Series 72
Endura-Shield
Generic Type
Aliphatic Acrylic Polyurethane
Common Usage
A durable topcoat for commercial, industrial, and marine applications that is highly resistant to abrasion, wet conditions, corrosive fumes, chemical contact and has excellent resistance to exterior weathering. Direct-to-Metal capability allows for a labor-saving, high-build, single coat application.
View more product detailsProduct Data Sheets
- English_Series_72_Endura_Shield_pds.pdf
- French_Series_72_Endura_Shield_pds.pdf
- Spanish_Series_72_Endura_Shield_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
-
This product is available in 503 colors.
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
HAPS
Unthinned: 0.16 lbs/gal solids
Thinned 10% (Max) (No. 39 Thinner): 0.16 lbs/gal solids
Thinned 10% (Max) (No. 49 Thinner): 0.16 lbs/gal solids
Finish
Gloss
Theoretical Coverage
978 mil sq ft/gal (24.0 m²/L at 25 microns) †
Volatile Organic Compounds
Unthinned: 1.95 lbs/gallon (234 grams/litre)
Thinned 10% (Max) (No. 39 Thinner): 2.40 lbs/gallon (288 grams/litre)
Thinned 10% (Max) (No. 49 Thinner): 1.95 lbs/gallon (234 grams/litre) †
Topcoats
Series 700, V700, 701, V701, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075U, 1077, 1078, 1078V, optional when extended weatherability is desired.
Primers
Steel: Series 1, 20, 27, 27WB, 37H, 66, L69, L69F, N69, N69F, V69, V69F, 90-97, 91-H²O, 94-H²O, 135, L140, L140F, N140, N140F, V140, V140F, 161, 394, V530
Note: Series V530 exterior exposed more than 24 hours, Series 135 exterior exposed more than two months, or Series N69 or N140 exterior exposed more than three months must first be scarified or reprimed with themselves. Brush blasting with fine abrasive is the preferred method of scarification. Recoat windows for other primers may apply. See those data sheets for additional information.
Number of Components
Two: Part A and Part B
Recommended DFT
Topcoat Service: 2.0 to 5.0 mils (50 to 125 microns) per coat.
Direct to Metal; Over Zinc or MIO-Zinc: 3.5 to 5.0 mils (90 to 125 microns).
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. For DTM or applications over zinc or MIO-zinc, as part of a two-coat system, consult the latest version of Tnemec Technical Bulletin 13-100 or contact your Tnemec representative.
Curing Time
| Temperature | To Touch | To Handle | To Recoat |
|---|---|---|---|
| 75°F (24°C) | 1 hour | 5-8 hours | 12 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness. Note: For faster curing and low-temperature applications, add No. 44-710 Urethane Accelerator.
Volume Solids
61.0 ± 2.0% (mixed) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep