find your coatings consultants
Find and contact a coatings consultant near you.

Series 607 | Conformal Stain

Generic Type Methylmethacrylate Acrylic/Hydrophobic Fumed Silica
Common Usage Conformal Stain is a penetrating, solvent-based masonry stain for horizontal concrete and virtually all vertical, above-grade concrete, precast, GFRC, exposed aggregate, stucco, terra cotta, brick and block masonry. The treatment does not alter the natural texture of the surface, nor significantly affect the vapor transmission qualities of the substrate. Conformal Stain exhibits excellent color stability and is designed not to peel or flake when applied to a properly prepared substrate.
Repels water when used on dense substrates.
Colors Conformal Stain is available in 20 standard colors. Custom color matching is available. A semi-transparent finish may be achieved by blending Conformal Stain with Conformal Clear; this will allow exposed aggregate to remain visible while rendering color uniformity to the matrix. Please contact your Tnemec representative.
Volume Solids 19% †
Curing Time Series 607 is fully cured for light traffic bearing within 72 hours at 75°F (24°C). Application at temperatures lower than 40°F (4°C) may reduce coverage rates and inhibit curing. Protect treated surfaces from rain and lawn sprinklers for 72 hours. Allow the water-repellent pretreatment to cure 12 hours, then apply Series 607.
Volatile Organic Compounds 6.1 lbs/gallon (729 grams/litre) †
Chemical Name(required)
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)


Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.

Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Standard White WHSTWH

Standard White| WHSTWH rgb 227,229,223
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductMethylmethacrylate Acrylic/Hydrophobic Fumed Silica
Volume Solids Rec. DFT V.O.C. # of Components
19% †   6.1 lbs/gallon (729 grams/litre) †  
Series 617 | Conformal Stain WB 100% Acrylic Polymer
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
28.99 ± 2.0% †   0.46 lbs/gallon (55 grams/litre) †