Series 20 | Pota-Pox

• Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamide Epoxy

Industry standard for potable water epoxy coatings for nearly 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for its benchmark performance.

Series FC20 | Pota-Pox

• Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamide Epoxy

Fast-curing protective coating for use in steel and concrete structures. Contact your Tnemec representative for other systems and additional information on potential uses.

Series 21 | Epoxoline

• For Steel, Concrete, Other
• Generic Description Phenalkamine Epoxy

High solids, immersion-grade coating offering exceptional build per coat for long-term corrosion resistance. For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment, as well as other steel and concrete substrates. Specially formulated to meet the latest requirements for use in potable water applications.

Series 22 | Epoxoline

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids, high-build epoxy for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion service in potable water and wastewater environments. Specialized curing mechanism allows for faster cure response with airless spray application.

Series FC22 | Epoxoline

• Uses Top and Finish Coats
• For Steel, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids epoxy liner for the protection of steel and concrete. It provides excellent resistance to abrasion and is suitable for immersion and chemical contact. For use on the interior and exterior of steel or concrete tanks, reservoirs, and pipes in potable water service.

Series 27 | F.C. Typoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For Steel, Other
• Generic Description Polyamide Epoxy
• Finish Flat

Versatile low-temperature coating ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.

Series 27WB | Typoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Original Equipment Manufacturer (OEM)
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Inorganic Hybrid Water-Based Epoxy
• Finish Satin

A unique, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid handling properties. Series 27WB exhibits low yellowing and good color stability in whites and light tone colors. Formula protected under U.S. patent.

Series 43-236 | Fast Dry Aluminum

• Uses Top and Finish Coats
• For Steel
• Generic Description Copolymer Aluminum
• Finish Semi-Gloss

Fast drying spray-applied coating offering good protection for most exterior weathering conditions. *Note:* Series 43-236's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 43-36 | Chrome Aluminum

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Alkyd Aluminum
• Finish Low sheen

Metallic aluminum finish for protection against weather, heat and mild industrial fumes. Used on primed or previously-painted carbon and galvanized steel: tank exteriors, piping, equipment and structures. Not for immersion service.

Series 66 | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

Industry standard for epoxy coatings for over 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for benchmark performance.

Series 66HS | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

• Product is made to order for specific projects. Contact your Tnemec Representative for additional information.

A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.

Series L69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized, or distilled water. Can serve as a block filler on cementitious or masonry substrates.

Series L69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

A versatile, low VOC, factory-accelerated epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals.

Series N69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for protection and finishing of steel and concrete in commercial, industrial and marine environments. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series N69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.

Series V69 | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series V69F | Hi-Build Epoxoline II

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamidoamine Epoxy
• Finish Satin

An advanced generation epoxy for the protection and finishing of steel and concrete. It has excellent resistance to abrasion and is suitable for immersion as well as chemical contact exposure. Contact your local Tnemec representative for a list of chemicals. This product can also be used as a block filler on cementitious or masonry substrates.

Series 72 | Endura-Shield

• Uses Top and Finish Coats
• For Steel
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Gloss

A durable topcoat for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 73 | Endura-Shield

• Uses Intermediate Coats, Original Equipment Manufacturer (OEM), Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 90G-1K97 | Tneme-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Polyurethane, Zinc-Rich

An advanced technology, single-component, moisture-cured, zinc-rich primer providing extraordinary performance, user-friendly and easy application. Also used for field touch-up of inorganic zinc coating.

Series 90-97 | Tneme-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Urethane, Zinc-Rich

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It’s user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the “same-day.” Also used for field touch-up of inorganic zinc coating. Application methods include “dry-fall” under certain conditions (see Application).

Series H90-97 | Tneme-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Urethane, Zinc-Rich

An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the "same-day." Also used for field touch-up of inorganic zinc coating. H90-97 is HAPS compliant for use in-shop.

Series 91-H2O | Hydro-Zinc

• Uses Primer and/or Block Fillers
• For Steel, Ductile Iron, Pipes & Fittings
• Generic Description Aromatic Urethane, Zinc-Rich

A two-component, moisture-cured, zinc-rich primer for the interior and exterior of steel potable water tanks. Provides outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec potable water tank coatings. It cures quickly and can be topcoated the same day at surface temperatures down to 35°F (2°C). Series 91-H_2_O has no maximum recoat time, making it ideally suited as a primer for both sides of plate steel surfaces in water tank fabrication shops. Application methods include “dry-fall” under certain conditions (see Application). *Note:* When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.

