find your coatings consultants
Find and contact a coatings consultant near you.

Series 30 | Spra-Saf EN

Generic Type Hydrophobic Acrylic Polymer
Common Usage An advanced technology, direct-to-metal, corrosion-inhibiting coating with very good early flash-rust resistance, as well as long term corrosion protection and weathering properties. Formulated to resist mildew growth on the paint film. Provides good gloss and color retention on structural steel, tanks, towers, pipes and similar structures. May also be used on a wide range of other substrates and many aged coatings, interior or exterior (test patch is recommended per Technical Bulletin 98-10). Application methods include “dry-fall” under certain conditions (see Application).
Note: Spra-Saf EN’s “dry-fall” characteristics help reduce the potential for overspray problems on buildings and surrounding property.
Colors Refer to Tnemec Color Guide.
Finish Satin
Primers Steel: Self-priming or Series 10, 27, 37H, 66, L69, N69, N69F, 90E-92, 115, 135, L140, L140F, N140, 151, 161.
Note: Allow Series 10 and 37H to cure one week before topcoating.
Topcoats Series 30, 1028, 1029
Volume Solids 38.0 ± 2.0% †
Recommended DFT 2.0 to 4.0 mils (50 to 100 microns) per coat. Note: Number of coats required will vary depending on color, substrate (surface) and other variables. Contact your Tnemec representative.
Curing Time
Temperature To Touch To Handle To Recoat
75°F (24°C) 1 hour 3 hours 4 hours

Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 1.60 lbs/gallon (192 grams/litre)
Thinned 5%: 1.60 lbs/gallon (192 grams/litre) †
HAPS Unthinned: 1.03 lbs/gal solids
Thinned 5%: 1.03 lbs/gal solids
Theoretical Coverage 610 mil sq ft/gal (15.0 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components One
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service

1 Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates    to product's performance capabilities only.

2 Product is suitable for direct or indirect food contact. Reference the product data sheet for more information.

  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Vapor Mist 01GR

Vapor Mist| 01GR rgb 211,211,216
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductHydrophobic Acrylic Polymer