find your coatings consultants
Find and contact a coatings consultant near you.

Series 620 | Phylon 1422

Generic Type Methylmethacrylate Acrylic
Common Usage Phylon 1422 is a non-yellowing, acrylic coating that highlights the natural color of masonry by providing a clear, semi-gloss sheen. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Phylon 1422 provides a durable, wet-look finish to exposed aggregate, ground-face block, sandblasted concrete and many other vertical concrete, masonry and natural stone surfaces. Repels water when used on dense substrates.
Colors Clear. Dries to a clear, glossy finish. Treated surfaces will appear darker once product has cured.
Volume Solids 20%
Curing Time Series 620 is fully cured for light traffic bearing within 72 hours at 75°F (24°C). Application at temperatures lower than 40°F (4°C) may reduce coverage rates and inhibit curing. Protect treated surfaces from rain and lawn sprinklers for 72 hours. Allow the water-repellent pretreatment to cure between 12 and 36 hours, then apply Series 620.
Volatile Organic Compounds 5.8 lbs/gallon (700 grams/litre)
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductMethylmethacrylate Acrylic
Volume Solids Rec. DFT V.O.C. # of Components
20%   5.8 lbs/gallon (700 grams/litre)  
Series 625 | Conformal Clear Methylmethacrylate Acrylic/Hydrophobic Fumed Silica
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
16%   6.1 lbs/gallon (729 grams/litre)  

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC