find your coatings consultants
Find and contact a coatings consultant near you.

Series 633 | Prime-A-Pell H2O

Generic Type Siloxane/Silane Blend
Common Usage Prime-A-Pell H2O is a clear, filmless, low solids, penetrating water-based water repellent for virtually all above-grade, concrete, stucco, precast, brick, sandstone and block masonry. Concrete, stone and masonry treated with diluted Prime-A-Pell H2O resist water intrusion, stain damage, freeze/thaw spalling, efflorescence and rust damage. The treatment does not alter the color or texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. The solution penetrates the substrate and chemically reacts to create a powerful barrier against water penetration. This barrier is resistant to ultraviolet and water deterioration.
Colors Clear. Prime-A-Pell H2O is milky-white when applied but dries clear, leaving the aesthetic appearance of the substrate unchanged.
Topcoats If color is desired, apply Series 617 Conformal Stain WB within 12 to 36 hours after application of Series 633. Application of Series 617 outside of this time frame may compromise water-repellency and/or adhesion properties.
Curing Time Protect treated surfaces from rain and lawn sprinklers for 6 to 8 hours. (Time to resist moisture is increased at lower temperatures.) Allow 7 to 14 days before evaluating performance.
Volatile Organic Compounds EPA Method 24: 0.16 lbs/gallon (19 grams/litre)
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductSiloxane/Silane Blend
Volume Solids Rec. DFT V.O.C. # of Components
    EPA Method 24: 0.16 lbs/gallon (19 grams/litre)  
Series 636 | Dur A Pell 20 Silane/Siloxane Blend
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
    2.0 lbs/gallon (245 grams/litre)  

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents