Series 296 | Enviro-Glaze Clear

Generic Type Ceramic-Modified Waterborne Aliphatic Polyurethane
Common Usage A clear, low odor, fast dry, low VOC, waterborne polyurethane floor coating for interior wall and floor applications. Provides enhanced abrasion resistance and stain resistance. This user friendly product has easy application and clean-up characteristics and may be applied over a properly prepared aged coating (test patch is recommended for compatibility). Contact your Tnemec representative for more details.
Colors Clear
Finish Gloss
Primers Concrete: Series 201, 205, 280, 281, 287.
Intermediate Series 205, 210, 222, 223, 224, 237, 238, 280, 281, 284, 285, 287 and 297. Note: Series 222, 223, 224, 237 can be coated with 296 only after 284 or 285 has been applied.
Volume Solids 53 ± 2.0% (mixed) †
Recommended DFT 2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Application of coating below minimum or above maximum recommended dry film thicknesses may adversely affect coating aesthetics and performance. Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
TemperatureTo TouchTo RecoatTo ServiceFull Cure
75°F (24°C)2 hours8 hours24 hours72 hours
Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 1.08 lbs/gallon (129 grams/litre)
Thinned 20%: 1.08 lbs/gallon (129 grams/litre) †
Theoretical Coverage 842 sq ft/gal (20.7 m²/L at 25 microns) †
Number of Components Two: Part A and Part B

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductCeramic-Modified Waterborne Aliphatic Polyurethane
Volume SolidsRec. DFTV.O.C.# of Components
53 ± 2.0% (mixed) †2.0 to 3.0 mils (50 to 75 microns) per coat. Note: Application of coating below minimum or above maximum recommended dry film thicknesses may adversely affect coating aesthetics and performance. Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.Unthinned: 1.08 lbs/gallon (129 grams/litre)
Thinned 20%: 1.08 lbs/gallon (129 grams/litre) †		Two: Part A and Part B
Series 294 | Clear CRU Aliphatic Polyester Polyurethane
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
66 ± 2.0% (mixed)2.0 to 3.0 mils (50 to 75 microns) per coat.Unthinned: 2.36 lbs/gallon (282 grams/litre)
Thinned 20% (No. 39 Thinner): 3.02 lbs/gallon (362 grams/litre)		Two: Part A and Part B (2.5 Parts A to 1 Part B by volume)
Series 295 | Clear CRU Aliphatic Polyester Polyurethane
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
62 ± 2.0% (mixed)2.0 to 3.0 mils (50 to 75 microns) per coat.Unthinned: 2.86 lbs/gallon (343 grams/litre)
Thinned 8%: 3.12 lbs/gallon (373 grams/litre)		Two: Part A and Part B (2.5 Parts A to 1 Part B by volume)

Email this product