- All (27)
- Products (24)
- Tech Docs (1)
-
DOWNLOAD DATA SHEET
Series 233 | Power-Tread LE
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
DOWNLOAD DATA SHEET
Series 230ESD | Static-Shield EP
- Uses Flooring
- For Concrete
- Generic Description Polyamine Epoxy - Electrostatic Dissipative
- Finish Gloss
Commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Formulated using single wall carbon tube technology specifically designed to provide superior electrical conductivity and enhanced mechanical properties. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20-2014. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
-
DOWNLOAD DATA SHEET
Series 249ESD | Static-Shield UR
- Uses Flooring
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane - Electrostatic Dissipative
Extremely hard, chemical-resistant, electrostatic dissipative urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
-
DOWNLOAD DATA SHEET
Series 280FC | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 280 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series N241 | Ultra-Tread MVT
- Generic Description Polyurethane Modified Concrete
Ultra-Tread MVT is a low odor, slurry applied, high performance moisture control base layer designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread MVT is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Note: Series N241 must be broadcast to refusal with aggregate, color quartz or decorative flake within 15 to 20 minutes of application. Color quartz and/or decorative flake systems will require an additional broadcast layer using non-pigmented Series N222, N224, 237, 238, 256, 257 or 286 to obtain a uniform appearance and texture before applying the desired clear finish coats. This will typically result in a total system thickness of approximately 1/8".
-
Series 245 | Ultra-Tread S
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Polyurethane Modified Concrete
- Finish Matte
- This product has been discontinued. Please contact your local sales representative for further assistance.
Ultra-Tread S is a low odor, slurry applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Ultra-Tread S is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170).
-
DOWNLOAD DATA SHEET
Series N242 | Ultra-Tread S
- Generic Description Polyurethane Modified Concrete
- Finish Matte/Flat
Series N242 is a low-odor, slurry-applied, flowable mortar floor topping designed for monolithic applications in abusive service areas. It provides superior performance to other flooring systems such as acid brick, quarry tile, and most polymer flooring systems. Designed for use in food and beverage facilities, pharmaceutical and processing areas, commercial and restaurant kitchens, or anywhere a durable floor topping is required. Provides excellent chemical resistance and withstands thermal shock due to hot liquids and aggressive cleaning procedures. Areas may be quickly returned to service within hours of installation, depending on temperature and humidity. Series N242 is a self-priming base coat that can be applied to 10-day-old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Series N242 replaces Series 245.
-
DOWNLOAD DATA SHEET
Series V290 | CRU
- Uses Flooring, Top and Finish Coats
- For Steel, Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Semi-Gloss
Extremely hard, chemical-resistant urethane coating with excellent abrasion resistance, wash-down conditions, corrosive fumes, and chemical contact.
-
DOWNLOAD DATA SHEET
Series 256 | ExcellaThane
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
