- All (30)
- Products (22)
- Projects (2)
- Tech Docs (1)
-
DOWNLOAD DATA SHEET
Series N241 | Ultra-Tread MVT
- Uses FDA
- For Concrete
- Generic Description Polyurethane Modified Concrete
Ultra-Tread MVT is a low odor, slurry applied, high performance moisture control base layer designed to reduce moisture vapor emissions prior to the application of non-breathing, polymer floor topping finishes. Ultra-Tread MVT is a self-priming base coat that can be applied to 10 day old concrete. It can withstand moisture vapor transmission up to 20 lbs (per ASTM F 1869) and relative humidity up to 99% (per ASTM F 2170). Note: Series N241 must be broadcast to refusal with aggregate, color quartz, or decorative flake within 15 to 20 minutes of application. Color quartz and/or decorative flake systems will require an additional broadcast layer using non-pigmented Series N222, N222FC, N224, 256, 257, or 286 to obtain a uniform appearance and texture before applying the desired clear finish coats. This will typically result in a total system thickness of approximately 1/8". Series N241 may also be used as a primer for Series N242 systems. Series N241 must be broadcast to refusal and allowed to cure a minimum of 6 hours prior to applying the N242 mortar.
-
DOWNLOAD DATA SHEET
Series 256 | ExcellaThane
- Uses Intermediate Coats, Top and Finish Coats
- For Concrete
- Generic Description Modified Aliphatic Polyaspartic
- Finish Gloss. The texture of the finished surface will depend on the film thickness and number of coats applied. *Note:* Application as a clear topcoat may lead to a cloudy appearance if the product is overworked, applied too thick, or applied too far into its pot life. This product has a short working time. Caution should be taken to apply the material immediately after mixing and to not overwork the product when rolling.
An extremely fast-curing, multi-purpose and finish coat resin with low temperature cure capability. Used to build aggregate, colored quartz or decorative flake filled floor topping systems. It can also be used as a clear or pigmented finish coat over systems built using Series 256 or systems built using epoxy, or polyurethane modified concrete floor toppings that have been fully broadcast with aggregate, colored quartz or colored flake. Series 256 will provide protection against impact, abrasion and mild chemicals, has excellent gloss and color retention, and resistance to yellowing. This low VOC, 100% solids urethane exhibits low odor characteristics allowing for use near occupied spaces.
-
DOWNLOAD DATA SHEET
Series 1079 | Metallic Clearcoat
- Uses Top and Finish Coats
- For Steel
- Generic Description Aliphatic Acrylic Polyurethane
- Finish High gloss
A unique clear coat used to both enhance the finish and extend the long-term weathering qualities of metallic pigmented coatings. Resists most graffiti markings. Series 44-500 (patent 5,548,010 and other patents pending), an optional indicator dye, is available to aid in uniform application. Where VOC regulations apply, this product can only be sold or used as part of a faux finishing coating system.
-
DOWNLOAD DATA SHEET
Series 230ESD | Static-Shield EP
- Uses Flooring
- For Concrete
- Generic Description Polyamine Epoxy - Electrostatic Dissipative
- Finish Gloss
A highly durable, epoxy floor topping commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Formulated using single wall carbon tube technology specifically designed to provide superior electrical conductivity and enhanced mechanical properties. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20-2014. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
-
DOWNLOAD DATA SHEET
Series 249ESD | Static-Shield UR
- Uses Flooring
- For Concrete
- Generic Description Aliphatic Moisture Cured Urethane - Electrostatic Dissipative
Extremely hard, chemical-resistant, electrostatic dissipative urethane floor coating with superb wear characteristics. Excellent resistance to abrasion, wet conditions, corrosive fumes and chemical contact. Commonly used in facilities that manufacture, process, assemble, package, service, inspect or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges which have established, implemented and maintain an Electrostatic Discharge (ESD) Control Program. Also used in data centers, clean room/labs, computer rooms, military/aerospace, avionics, automotive manufacturing or any environments where electrostatic discharge (ESD) is a nuisance or may have damaging effects. Ensures permanent and uniform electrical conductivity eliminating “hot spots". Designed for static dissipative resistance in the range of 1x10^6^ to 1x10^9^ (one million to one billion) ohms surface resistance when testing point to point/point to ground for establishing floor resistance values per ANSI/ESD S20.20. Project specifications and application specifics should clearly indicate what resistance range is required. Note: Not intended for industries requiring protection against explosion hazards such as dust, fuels, and solvents or electrically initiated explosive compounds and devices.
-
DOWNLOAD DATA SHEET
Series V290 | CRU
- Uses Flooring, Top and Finish Coats
- For Steel, Concrete
- Generic Description Aliphatic Polyester Polyurethane
- Finish Semi-Gloss
Extremely hard, chemical-resistant urethane coating with excellent abrasion resistance, wash-down conditions, corrosive fumes, and chemical contact.
-
Smuttynose Brewery Floors
- Industries Processing & Manufacturing
Two years after installation, the Ultra-Tread coating systems in Smuttynose’s brewery continue to protect the concrete floors and provide aesthetic appeal to the owners and visitors alike.
-
DOWNLOAD DATA SHEET
Series 280FC | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A fast-cure glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 280 | Tneme-Glaze
- Uses Intermediate Coats, Flooring, Top and Finish Coats
- For DryWall and Gypsum, Masonry & Stucco, Concrete, Other
- Generic Description Modified Polyamine Epoxy
- Finish Gloss. (Roller application provides an orange peel finish.)
A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
-
DOWNLOAD DATA SHEET
Series 44-714 Ultra-Tread Accelerator
- Generic Description Accelerator
Series 44-714 Ultra-Tread Accelerator is a special additive used to decrease the cure time of Tnemec Company's four-component Ultra-Tread products when a faster return to service is needed. Series 44-714 has virtually no VOC or odor. It may be used with Series N241 Ultra-Tread MVT, N242 Ultra-Tread S, Series N244 Ultra-Tread M, or Series N246 Ultra-Tread Glaze.
