find your coatings consultants
Find and contact a coatings consultant near you.

Series H90-97 | Tneme-Zinc

Generic Type Aromatic Urethane, Zinc-Rich
Common Usage An advanced technology, two-component, moisture-cured, zinc-rich primer providing extraordinary performance. It's user friendly and rapid curing so chemical- and corrosion-resistant topcoats can be applied the "same-day." Also used for field touch-up of inorganic zinc coating. H90-97 is HAPS compliant for use in-shop.
Colors 90-97 Reddish-gray
Topcoats Series 1, 6, 27, 27WB, 46H-413, 66, L69, L69F, N69, N69F, V69, V69F, 73, 104, 113, 114, 115, 135, 161, 394, 1028, 1029, 1074, 1074U, 1075, 1075U
Note: Certain topcoat colors may not provide one-coat hiding depending on method of application. Contact your Tnemec representative. Note: Series H90-97 must be exterior exposed for three days prior to topcoating with Series 1028 or 1029. Note: Series H90-97 must be exterior exposed for one day prior to topcoating with Series 27WB.
Volume Solids 63.0 ± 2.0% (mixed)
Recommended DFT 2.5 to 3.5 mils (65 to 90 microns) per coat.
Curing Time Without 44-710
Temperature †To HandleTo Recoat
75°F (24°C)1 hour4 hours
65°F (18°C)1 1/2 hours5 hours
55°F (13°C)2 hours6 hours
45°F (7°C)2 1/2 hours7 hours
35°F (2°C)3 hours8 hours
† 50% relative humidity. Curing time will vary with surface temperature, humidity and film thickness.
Note: For faster curing, low humidity and low-temperature applications, add No. 44-710 Urethane Accelerator (see separate product data sheet).
Volatile Organic Compounds Unthinned: 2.83 lbs/gallon (339 grams/litre)
Thinned 15%: 2.83 lbs/gallon (339 grams/litre)
HAPS Unthinned: 0.85 lbs/gal solids
Thinned 15%: 0.85 lbs/gal solids
Theoretical Coverage 1,011 mil sq ft/gal (24.8 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Two: Part A and Part B
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Reddish-Gray 

Reddish-Gray| rgb 119,114,110
Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductAromatic Urethane, Zinc-Rich

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents