Series 665

Dur A Pell 100

This product has been discontinued. Please refer to Series 662 | Prime-A-Pell Plus for a suitable alternative, or contact your Tnemec Sales Representative

Generic Type

Silane

Common Usage

Dur A Pell 100 is a clear, filmless, penetrating water repellent for virtually all above-grade, vertical and horizontal concrete, stucco, natural stone, block and brick masonry. Concrete, stone and masonry treated with Dur A Pell 100 resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and weather deterioration.

Colors

Dur A Pell 100 is a clear liquid when applied but dries clear, leaving the aesthetic appearance of the substrate unchanged.

Curing Time

Dur A Pell 100's volatility increases with temperature, therefore more material will evaporate from the treated surface prior to curing when temperatures exceed 80°F (27°C). Protect treated surfaces from pedestrian and vehicular traffic for at least 8 hours, from rain and lawn sprinklers for 6 to 8 hours. (Time to resist moisture is increased at lower temperatures.) Allow 7 days before evaluating performance.

Volatile Organic Compounds

2.9 lbs/gallon (344 grams/litre)

Topcoats

If color is desired, apply Series 607 Conformal Stain.

Continue Exploring in the color tool

Close

Color Swatch packet

You can use our Color Tool page to explore our available colors and request swatches of colors you like.

Sorry, there is a maximum of 6 color swatches.

Request swatch packet

Continue Exploring in the color tool

Close