- All (37)
- Products (27)
- Projects (4)
- Tech Docs (1)
-
DOWNLOAD DATA SHEET
Series 248 | EverThane
- Uses Flooring, Top and Finish Coats
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane
- Finish Semi-gloss. *Note:* The gloss level can be reduced by adding two Part C filler components to each kit.
Extremely hard, chemical-resistant urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Excellent gloss and color retention. Low odor characteristic allows for use near occupied space.
-
DOWNLOAD DATA SHEET
Series 233 | Power-Tread LE
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A lower viscosity, high-solids, multi-purpose epoxy that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, metallic color coat and topcoat. Especially useful when penetration is needed to sufficiently anchor epoxy flooring systems over lightly profiled concrete surfaces. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
-
Series 238 | Power-Tread FC
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- For Concrete
- Generic Description Modified Polyamine Fast-Cure Epoxy
- This product has been discontinued. Please refer to Series N222FC | Deco-Tread FC for a suitable alternative, or contact your local sales representative for further assistance.
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and mild chemicals.
-
DOWNLOAD DATA SHEET
Series N224 | Deco-Fleck
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Decorative Flake-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative flake—multi-colored appearance, available in 1/16", 1/8" and 1/4" sizes. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N224 is a customized decorative floor topping utilizing colored flake, broadcast either at random or refusal. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
Tennessee State Maintenance Hangar
- Industries Architectural
A complete high-performance system from Tnemec was installed to protect the floor of the Tennessee state hangar. The hangar is used for maintenance of state-owned planes and features a topcoat of Seri
-
DOWNLOAD DATA SHEET
Series 257 | ExcellaThane SS
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
A slower setting Polyaspartic floor coating, offering longer working time and lower viscosity. Series 257 minimizes the potential for lap marks and roller lines when used in large flooring applications. It can be used as a two coat thin-film system or as a clear or pigmented finish coat over systems built using epoxy or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 257 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
-
DOWNLOAD DATA SHEET
Series 256 | ExcellaThane
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
-
DOWNLOAD DATA SHEET
Series N283 | Coving Resin
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
A clear, thixotropic binder resin. Series N283 is designed to be used in all phases of cove building or vertical trowel applications (priming, base coat, and topcoat) and it can also be used for concrete repair. Note: When using Series N283 for building cove or troweled wall applications an aggregate similar to 30/50 mesh silica sand, Series 222 or 223 Quartz must be used. Has excellent adhesion, good chemical resistance, repairs concrete, and can be applied up to 1/4” without sagging.
-
DOWNLOAD DATA SHEET
Series N223 | Deco-Trowel
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For Concrete
- Generic Description Colored Quartz-Filled Modified Polyamine Epoxy
- Finish Gloss. Decorative quartz—multi-colored appearance. The finished appearance and texture depend on the type, film thickness, and the number of clear finish coats selected.
A low ambering, multi-purpose epoxy coating with enhanced UV stability and resistance to yellowing. Series N223 is a decorative mortar floor-topping system installed at 3/16” to 1/4” thickness. It protects concrete surfaces from impact and abrasion and has excellent chemical resistance with an aesthetically pleasing appearance.
-
Series 237 | Power-Tread
- Uses Intermediate Coats, Primer and/or Block Fillers, Flooring
- Generic Description Modified Polyamine Epoxy
- Finish Gloss
- This product has been discontinued. Please refer to Series N222 | Deco-Tread for a suitable alternative, or contact your local sales representative for further assistance.
A multi-purpose epoxy coating that can be used as a primer, broadcast, slurry/broadcast, mortar, grout coat, and topcoat. Excellent application properties with good flow and self-leveling characteristics. Protects concrete surfaces from impact, abrasion and has very good chemical resistance.
