Series N140
Pota-Pox Plus
Generic Type
Polyamidoamine Epoxy
Common Usage
Innovative potable water coating which offers high-build edge protection and allows for application at a wide range of temperatures (down to 35°F or 2°C with 44-700 Accelerator). For use on the interior and exterior of steel or concrete tanks, reservoirs, pipes, valves, pumps, and equipment in potable water service.
Special Qualifications
Certified by NSF International in accordance with NSF/ANSI/CAN Std. 61 and the extraction requirements of NSF/ANSI/CAN 600. Note: Series N140 is an NSF-approved primer, stripe coat, and intermediate coat for applications on the interior of steel tanks; Series N140 is an NSF-approved primer and finish coat for applications on pumps, valves, fittings, and mechanical devices. Reference Tnemec’s certified product listing at www.nsf.org for additional details.
Conforms to AWWA C210 (without 44-700). Contact your Tnemec representative for systems and additional information.
A two-coat and three-coat system of Series N140 meets the requirements of AWWA C550 Protective Interior Coatings for Valves and Hydrants.
View more product detailsProduct Data Sheets
- English_Series_N140_Pota_Pox_Plus_pds.pdf
- French_Series_N140_Pota_Pox_Plus_pds.pdf
- Spanish_Series_N140_Pota_Pox_Plus_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
Colors
View Available Colors
View available colors in our Color Tool; you can also select and request color swatches.
HAPS
Unthinned: 2.4 lbs/gal solids
Thinned 5% (No. 60 Thinner): 2.4 lbs/gal solids
Thinned 10% (No. 4 Thinner): 3.3 lbs/gal solids
Topcoats
Interior: Series 21, 22, FC22, L140, L140F, N140, N140F, 264, 265, 406.
Exterior: Series 22, 27, 66, L69, L69F, N69, N69F, V69, V69F, 73, 118, L140, L140F, N140, N140F, 156, 157, 161, 180, 181, 700, V700, 701, V701, 1026, 1028, 1029, 1077, 1078, 1078V, 1080, 1081, 1094, 1095, 1096, 1224. Note: When topcoating with Series 700, V700, 701, or V701, an intermediate coat of Series 73, 1095 or 1096 is required. Note: The following recoat times apply for Series N140: Immersion Service—Surface must be scarified by blasting with fine abrasive after 60 days. Atmospheric Service—After 60 days, scarification or an epoxy tie-coat is required. Note: When topcoating with Series 406, recoat times will vary with temperature. Reference the Series 406 product data sheet for specific recoat times. Contact your Tnemec representative for specific recommendations.
Recommended DFT
2.0 to 10.0 mils (50 to 225 microns) per coat. Note: Reference the NSF website at www.nsf.org for details on the maximum allowable DFT. Note: The number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Volatile Organic Compounds
Unthinned: 2.4 lbs/gallon (285 grams/litre)
Thinned 5% (No. 60 Thinner): 2.6 lbs/gallon (311 grams/litre)
Thinned 10% (No. 4 Thinner): 2.8 lbs/gallon (334 grams/litre) †
Number of Components
Two: Part A (amine) and Part B (epoxy) — One (Part A) to one (Part B) by volume.
Volume Solids
67.0 ± 2.0% (mixed—A, B & 44-700 Epoxy Accelerator) †
Theoretical Coverage
1,070 mil sq ft/gal (27.2 m²/L at 25 microns). See APPLICATION for coverage rates. †
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep