Series V10 | Tnemec Primers

Generic Type Modified Alkyd
Common Usage Chemically active, rust-inhibitive primer for ferrous metals. This low VOC primer provides extended weathering for shop and field priming of structural and miscellaneous steel. Series 10-99W can also be used as a primer for wood substrates.
Colors 99 Red, 1009 Gray, 99G Green, 99B Black, 99W White. Note: Minimum order quantities apply for 99G Green and 99B Black.
Topcoats Series 2H, 2HS, 6, 30, 82HS, 113, 114, 115, 1028, 1029. Note: Some systems are not for use on surfaces that are continually wet or sweat frequently. Reference the applicable topcoat data sheet for additional information.
Note: Series 10 and V10 must cure three days before topcoating with Series 1028 or 1029.
Volume Solids 57 ± 2.0%
Recommended DFT 2.0 to 3.5 mils (50 to 90 microns) per coat.
Curing Time
Temperature To Handle To Recoat
99, 99B
99G, 1009		75°F (24°C)2-4 hours12 hours
99W75°F (24°C)3-5 hours12 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 2.80 lbs/gallon (335 grams/litre)
Thinned 1%: 2.84 lbs/gallon (340 grams/litre)
HAPS Unthinned: 0 lbs/gal solids
Thinned 1%: 0 lbs/gal solids
Theoretical Coverage 917 mil sq ft/gal (22.5 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components One

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Alkyd
Volume SolidsRec. DFTV.O.C.# of Components
57 ± 2.0%2.0 to 3.5 mils (50 to 90 microns) per coat.Unthinned: 2.80 lbs/gallon (335 grams/litre)
Thinned 1%: 2.84 lbs/gallon (340 grams/litre)		One
Series 10 | Tnemec Primers Modified Alkyd
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
56.0 ± 2.0% †2.0 to 3.5 mils (50 to 90 microns) per coat.Unthinned: 2.98 lbs/gallon (357 grams/litre)
Thinned 10%: 3.30 lbs/gallon (395 grams/litre) †		One
Series 37H | Chem-Prime H.S. Phenolic Alkyd
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
58.0 ± 2.0% †2.0 to 3.5 mils (50 to 90 microns) per coat.Unthinned: 2.91 lbs/gallon (348 grams/litre)
Thinned 4%: 3.07 lbs/gallon (368 grams/litre)
Thinned 9%: 3.27 lbs/gallon (391 grams/litre) †		One
Series 88HS | Azeron H.S. Primer Modified Short Oil Alkyd
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
60.0 ± 2.0% †2.0 to 3.5 mils (50 to 90 microns) per coat.Unthinned: 2.69 lbs/gallon (322 grams/litre)
Thinned 2%: 2.78 lbs/gallon (333 grams/litre) †		One

Email this product

Steel with Series 10 primer in the field