Series 434
Perma-Shield H2S
Generic Type
Modified Aliphatic Amine Epoxy Mortar
Common Usage
A 100% solids, hybrid epoxy mortar designed for severe wastewater immersion and fume environments. Specifically formulated to withstand high levels of hydrogen sulfide gas (H2S), sulfuric acid (H2SO4), as well as other gases common to sewer exposures and severe wastewater environments. Aggregate reinforcement provides additional resistance to abrasion and impact.
View more product detailsProduct Data Sheets
- English_Series_434_Perma_Shield_H2S_pds.pdf
- French_Series_434_Perma_Shield_H2S_pds.pdf
- Spanish_Series_434_Perma_Shield_H2S_pds.pdf
Safety Data Sheets
Email this productContact your sales reps for quotes, problem solving advice, extensive technical knowledge, pricing, ordering and field support.
HAPS
0.06 lbs/gal solids
Curing Time
| Temperature | To Topcoat | To Place in Service | Maximum Recoat |
|---|---|---|---|
| 75°F (24°C) | 8 hours | 2 days | 7 days |
| 55°F (13°C) | 12 hours | 3 days | 7 days |
Note: Curing time will vary with surface temperature, air movement, humidity and film thickness. Note: If more than 7 days have elapsed between coats, the Series 434 coated surface must be mechanically abraded before topcoating.
Volume Solids
100% (mixed)
Primers
Concrete: Self-priming or Series 61, N69, N69F, 201. Note: Series 201 must be scarified after 24 hours before topcoating with Series 434. Note: Series 61, N69 or N69F must be scarified after 7 days before topcoating with Series 434. Note: Series 61 is recommended for use in mesophilic anaerobic digesters and other severe exposures. Contact your Tnemec representatives for more information.
Topcoats
Series 435
Theoretical Coverage
1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Volatile Organic Compounds
EPA Method 24: 0.15 lbs/gallon (18 grams/litre)
Number of Components
Three: Part A (Amine), Part B (Epoxy) and Part C (Aggregate)
Recommended DFT
1/8 inch or 125 mils (3,125 microns) minimum.
Still have questions? Request the information you’re looking for:
Request InfoHow to Purchase
Tnemec coatings are sold through a select network of local independent sales representatives who can help you find the best product for your needs. Find a rep