Carlsbad Desalination Plant

Located 35-miles north of San Diego, California, the Claude “Bud” Lewis Carlsbad Desalination Plant represents a “sea change” in technology that turns saltwater into freshwater using infrastructure protected by advanced coating and lining systems from Tnemec.

“The Carlsbad plant is the largest desalination plant in the Western Hemisphere,” explained Denis Amyot of TPC Consultants, Inc. “The plant’s painting schedule included concrete channels, tanks, secondary containment, and basins, as well as structural steel and piping.”

The project’s concrete channels received one or two coats of Series 22 Epoxoline, a 100 percent solids polyamine epoxy, which was also used for interior sections of piping exposed to continuous temperatures up to 250 degrees. Concrete channels for drinking water received a primer coat of Series V140 Pota-Pox Plus, a polyamidoamine epoxy, and a topcoat of Series 406 Elasto-Shield, a fast-setting polyurethane lining.

“All of the project’s coating systems met San Diego Air Pollution Control District limits for volatile organic compounds (VOCs), which is 250 grams per liter or less,” Amyot observed. “Coating systems for drinking water environments also complied with NSF/ ANSI Standard 61 requirements for materials that come in contact with potable water.”

Concrete for secondary containment was primed with Series 201 Epoxoprime, a moisture-tolerant epoxy, followed by a basecoat of Series 239SC ChemBloc, a novolac polyamine epoxy. While the basecoat was still wet, Series 211-215 Fiberglass Mat was laid into the surface and saturated with Series 239SC until the mat was wet out and translucent. Two coats of Series 282 Tneme-Glaze, a novolac epoxy glaze, and a finish coat of Series 290 CRU, were then applied. A similar secondary containment system for fluorosilicic acid used Series 252SC ChemBloc, a mat-reinforced novolac vinyl ester mortar system.

Interior and exterior structural steel, pipes and valves were primed with Series V69 Hi-Build Epoxoline II, an advanced generation polyamidoamine epoxy, which was also used as a topcoat on interior structural steel and piping. Exterior structural steel, pipes and valves were topcoated with Series 1075 and 1095 Endura-Shield, an aliphatic acrylic polyurethane coating.

Non-submerged, exterior polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC) piping were primed with Series 115 Uni-Bond DF, a hydrophobic acrylic, followed by two finish coats of Series 1029 Enduratone, a low-VOC, High Dispersion Pure (HDP) acrylic polymer.

The $1 billion Carlsbad plant uses a seawater reverse osmosis (SWRO) technology to produce approximately 50 million gallons of drinking water daily for San Diego County, regardless of weather conditions.

    Project Information

    Carisbad, California

    December 2015

    Poseidon Water

    Parada Painting Poway, California

    Arcadis San Diego, California

    Printer Friendly Version


    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Chemical Resistance

    Find the Right Chemical-Resistant Coating

    Look up Tnemec products by their chemical resistance, or vice versa.

    Continue Exploring in the color tool


    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool