Darien Standpipe

Visitors to Darien, Illinois, probably wonder what a lighthouse is doing so far from the ocean when they first set eyes on the city’s award-winning 1.5 million gallon standpipe with its multi-colored, fluoropolymer coating system from Tnemec. “The new standpipe was designed, built and coated to resemble a lighthouse,” reported Tnemec coating consultant Erik Otten. “It’s an impressive structure with its conical roof, five pilasters, two balconies and ten (10) three-dimensional, simulated windows.”

The tank was fabricated by CB&I Constructors, Inc., where the exterior steel plates were prepared in accordance with SSPC-SP6/NACE No. 3 Commercial Blast Cleaning and primed with Series 94-H2O Hydro-Zinc, a moisture-cured, zincrich urethane. The interior steel was prepared in accordance with SSPC-SP10/ NACE No. 2 Near-White Metal Blast Cleaning and a prime coat of Series 94-H2O was spray-applied.

After the tank was erected, the exterior steel was spot-primed with Series 91-H2O Hydro-Zinc, a moisture-cured zinc-rich aromatic urethane primer, followed by an intermediate coat of Series 73 Endura-Shield, an acrylic polyurethane that is highly resistant to abrasion, wet conditions and weathering. The finish coat was Series 700 HydroFlon, an advanced thermoset fluoropolymer with outstanding ultraviolet (UV) light resistance and excellent color and gloss retention. “Four different colors of HydroFlon were used on the exterior,” according to Otten. “One color was used to accent the pilasters, balconies and window frames, another for the roof, a third for the windows and a fourth for the base color of the tank.”

HydroFlon is becoming the finish coat of choice for new water storage tanks in Otten’s service area. “HydroFlon was first specified as a finish coat in this area back in 2003,” Otten recalled. “Today, everyone seems to be specifying it based on its performance over the past six years. People are especially happy with its gloss and color retention.”

Field coating of the tank’s interior steel involved spot-priming with Series 91-H2O, followed by two coats of Series 20 Pota-Pox, a polyamide epoxy that is the industry standard for potable water epoxy coatings.

In 2007, the Steel Tank Institute/Steel Plate Fabricators Association (STI/SPFA) selected the Darien “lighthouse” as its Tank of the Year in the Standpipe Category. The award was presented to the tank’s fabricator, CB&I Constructors, Inc. The Darien standpipe was also featured in Tnemec’s 2009 Water Tank Calendar and CoatingsPro™ magazine.

    Project Information

    Darien, IL

    October 2007

    City of Darien, Illinois

    Christopher Burke Engineering Rosemont, Illinois

    Shop Applicator
    CB&I Constructors, Inc., Houston, IL

    Field Applicator
    CB&I Water, Plainfield, IL

    Printer Friendly Version

    Darien Standpipe

    Contact Your Rep

    Looking for Some Local Coatings Guidance?

    Reach out to one of our knowledgable and reliable representatives near you.

    How to Purchase

    Ready to Order Tnemec?

    We're ready to help. Click below to learn more about our purchasing process.

    Sustainable Building

    Need Coatings for LEED Projects?

    Tnemec offers a long list of low VOC coatings built to protect sustainable structures.

    Continue Exploring in the color tool


    Color Swatch packet

    When you finish selecting, request your Swatch Packet below. Expect your swatch cards in 5-7 business days. Contact your expert Sales Rep at any time.

    Sorry, there is a maximum of 6 color swatches.

    Request swatch packet

    Continue Exploring in the color tool