Elevated Water Storage Tank

Project engineers typically determine the specifications for all facets of a construction process. When the City of West Des Moines, Iowa, decided to construct an additional water storage tank, however, West Des Moines Water Works had a specific request for the project engineers: ensure a Tnemec coating system is used on the tank’s exterior.

The City of West Des Moines was growing, and growing fast. Apartment complexes, office parks and strip malls were beginning to close in on the area where the existing water tanks were located. These growth concerns dictated the decision for the new hydropillar construction, as well as the request for the Tnemec coating system.

“The City of West Des Moines knew that in a couple of years, there could be expansion that extended very close to the tanks,” recalled Tnemec coating consultant Kevin Greteman. “They wanted a coating system that could ensure durability and provide the longevity that was needed.”

Construction on the 2.5 million gallon tank began in early fall 2004. Series 91-H2O Hydro-Zinc, a moisture-cured, zinc-rich urethane primer, was selected for the more than 150,000-square-foot total surface area because it could be utilized on both the interior and exterior of the tank’s steel plates. This expedited the application process and eliminated the need for two different primers.

With the Hydro-Zinc primer in place on the exterior, Series 73 Endura-Shield, an aliphatic acrylic polyurethane, was roller-applied as an intermediate on the exterior. The finish coat selected was Series 700 HydroFlon, a fluorourethane coating designed especially for tanks and other exposed steel structures, applied at 2.0 to 3.0 mils DFT.

For the tank’s interior lining, a three-coat system was airless spray-applied to the wet and dry areas. A combination of Series 20 Pota-Pox, a polyamide epoxy and Series FC20 Pota-Pox, a fast-curing polyamide epoxy, was used to accommodate the anticipated temperature fluctuations during the interior coating application.

“The performance capabilities of the coating system worked perfectly with West Des Moines’ needs,” noted Greteman. “They remain very pleased with the project.”

    Project Information

    West Des Moines

    April 2005

    City of West Des Moines, Iowa

    CB&I of Plainfield, Illinois

    CB&I, Plainfield, IL

    Krishna Engineering Consultants, Inc. of West Des Moines, Iowa

    Printer Friendly Version


    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    Color Requests

    Searching for the Right Color?

    Use our color tool or request more tools from your local representative.


    Create your Own Tank Design

    Use Tnemec's interactive water tank design program, Tank 3D.

    Continue Exploring in the color tool


    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool