find your coatings consultants
Find and contact a coatings consultant near you.

Series 46H-413 | Hi-Build Tneme-Tar

Generic Type Polyamide Epoxy-Coal Tar
Common Usage High-build corrosion resistant coating providing one coat protection for concrete and steel in a variety of chemical, immersion and underground conditions. Also, when a two-coat application is desired, a low film build option is possible.
Colors Black
Finish Semi-gloss
Primers Steel: Self-priming or Series 1, 66, N69, N69F, 90-97, H90-97, 161
Galvanized Steel: Series 66, N69, N69F, 161
Concrete: Self-priming, 63-1500, 218
Volume Solids 75.0 ± 2.0% (mixed)
Recommended DFT 16.0 to 20.0 mils (405 to 510 microns)
8.0 to 10.0 mils (200 to 250 microns) for the two-coat option
Curing Time
Temperature To Touch To Recoat (Min./Max) Immersion
95°F (35°C) 2 hours 3-14 hours 5 days
85°F (29°C) 3 hours 4-18 hours 6 days
75°F (24°C) 4 hours 6-28 hours 7 days
65°F (18°C) 6 hours 10-50 hours 10 days
55°F (13°C) 9 hours 16 hrs-3 days 14-16 days
45°F (7°C) 18 hours 32 hrs-4 days 22-24 days
35°F (2°C) 26 hours 44 hrs-6 days 28-32 days

Curing time varies with surface temperature, air movement, humidity and film thickness.
Use the above times as guidelines only. Scarify the surface with fine abrasive before recoating if the maximum recoat time has been exceeded.
Volatile Organic Compounds Unthinned: 1.91 lbs/gallon (229 grams/litre)
Thinned 20% (No. 2 Thinner): 2.80 lbs/gallon (335 grams/litre)
Thinned 20% (No. 65 Thinner): 1.91 lbs/gallon (229 grams/litre)
Theoretical Coverage 1,203 mil sq ft/gal (29.5 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Two: Part A and Part B

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


1, - Met Met - Zin
Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
1, 1, 1-Trichloroethane

Also Known As: Trichloroethane

NR NR NR NR NR
Acetic Acid
Acetic Acid, Glacial NR NR NR NR NR
Acetic Anhydride
Acetone 100°F (38°C)
Acrylic Acid
Acrylic Latex Solution NR NR NR NR NR
Activated Carbon 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Adipic Acid (Dry) NT NT NT NT NT
Aluminum Chloride
Aluminum Hydroxide NT NT NT NT NT
Aluminum Sulfate

Also Known As: Alum

Ammonium Chloride 100°F (38°C) 100°F (38°C)
Ammonium Hydroxide
Ammonium Nitrate
Ammonium Nitrite
Ammonium Perchlorate (Dry) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Phosphate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ammonium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Amyl Acetate NR NR NR NR NR
Aniline NR NR NR NR NR
Aqua Regia NR NR NR NR NR
Aviation Gas NR NR NR NR NR
Barium Chloride
Barium Hydroxide
Barium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Barium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Benzene 100°F (38°C)
Borax 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Boric Acid
Butyric Acid NR NR NR NR NR
Calcium Carbonate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Chloride
Calcium Hydroxide

Also Known As: Lime Slurry

Calcium Hypochlorite
Calcium Nitrate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Oxide 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Calcium Sulfate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Chromic Acid
Citric Acid
Copper Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C)
Copper Sulfate
Corn Mash Solution (non-food contact) 100°F (38°C) 100°F (38°C)
Crude Oil (Sour) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Crude Oil (Sweet) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexane 100°F (38°C) 100°F (38°C) 100°F (38°C)
Cyclohexanol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Dibutyl Phthalate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Diesel Fuel

Also Known As: Fuel Oil, Diesel Oil

100°F (38°C) 100°F (38°C) 100°F (38°C)
Diethanolamine 100°F (38°C) 100°F (38°C) 100°F (38°C)
Diethylene Glycol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Dioctyl Phthalate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Dipropylene Glycol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ethanol

Also Known As: Ethyl Alcohol, Denatured Alcohol

100°F (38°C) 100°F (38°C) 100°F (38°C)
Ethyl Benzene NR NR NR NR NR
Ethylene Glycol 100°F (38°C) 100°F (38°C) 100°F (38°C)
Fatty Acids (Greater than C6) 100°F (38°C)
Ferric Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Ferric Sulfate
Formaldehyde
Formic Acid
Furan NR NR NR NR NR
Furfuryl Alcohol NR NR NR NR NR
Gasohol E10 (10% Ethanol) NR NR NR NR NR
Gasohol E15 (15% Ethanol) NR NR NR NR NR
Gasohol E30 (30% Ethanol) NR NR NR NR NR
Gasohol E50 (50% Ethanol) NR NR NR NR NR
Gasohol E85 (85% Ethanol) NR NR NR NR NR
Gasoline (Reformulated) NR NR NR NR NR
Gasoline (Unleaded) NR NR NR NR NR
Gasoline (w/ETBE, 15% max) NR NR NR NR NR
Gasoline (w/TAME, 15% max) NR NR NR NR NR
Gasoline (w/TBA, 15% max) NR NR NR NR NR
Gasoline (w/WTBE, 15% max) NR NR NR NR NR
Glycerin 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Heptane 100°F (38°C) 100°F (38°C)
Hexane 100°F (38°C) 100°F (38°C)
Hexanol 100°F (38°C)
Hydraulic Fluid

Also Known As: Hydraulic Oil

NT NT NT NT NT
Hydrochloric Acid
Hydrofluoric Acid
Hydrogen Peroxide
Hydrogen Sulfide 100°F (38°C) 100°F (38°C)
Iodine
Isobutyl Acetate 100°F (38°C) 100°F (38°C)
Isobutyl Alcohol 100°F (38°C) 100°F (38°C)
Isopropyl Acetate 100°F (38°C) 100°F (38°C)
Isopropyl Alcohol 100°F (38°C) 100°F (38°C)
Jet A Fuel NR NR NR NR NR
JP-4 Aviation Fuel NR NR NR NR NR
JP-5 Aviation Fuel NR NR NR NR NR
Kerosene NR NR NR NR NR
Lactic Acid
Lead Acetate 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Linseed Oil 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Lithium Chloride 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C) 100°F (38°C)
Lubricating Oil (SAE 5W-40, et al)

Also Known As: Motor Oil

100°F (38°C) 100°F (38°C)
Magnesium Chloride
Magnesium Hydroxide
Methanol

Also Known As: Methyl Alcohol

NR NR NR NR NR
1, - Met Met - Zin

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductPolyamide Epoxy-Coal Tar
Volume Solids Rec. DFT V.O.C. # of Components
75.0 ± 2.0% (mixed) 16.0 to 20.0 mils (405 to 510 microns)
8.0 to 10.0 mils (200 to 250 microns) for the two-coat option
Unthinned: 1.91 lbs/gallon (229 grams/litre)
Thinned 20% (No. 2 Thinner): 2.80 lbs/gallon (335 grams/litre)
Thinned 20% (No. 65 Thinner): 1.91 lbs/gallon (229 grams/litre)
Two: Part A and Part B
Series 46-465 | H.B. Tnemecol Coal Tar
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
64.0 ± 2.0% 8.0 to 12.0 mils (205 to 305 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative. Unthinned: 2.56 lbs/gallon (306 grams/litre)
Thinned 5%: 2.78 lbs/gallon (333 grams/litre)
One

GET THE LATEST NEWS AND UPDATES BY EMAIL FROM TNEMEC

support documents