Series 94-H2O | Hydro-Zinc

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Aromatic Urethane, Zinc-Rich

A single-component, moisture-cured, zinc-rich primer for steel structures, including the interior and exterior of steel potable water tanks. Commonly used in commercial, industrial, and marine markets in various applications to provide outstanding long-term corrosion resistance when used as a primer in conjunction with other Tnemec coatings. Series 94-H_2_O has no maximum recoat time, cures quickly and offers rapid recoat at surface temperatures down to 35°F (2°C). *Note:* When used in conjunction with cathodic protection, anodes or impressed current systems should not provide current demand more negative than –1.05 volts relative to a copper–copper sulfate reference electrode half-cell.

Series 115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: *Exterior Steel:* Waterborne, rust-inhibitive coating with excellent adhesion to zinc-rich coatings. Used as a primer, intermediate and finish coat on tanks, vessels and other industrial and architectural metal substrates. *Humid Environments:* Primer/finish for two coat applications over prepared galvanized steel and zinc-rich coatings in wet, temperature-controlled exposure areas. *Dry Interior Environments:* One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. *Note:* Uni-Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series V115 | Uni-Bond DF

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Self-crosslinking Hydrophobic Acrylic
• Finish Eggshell

A high-performance, versatile coating appropriate for a variety of uses including: *Exterior Steel:* Waterborne, rust-inhibitive coating with excellent adhesion to organic zinc-rich coatings. Used as a primer, intermediate or finish coat on tanks, vessels and other industrial and architectural metal substrates. *Humid Environments:* Primer/finish for two coat applications over prepared galvanized steel and organic zinc-rich coatings in wet, temperature-controlled exposure areas. *Dry Interior Environments:* One or two coat, flash-rust and corrosion resistant primer/finish for overheads. Use on prepared carbon and galvanized steel, aluminum, wood and concrete decks, beams, joists and HVAC. *Note:* Uni Bond DF's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 118 | Uni-Bond Mastic

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Mastic Waterborne Acrylic
• Finish Matte

A high-build, rust-inhibitive, elastomeric coating formulated for exceptional adhesion and corrosion resistance over minimally prepared aged coating systems. Series 118 is an excellent choice for projects where abrasive blast cleaning of the substrate is not possible and an anti-corrosive coating is needed. Uni-Bond Mastic accepts a variety of high-performance topcoats for the creation of a long-term protective and aesthetic coating system. Coating film can be reinforced and strengthened with a variety of mesh options when dictated by exposure conditions and service environments.

Series 135 | Chembuild

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Modified Polyamidoamine Epoxy
• Finish Semi-gloss

High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.

Series L140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative, low VOC potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, and fittings in potable water service.

Series L140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Versatile epoxy coating (factory accelerated version of L140) for protection and finishing of steel. It has excellent resistance to abrasion and is suitable for immersion service. This product can be used for lining storage tanks that contain demineralized, deionized or distilled water.

Series N140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.

Series N140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.

Series V140 | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.

Series V140F | Pota-Pox Plus

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Polyamidoamine Epoxy

Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps and equipment in potable water service.

Series 151-1051 | Elasto-Grip FC

• Uses Primer and/or Block Fillers
• For DryWall and Gypsum, Masonry & Stucco, Other
• Generic Description Waterborne Modified Polyamine Epoxy
• Finish Matte

Penetrating, flexible and low-odor primer for sealing cementitious and other porous substrates. Also excellent as a tie-coat for specialized finishes over sound existing coatings.

Series 156 | Enviro-Crete

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Modified Waterborne Acrylate
• Finish Matte — Smooth

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light. Series 156 can also be used as a low cohesive stress overcoat for aged oil or alkyd systems.

Series 157 | Enviro-Crete

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Modified Waterborne Acrylate
• Finish Matte — Sand Texture

Flexible, breathable coating primarily for concrete and masonry that can fill and bridge minor hairline cracks. Excellent elastomeric protection against driving rain, alternate freezing-thawing and UV light.

Series 215 | Surfacing Epoxy

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy
• Finish Semi-Gloss

An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series 215ML | Mat-Reinforced Epoxy Lining

• Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Modified Polyamine Epoxy

Series 215ML is a trowel applied, fiberglass mat reinforced, 100% solids polyamine epoxy used as part of a lining system for potable and non-potable ultra-filtration membrane process, backwash, and neutralization basins.

Series 217 | MortarCrete

• Uses Surfacer, Filler, Patcher
• For Concrete
• Generic Description Calcium Sulfoaluminate Cementitious Repair Mortar and Concrete

A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete.

Series 218 | MortarClad

• Uses Surfacer, Filler, Patcher
• For Masonry & Stucco, Concrete
• Generic Description Epoxy Modified Cementitious Mortar

A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series 218-1000 | MortarClad

• Uses Surfacer, Filler, Patcher
• For Concrete
• Generic Description Epoxy Modified Cementitious Mortar

A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.

Series V260 | Tneme-Bond Clear

• For Concrete
• Generic Description Organo Silane

A chemically active, low voc solution used to promote the adhesion of Series 262, 264 or 265 when recoating with itself if maximum cure time has been exceeded.

Series 264 | Elasto-Shield

• Uses Linings & Secondary Containment
• For Steel, Concrete, Other
• Generic Description Modified Polyurethane
• Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.

Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment.

Series 265 | Elasto-Shield TG

• Uses Surfacer, Filler, Patcher
• For Steel, Concrete, Other
• Generic Description Modified Polyurethane

A trowel-grade compound for use with Elasto-Shield products. Used to fill and repair cracks, bugholes, spalled or otherwise damaged concrete, masonry and asphalt. Also used for sealing the edges of faying surfaces, sealing seams, filling pits and encapsulating rivet and bolt heads on the interior of steel tanks.

Series 406 | Elasto-Shield

• Uses Linings & Secondary Containment
• For Steel, Concrete
• Generic Description Aromatic Polyurethane Hybrid

A two-component, fast setting, monolithic coating designed to provide a durable polyurethane lining in a single-coat, multi-pass spray application applied with plural component equipment. This high performance coating has excellent chemical, thermal shock and abrasion resistance. It is ideal for application to steel or concrete in water and wastewater treatment, secondary containment and for tank linings and bottoms. Recommended for immersion service. *Note:* All orders are subject to approval based upon project scope, applicator qualification and appropriate equipment configuration.

Series V530 | Omnithane

• Uses Primer and/or Block Fillers, Top and Finish Coats
• For Steel
• Generic Description Moisture-Cured Aromatic Urethane
• Finish Matte

Aluminum pigmented primer or finish for marginally cleaned steel. Provides excellent abrasion-, moisture-, chemical- and corrosion-resistance. Suitable for use as a topcoat where an aluminum finish is desired. Topcoating provides enhancement of systems and more latitude with color. Compatible with aged coatings, but verify with test patch.

Series 700 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.

Series V700 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Gloss

A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.

Series 701 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-gloss

An exterior finish coat especially designed for tanks and other exposed steel substrates. HydroFlon has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.

Series V701 | HydroFlon

• Uses Top and Finish Coats
• For Steel, Other
• Generic Description Advanced Thermoset Solution Fluoropolymer
• Finish Semi-Gloss

A low VOC exterior finish coat especially designed for tanks and other exposed steel substrates. This product has outstanding resistance to ultra-violet light degradation providing unprecedented long-term gloss and color retention with excellent resistance to abrasion and chalking. It is aesthetically pleasing and recommended for coastal environments and on structures where extremely long-term maintenance cycles are desired. NOT FOR IMMERSION SERVICE.

Series 740 | UVX

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Modified Polycarbamide
• Finish Gloss

An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to abrasion and exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.

Series 750 | UVX

• Uses Top and Finish Coats
• For Steel, Concrete, Other
• Generic Description Modified Polycarbamide
• Finish Semi-gloss

An advanced technology finish coat combining low VOC with exceptional performance. Offers superior color and gloss retention compared to traditional polyurethanes for long-term aesthetics on a wide range of exterior structures. Durable film stands up to exterior weathering. Very good brush, roll and spray application characteristics. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application. NOT FOR IMMERSION SERVICE.

Series 945 | Aerolon Tape

• Uses Insulating
• For DryWall and Gypsum, Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Insulative Tape, Self-adhesive

An innovative, self-adhesive thermally insulative tape that contains a proprietary blend of insulative particles for exceptionally low thermal conductivity. Excellent for controlling condensation and providing thermal efficiency on processing equipment such as tanks, pipes, and valves. It is also a highly effective thermal break for mitigating condensation on architectural components which transmit outside temperatures through the building envelope. Series 945 Aerolon Tape is available in multiple widths that are 30 feet long and 1.5 mm thick. It can be applied in multiple layers to achieve desired thickness.

