mil sq ft/gal (36.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Curing Time
| Temperature | Min. Recoat ‡ | To Service | Chemical Resistance |
|---|---|---|---|
| 75°F (24°C) | 12 hours | 24 hours | 7 days |
‡ When recoating, the surface must be thoroughly scarified using 60 grit sandpaper or No. 60 mesh sanding screen.
Curing time varies with surface temperature, air movement, humidity and film thickness.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep