Series 63-1500 | Filler and Surfacer

Generic Type Modified Amine Epoxy
Common Usage A non-shrinking, trowel-grade filler and surfacer for concrete or steel, with high bond strength and outstanding resistance to abrasion, impact, wet conditions, corrosive fumes and chemical contact.
Colors Mixed: Beige
Primers General Use, Concrete or Steel: Self-priming or Series 27, 46H-413, 61, 66, N69, N69F, 84, 104, 161
Potable Water Use, Concrete or Steel: Self-priming or Series 20, FC20, 91-H2O (steel only), N140
Topcoats General Use: Series 27, 46H-413, 54-660, 61, 66, N69, 104, 113, 114, 161, 201
Potable Water Use: Series 20, FC20, N140
Volume Solids 100% (mixed)
Recommended DFT Trowelled: 1/32” to 1/16” (0.8 mm to 1.6 mm)
Filling and Patching: Up to 2” (5 cm) deep
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 2-3 hours 24 hours 3 hours †

Curing time varies with surface temperature, air movement, humidity and film thickness.
† 12 hours if succeeding coat is squeegeed, rolled or brushed.
Volatile Organic Compounds 0.07 lbs/gallon (8 grams/litre)
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). One quart will cover 13 square feet (1.2 m²) at 31.0 dry mils (790 microns), or 1/32” (0.8 mm); or will fill 56 cubic inches (920 cm³).
Number Of Components Two: Part A and Part B

Filler & Surfacer was first used to fill holes that had been drilled to anchor the scaffolding for the Blessed Sacrament Cathedral in Sacramento California.