Series V295
Clear CRU
Generic Type
Aliphatic Polyester Urethane
Common Usage
Extremely hard, chemical-resistant clear urethane floor coating used as a finish coat for a variety of floor coating systems. It has excellent resistance to abrasion, wet conditions, corrosive fumes, and chemical contact. Gloss among the best of air dried finishes. Typically used over epoxy flooring systems for increased abrasion and chemical resistance. Contains a blend of ultraviolet (UV) light absorbers for enhanced gloss retention and resistance to UV degradation.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Theoretical Coverage
994 mil sq ft/gal (24.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Intermediate
Series 210, N222, N222FC, N223, N224, 280, 281, N284, N285, 288, 289. Note: Scarification using a power sander and 100 grit sandpaper, No. 60 mesh sanding screen or a coarse stripping pad is required if topcoating Series V295 with itself. Note: When applying Series V295 over a broadcast or mortar system, an epoxy grout coat is required.
HAPS
0.16 lb/gallon solid
Finish
Gloss
Volume Solids
62 ± 2.0% (mixed)
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat.
Volatile Organic Compounds
2.06 lbs/gallon (246 grams/litre)
Curing Time
| Temperature | Minimum Recoat | To Service | Chemical Resistance |
|---|---|---|---|
| 75°F (24°C) | 12 hours | 24 hours | 7 days |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Number of Components
Two: Part A and Part B
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep