Series 1028T
Enduratone
Generic Type
HDP Acrylic Polymer
Common Usage
Water-based, low VOC, High Dispersion Pure acrylic polymer coating providing excellent long term protection in both interior/exterior exposures. Contains ceramic spheres for enhanced thermal stability. May be applied by spray, brush or roller over Aerolon insulative coating systems. It is mildew resistant and exhibits very good gloss and color stability.
View more product detailsContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Volume Solids
46.0 ± 2.0% †
Curing Time
| Temperature | To Touch | To Handle | To Recoat | To Resist Moisture |
|---|---|---|---|---|
| 75°F (24°C) | 30 minutes | 2 hours | 2 hours | 6 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Theoretical Coverage
738 mil sq ft/gal (18.1 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components
One
Intermediate
Series 971
Finish
Gloss - Note: Final gloss level of topcoat can vary depending on number of coats applied. One coat will generally result in a lower sheen than two coats of the material.
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns) per coat. Important: Do not exceed 3 mils DFT when topcoating Aerolon for personnel protection.
HAPS
Unthinned: 0.27 lbs/gal solids
Thinned 5%: 0.27 lbs/gal solids
Volatile Organic Compounds
Unthinned: 0.61 lbs/gallon (73 grams/litre)
Thinned 5%: 0.61 lbs/gallon (73 grams/litre) †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep