- All (12)
- Products (10)
-
DOWNLOAD DATA SHEET
Series 264 | Elasto-Shield
- Uses Linings & Secondary Containment
- For Steel, Concrete, Other
- Generic Description Modified Polyurethane
- Finish Gloss. *Note:* Prolonged exterior exposure will cause flattening of the finish.
Flexible liner providing a seamless monolithic membrane for use in potable water basins, steel tank floors and reservoirs. Also for areas requiring impermeability such as decorative ponds and secondary chemical containment.
-
DOWNLOAD DATA SHEET
Series V260 | Tneme-Bond Clear
- For Concrete
- Generic Description Organo Silane
A chemically active, low VOC solution used to assist in the adhesion of Series 262, 264, and 265 coatings to non-porous substrates like metal, glass, plastics, fiberglass, and tile when recoating with itself if maximum cure time has been exceeded.
-
DOWNLOAD DATA SHEET
Series 211-149 & 150
- Generic Description 1.5-ounce chopped strand Fiberglass Mat
Provides fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Increases impact, thermal shock and abrasion resistance for greater durability
-
DOWNLOAD DATA SHEET
Series 211-226 & 227 | Fiberglass Mat
- Generic Description 1.5-ounce chopped strand Fiberglass Mat
Provides fiberglass mat reinforcement to epoxy & vinyl ester lining systems. Increases impact, thermal shock and abrasion resistance for greater durability.
-
Series 218 | MortarClad
- Uses Surfacer, Filler, Patcher
- For Masonry & Stucco, Concrete
- Generic Description Epoxy Modified Cementitious Mortar
- This product has been discontinued. Please refer to Series N218 | MortarClad for a suitable alternative, or contact your local sales representative for further assistance.
A high-performance, aggregate reinforced material for surfacing, patching and filling voids and bugholes in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
-
Series FC20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Fast-curing protective coating for use in steel and concrete structures. Contact your Tnemec representative for other systems and additional information on potential uses.
-
DOWNLOAD DATA SHEET
Series 217 | MortarCrete
- Uses Surfacer, Filler, Patcher
- For Concrete
- Generic Description Calcium Sulfoaluminate Cementitious Repair Mortar and Concrete
A single-component, ultra rapid setting, hydraulic cementitious resurfacer used to restore deteriorated concrete surfaces or extended with aggregate to make high-strength concrete.
-
Series 20 | Pota-Pox
- Uses Primer and/or Block Fillers, Original Equipment Manufacturer (OEM), Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamide Epoxy
- This product has been discontinued. Please contact your local sales representative for further assistance.
Industry standard for potable water epoxy coatings for nearly 40 years. Known for its forgiving application characteristics in adverse and varied conditions, and for its benchmark performance.
-
DOWNLOAD DATA SHEET
Series N140 | Pota-Pox Plus
- Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
- For Steel, Concrete, Other, Ductile Iron, Pipes & Fittings
- Generic Description Polyamidoamine Epoxy
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
-
DOWNLOAD DATA SHEET
Series 215 | Surfacing Epoxy
- Uses Intermediate Coats, Surfacer, Filler, Patcher, Primer and/or Block Fillers
- For DryWall and Gypsum, Steel, Masonry & Stucco, Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Semi-Gloss
An advanced generation, 100% solids epoxy filler and surfacer for concrete or steel. Excellent material for surfacing, patching, and filling voids in pitted steel and bug holes and pits in concrete substrates. Generally topcoated with a variety of high-performance epoxies and polyurethanes for use in mild to aggressive exposures.
