find your coatings consultants
Find and contact a coatings consultant near you.

Series 61 | Tneme-Liner

Generic Type Cycloaliphatic Amine Epoxy
Common Usage Tightly cross-linked epoxy with excellent corrosion and chemical resistance. Principally used for immersion service, including fuel and crude oil storage, fuel pipelines, chemical containment and wastewater treatment.
Colors 5001 Gray and 5002 Beige
Finish Semi-gloss
Primers Steel: Self-priming
Concrete: Self-priming or Series 215, 217, 218
CMU: Series 215, 218
Topcoats Note: Series 61 can be topcoated with select Tank Armor linings depending on service conditions. Contact Tnemec Technical Service for recommendations.
Volume Solids 82.0 ± 2.0% (mixed) †
Recommended DFT 1. For JP-4, JP-5, JP-8, Aviation Gas and Jet A-1: 4.0 to 6.0 mils (100 to 150 microns) per coat (minimum of two coats).
2. Most Other Applications: 8.0 to 12.0 mils (205 to 305 microns) per coat (minimum of two coats). Contact your Tnemec representative for specific recommendations.
Curing Time
Temperature To Handle To Recoat Immersion
75°F (24°C) at 4.0 mils
(100 microns)
6 hours 16-18 hours• 5 to 7 days
75°F (24°C) at 12.0 mils
(305 microns)
11 hours 16-18 hours• 5 to 7 days
Curing time varies with surface temperature, air movement, humidity and film thickness.
• Maximum recoat time with itself is 7 days. Extended maximum recoat time of 14 days is allowed when used as a primer for Tank Armor products. If recoat time is exceeded, the coated surface must be scarified before topcoating.
Volatile Organic Compounds EPA Method 24
Unthinned: 0.36 lbs/gallon (45 grams/litre)
Thinned 6%: 0.71 lbs/gallon (85 grams/litre)
Thinned 10%: 1.21 lbs/gallon (145 grams/litre) †
HAPS Unthinned: 1.53 lbs/gal solids
Thinned 10%: 2.42 lbs/gal solids
Theoretical Coverage 1,315 mil sq ft/gal (32.3 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A (amine) and Part B (epoxy)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
1, 1, 1-Trichloroethane

Also Known As: Trichloroethane

140°F (60°C) 120°F (49°C) 120°F (49°C)
Acetaldehyde NR NR NR NR NR
Acetic Acid
Acetic Acid, Glacial NR NR NR NR NR
Acetic Anhydride
Acetone 100°F (38°C)
Acetonitrile
Acrylic Acid
Acrylic Latex Solution 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Acrylonitrile
Activated Carbon 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Adipic Acid (Dry) 100°F (38°C) 100°F (38°C)
Allyl Chloride NR NR NR NR NR
Aluminum Chloride
Aluminum Hydroxide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Aluminum Nitrate
Aluminum Sulfate

Also Known As: Alum

Ammonium Bisulfite 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Carbonate 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Chloride
Ammonium Fluoride NR NR NR NR NR
Ammonium Hydroxide
Ammonium Lauryl Sulfate
Ammonium Nitrate
Ammonium Nitrite
Ammonium Perchlorate (Dry) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Persulfate
Ammonium Phosphate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfite 100°F (38°C) 100°F (38°C) 100°F (38°C)
Amyl Acetate 100°F (38°C) 100°F (38°C)
Aniline
Animal Fats 100°F (38°C) 100°F (38°C) 100°F (38°C)
Aqua Ammonia 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Aqua Regia 100°F (38°C)
Aviation Gas 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
B20 Bio Diesel 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C) 120°F (49°C)
Barium Chloride
Barium Hydroxide
Barium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Barium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Barium Sulfide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Beer (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Benzene 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Benzene Sulfonic Acid NR NR NR NR NR
Benzoic Acid NR NR NR NR NR
Benzoyl Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Benzyl Alcohol 100°F (38°C)
Benzyl Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Borax 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Boric Acid
Butyl Acrylate NR NR NR NR NR
Butyl Amine NR NR NR NR NR
Butyric Acid NR NR NR NR NR
Cadmium Bromide
Cadmium Chloride
Cadmium Plating (Cyanide) NR NR NR NR NR
Calcium Bisulfate NR NR NR NR NR
Calcium Bromide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Carbonate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Chloride
Calcium Hydroxide

Also Known As: Lime Slurry

Calcium Hypochlorite
Calcium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Nitrite 100°F (38°C)
Calcium Oxide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Sulfite 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Caprolactam 100°F (38°C) 100°F (38°C) 100°F (38°C)
Carbon Disulfide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Carbon Tetrachloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Castor Oil 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chlorine Dioxide 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chlorobenzene NR NR NR NR NR
Chloroform NR NR NR NR NR
Chlorosulfonic Acid NR NR NR NR NR
Chromic Acid
Citric Acid
Coal (high and low sulfur) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cola (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Copper Acetate
Copper Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Copper Sulfate
Copper Sulfate (dry) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Corn Mash Solution (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Corn Oil (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cottonseed Oil (non-food contact) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cresylic Acid NR NR NR NR NR
Crude Oil (Sour) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Crude Oil (Sweet) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cumene Hydroperoxide NR NR NR NR NR
Cuprous Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexane 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexanol 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexanone 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexlamine NR NR NR NR NR
Dextrose 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Diacetone Alcohol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Dibutyl Phthalate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Gray Topcoat 

Gray Topcoat| rgb 168,168,162
Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductCycloaliphatic Amine Epoxy
Volume Solids Rec. DFT V.O.C. # of Components
82.0 ± 2.0% (mixed) † 1. For JP-4, JP-5, JP-8, Aviation Gas and Jet A-1: 4.0 to 6.0 mils (100 to 150 microns) per coat (minimum of two coats).
2. Most Other Applications: 8.0 to 12.0 mils (205 to 305 microns) per coat (minimum of two coats). Contact your Tnemec representative for specific recommendations.
EPA Method 24
Unthinned: 0.36 lbs/gallon (45 grams/litre)
Thinned 6%: 0.71 lbs/gallon (85 grams/litre)
Thinned 10%: 1.21 lbs/gallon (145 grams/litre) †
Two: Part A (amine) and Part B (epoxy)
Series 104 | H.S. Epoxy Cycloaliphatic Amine Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
82.0 ± 2.0% (mixed) † 4.0 to 10.0 mils (100 to 255 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. EPA Method 24 †
Unthinned: 0.80 lbs/gallon (96 grams/litre)
Thinned 10% (No. 2 Thinner): 1.92 lbs/gallon (230 grams/litre)
Thinned 10% (No. 49 Thinner): 0.80 lbs/gallon (96 grams/litre)
Two: Part A (amine) and Part B (epoxy)