Series 971 | Aerolon Acrylic

• Uses Insulating
• For Steel, Masonry & Stucco, Concrete, Other, Ductile Iron, Pipes & Fittings
• Generic Description Fluid-applied acrylic insulation coating
• Finish Matte

An innovative, fluid-applied, thermal insulating coating utilizing aerogel particles that imparts exceptional insulative properties to a variety of substrates. Ideal for insulating pipes, valves, tanks, structural steel, or other substrates where thermal improvement or personnel protection is desired. Part of a durable, corrosion-resistant coating system that bonds to the substrate, greatly reducing the issues associated with corrosion under insulation (CUI) and mitigating thermal bridging by controlling condensation.

Series 1026 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
• Generic Description Acrylic Emulsion
• Finish Matte

A durable, easy-to-use, water-based acrylic coating that offers long-wearing protection to a variety of substrates. Excellent as a topcoat or intermediate-coat on anti-corrosive steel coating systems or when applied to concrete and drywall. Easy to apply by brush, roller, and spray, this product’s low odor and low VOC qualities make it versatile choice on architectural and industrial projects. *Note:* Application methods include “dry-fall” under certain conditions (see application).

Series 1028 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). *Note:* Series 1028's "dry-fall" characteristics help to reduce the potential for overspray problems on buildings and surrounding property.

Series 1029 | Enduratone

• Uses Intermediate Coats, Top and Finish Coats
• For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete, Other
• Generic Description HDP Acrylic Polymer
• Finish Low semi-gloss - *Note:* Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.

Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. May be applied by spray, brush or roller over a variety of solvent and waterborne steel primers. May also be used over many aged coatings. It is mildew resistant and exhibits very good gloss and color stability. Series 1028 can be used for light duty wall surfaces in water treatment and pharmaceutical environments. Application methods include "dry-fall" under certain conditions (See Application). *Note:* Series 1029's "dry-fall" characteristics help reduce the potential for overspray problems on buildings and surrounding property.

Series 1074 | Endura-Shield II

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.

Series 1074U | Endura-Shield II

• Uses Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultra-violet light (UV) absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. NOT FOR IMMERSION SERVICE.

Series 1075 | Endura-Shield II

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.

Series 1075U | Endura-Shield II

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A coating highly resistant to abrasion, wet conditions, corrosive fumes and exterior weathering. High build quality combines with project specific primers for two-coat, labor saving systems. Contains a blend of ultraviolet (UV) light absorbers for enhanced color and gloss retention. Fast curing options are available; see Curing Time below. Product has some applications as a direct to metal finish. Contact your Tnemec representative for more details. NOT FOR IMMERSION SERVICE.

Series 1095 | Endura-Shield

• Uses Intermediate Coats, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Aliphatic Acrylic Polyurethane
• Finish Semi-gloss

A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 1096 | Endura-Shield

• Generic Description Aliphatic Acrylic Polyurethane
• Finish Eggshell

A user friendly, low VOC, aliphatic polyurethane coating that provides excellent color and gloss retention for exterior applications to steel, concrete and other substrates in commercial, industrial, and marine environments. Can be applied by brush, roller or spray. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.

Series 1224 | Epoxoline WB

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Inorganic Hybrid Water-Based Epoxy
• Finish Flat

An advanced generation, low odor, low VOC, water-based epoxy coating featuring HydroLink curing technology for exceptional durability and corrosion resistance. Used for the protection and finishing of steel and concrete structures including structural steel, tanks, pipes, and equipment. Superior wetting for marginally prepared steel and tightly adhered existing coatings. This coating is ideally suited for steel fabrication and OEM applications, with fast-curing and rapid-handling properties. Excellent resistance to yellowing and chalking when exposed to UV and an extended recoat window make it a versatile choice. Its high-performance formulation offers excellent adhesion and provides exceptional protection up to 400°F (204°C). Formula protected under U.S. patent. *Note:* This product is a direct replacement for Series 27WB Typoxy.

Series 1254 | EpoxoBlock WB

• Uses Primer and/or Block Fillers
• For Masonry & Stucco, Concrete
• Generic Description Inorganic Hybrid Water-Based Epoxy
• Finish Flat

An advanced generation, low odor, low VOC, high solids, water-based epoxy coating for filling surface voids in porous concrete and masonry block in interior and exterior environments. Provides high bond strength, fast curing, and rapid overcoating capabilities and can be topcoated with a variety of water- and solvent-based coatings.