Series 37H | Chem-Prime H.S.

• Uses Primer and/or Block Fillers
• For Steel, Other, Ductile Iron, Pipes & Fittings
• Generic Description Phenolic Alkyd

Lead- and chromate-free, fast-drying, corrosion-resistant primer that accepts a variety of high-performance topcoats. Ideally suited for steel fabricators, OEM’s and field applications. Note: Not recommended for immersion.

Junction Bridge

• Industries Architectural

The steel handrails and stair casings on the Junction Bridge in Little Rock, AR received a topcoat of Series 1074U Endura-Shield II because of the coating’s added UV protection.

Series 104 | H.S. Epoxy

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete
• Generic Description Cycloaliphatic Amine Epoxy
• Finish Semi-gloss. Gloss can vary with texture, porosity of substrate and thickness of film.

Versatile coating applies up to 10 mils per coat on steel or concrete. Protects in immersion, salt spray and chemical exposures. Superior abrasion- and stain-resistance.

Series 135 | Chembuild

• Uses Primer and/or Block Fillers
• For Steel, Other
• Generic Description Modified Polyamidoamine Epoxy
• Finish Semi-gloss

High-build coating with superior wetting for marginally prepared rusty steel and tightly adhering old coatings. Excellent abrasion-, chemical- and corrosion-resistance. Perfect foundation for aliphatic-polyurethanes. NOT FOR IMMERSION SERVICE.

Mitchellville 300,000 Gallon Water Tank

• Industries Water Storage Tanks

A coating system featuring Series 1074U and Series FC20 was used on the Mitchellville water tank in Iowa because of the high-build properties and labor cost savings.

Series 66HS | Hi-Build Epoxoline

• Uses Intermediate Coats, Primer and/or Block Fillers, Top and Finish Coats
• For Steel, Masonry & Stucco, Concrete, Other
• Generic Description Polyamide Epoxy
• Finish Satin

• Product is made to order for specific projects. Contact your Tnemec Representative for additional information.

A high-solids, low VOC, pure polyamide epoxy that offers exceptional protection to a variety of substrates in atmospheric and immersion environments. Applied as a primer, intermediate, or topcoat, this versatile coating also accepts a wide-range of finish coats, allowing for a coating system tailored to specific exposure conditions.

Series 132 | ProTuff Mastic

• Uses Primer and/or Block Fillers
• For Steel
• Generic Description Phenalkamine Epoxy Mastic
• Finish Semi-gloss

Series 132 is a versatile, high-build, surface tolerant epoxy designed for application over tightly adhered light corrosion and marginally prepared or previously coated steel, or as a primer/intermediate coat under weather-able finishes. Series 132 may be applied at low-temperatures, over dew point conditions and on damp surfaces. Suitable for use on structures subjected to corrosive, damp, or immersion environments including coastal and marine structures such as tanks, boat hulls, voids, machinery spaces, bilges, and other wet areas. Good for maintenance and new construction applications.

Colonial Terminals Fuel Storage Tanks

• Industries Industrial

Series 1074 Endura-Shield II protects the steel tanks against abrasion, wet conditions, corrosive fumes and exterior weathering.

Wahoo Water Tank

• Industries Water Storage Tanks

The recoating project for the Wahoo, NE water tank included a top coat of Series 1074U Endura-Shield II to protect it from exterior weathering.

Fairborn, OH Water Tanks

• Industries Water Storage Tanks