Series 1501
Endura-Heat Primer
This product has been discontinued. Please contact your local sales representative for further assistance.
Generic Type
Silicone Alkyd
Common Usage
A heat-resistant, corrosion-inhibitive, silicone alkyd primer that protects steel in service environments up to 600°F (315°C). Fast, ambient cure allows topcoats to be quickly applied so equipment and structures can be painted and returned to service. Hot application option up to 400°F (204°C).
Colors
Gray. Important: Due to the product's high heat exposure, sheen and color variations may occur. However, these changes are aesthetic only and will not affect performance. Contact your Tnemec representative for more information.
Theoretical Coverage
818 mil sq ft/gal (76 m²/L at 25 microns). See APPLICATION for coverage rates. †
Recommended DFT
2.0 to 3.0 mils (50 to 75 microns). Note: Application of coating below minimum or above maximum recommended dry film thicknesses may adversely affect coating performance.
Curing Time
| Temperature | To Touch | To Handle | To Topcoat | To Place in Service |
|---|---|---|---|---|
| 75°F (24°C) | 2 hours | 3 to 4 hours | 1 hour | 12 hours |
Curing time varies with surface temperature, air movement, humidity and film thickness.
Finish
Flat
Topcoats
Series 1552
Volume Solids
51%
Number of Components
One
Primers
Self-priming
Volatile Organic Compounds
TBAC Exempt:
Unthinned: 2.99 lbs/gallon (358 grams/litre)
Thinned 10% (No. 80 Thinner): 3.37 lbs/gallon (404 grams/litre)
Thinned 10% (No. 81 Thinner): 3.42 lbs/gallon (409 grams/litre)
Thinned 10% (No. 82 Thinner): 3.49 lbs/gallon (419 grams/litre)
Thinned 20% (No. 83 Thinner): 4.09 lbs/gallon (490 grams/litre)
Note: This product is not compliant in air districts that do not allow TBAC exemption.