||Fiber-Reinforced Modified Polyamine Epoxy
||A thick film, 100% solids, spray-applied, abrasion-resistant coating designed for wastewater immersion and fume environments. Provides excellent resistance to H2S gas permeation, protects against MIC and provides chemical resistance to severe wastewater environments. Fiber-reinforcement provides superior physical strength and higher film build.
||5020 Gray. Note: Epoxies chalk with extended exposure to sunlight.
||Series 215, 217, 218
||Concrete: Self-priming or Series 201.
||Series 435 (optional)
||Concrete: 50.0 to 125.0 mils (1270 to 3175 microns) in one or two coats. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Note: If more than 7 days have elapsed between coats, the Series 436 coated surface must be mechanically abraded before topcoating. Curing time will vary with surface temperature, air movement, humidity and film thickness.
|Temperature || To Touch || Dry Through || To Place in Service || Max. Recoat|
| 75°F (24°C) || 3 hours || 14 hours || 2 days || 7 days |
| 55°F (13°C) || 7 hours || 30 hours || 3 days || 7 days |
|Volatile Organic Compounds
||EPA Method 24: 0.23 lbs/gallon (28 grams/litre)
||1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
|Number of Components
||Two: Part A (Amine) and Part B (Epoxy)