find your coatings consultants
Find and contact a coatings consultant near you.

Series 82HS | Versatone

Generic Type Silicone Alkyd
Common Usage A high solids, single component, silicone-alkyd finish coat that provides superior color and gloss retention over conventional alkyd enamels. Primarily used for coating primed or previously painted steel and galvanized steel substrates. Versatone incorporates a 30% copolymerized silicone-alkyd resin, which provides unmodified maximum performance.
Colors Contact Tnemec Company
Finish Gloss
Primers Steel: Series 37H, 66, 88HS
Galvanized Steel and Non-Ferrous Metal: Series 27. Note: Series 27 exterior exposed for 3 weeks or longer requires an epoxy-polyamide intermediate coat or scarification prior to topcoating with 2H, 23 or 82HS. Brush blasting with fine abrasive is the preferred method of scarification.
Intermediate Series 2H, 23, 82HS. The intermediate coat color should be noticeably different but in the same family as the topcoat color.
Volume Solids 61.8 ± 2.0% †
Recommended DFT 1.5 to 2.5 mils (40 to 65 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 1/2-1 1/2 hours 12-14 hours 16 hours
45°F (7°C) 9 hours 4 days 4 1/2 days

Curing time varies with surface temperature, air movement, humidity and film thickness.
Water Tank Exteriors: Five days or more curing time required before filling with water.
Volatile Organic Compounds Unthinned: 2.57 lbs/gallon (307 grams/litre)
Thinned 5%: 2.76 lbs/gallon (330 grams/litre) †
Theoretical Coverage 991 mil sq ft/gal (24.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Vapor Mist 01GR

Vapor Mist| 01GR rgb 211,211,216
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductSilicone Alkyd

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents