Series 161HS
Tneme-Fascure
This product has been discontinued. Please contact your local sales representative for further assistance.
Generic Type
Polyamide Epoxy
Common Usage
A high-solids, low VOC, pure polyamide epoxy offering excellent protection to a wide range of substrates in atmospheric and immersion environments. Its fast-cure characteristics are ideal for shop or low temperature application. Versatile use as a primer, intermediate, or topcoat it is complimented by a variety of finish coat options.
Primers
Steel: Self-priming or Series 1, 20HS, FC20HS, 27, 27WB, 66HS, 90-97, 90-98, 90E-92, 90G-1K97, 91-H2O, 94-H2O, 135, 394, V530
Concrete: Self-priming, 20HS, FC20HS, 66HS
CMU: 130, 1254
Surfacer/Filler/Patcher
215, 217, 218
Number of Components
Two: Part A (epoxy) and Part B (polyamide)
Volatile Organic Compounds
Unthinned: 1.53 lbs/gal (184 grams/litre)
Thinned 10% (No. 4 Thinner): 2.02 lbs/gallon (242 grams/litre)
Thinned 20% (No. 4 Thinner): 2.43 lbs/gallon (291 grams/litre) †
Colors
Refer to Tnemec Color Guide. Note: Epoxies chalk with extended exposure to sunlight and may yellow on aging. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may accelerate any potential yellowing. Note: Special color bases are recommended for immersion service. Contact your Tnemec representative for more information.
Curing Time
| Temperature | To Touch | To Handle | To Recoat | Immersion† |
|---|---|---|---|---|
| 75°F (24°C) | 1 hour | 6 hours | 7-8 hours | 5 days |
| 65°F (18°C) | 2 hours | 6-8 hours | 8-10 hours | 7 days |
| 55°F (13°C) | 3 hours | 10-12 hours | 14-16 hours | 9 days |
| 45°F (7°C) | 5 hours | 18-20 hours | 22-24 hours | 10 days |
| 35°F (2°C) | 6 hours | 30 hours | 36-40 hours | 16 days |
† For water immersion only. Chemical storage will require additional cure time. Curing time varies with surface temperature, air movement, humidity and film thickness.
Ventilation: When used as a tank lining or in enclosed areas, provide adequate ventilation during application and cure.
Theoretical Coverage
1,248 mil sq ft/gal (30.7 m²/L at 25 microns). See APPLICATION for coverage rates. †
Recommended DFT
2.0 to 10.0 mils (50 to 254 microns) per coat.
Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
HAPS
Unthinned: 1.15 lbs/gal solids
Thinned 10% (No. 4 Thinner): 1.87 lbs/gal solids
Thinned 20% (No. 4 Thinner): 2.58 lbs/gal solids
Topcoats
46H-413, 27WB, 30, 72, 73, 104, 113, 114, 115, 141, 161HS, 262, 265, 290, 291, 740, 750, 1026, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1074U, 1075, 1075U, 1080, 1081, 1095. Refer to COLORS on applicable topcoat data sheets for additional information. Note: When topcoating Series 161HS, the following maximum recoat times apply: with 262 or 265, 7 days; with 740 or 750, 14 days; with 1095, 30 days; with itself, 46H-413, 27WB, 104, 113, 114, 290, 291, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1080 or 1081, 60 days; with 72, 73, 1074, 1074U, 1075 or 1075U, 90 days. Scarify the Series 161HS surface before topcoating if maximum recoat time has elapsed.
Finish
Satin
Volume Solids
78% ± 2.0% (mixed) †