Series 287 | Enviro-Pox

Generic Type Waterborne Epoxy-Amine Adduct
Common Usage A low odor, rapid cure, wear-resistant coating for floors, walls and other substrates, capable of withstanding moderate commercial and industrial environments. It can withstand mild to moderate chemical and solvent exposures, as well as repeated cleaning. Can also be used as a primer or intermediate coat for thin film epoxy and urethane and acrylic systems.
Colors Available in clear and the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Semi-gloss
Surfacer/Filler/Patcher Series 130, 215, 218, 1254. Note: A repair kit of 201, with Part C fumed silca, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Self-priming or Series 27WB, 201, 203, 205
CMU: Self-priming over filled CMU
Wood & Drywall: Self-priming or Series 201, 203
Topcoats Series 73, 280, 290, 291, 294, 295, 296, 297, 1074, 1075, 1080, 1081
Volume Solids 51.0 ± 2.0% (mixed) †
Recommended DFT Horizontal: 2.0 to 4.0 mils (50 to 100 microns) per coat. (Apply minimum of 2 coats to unpainted floors.)
Vertical: 2.0 to 3.0 mils (50 to 75 microns) per coat.
Curing Time
Temperature • To Topcoat To Place in Service
60°F (16°C) 6-7 hours 8-10 hours
75°F (24°C) 4-5 hours 7-8 hours
85°F (29°C) 1 1/2-3 hours 4-6 hours
• 50% relative humidity. Curing time varies with surface temperature, air movement, humidity and film thickness.
Volatile Organic Compounds Unthinned: 0.05 lbs/gallon (6 grams/litre)
Thinned 5% (Water): 0.05 lbs/gallon (6 grams/litre) †
Theoretical Coverage 818 mil sq ft/gal (20.1 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A (epoxy) and Part B (amine) — 2 Parts A to 1 Part B by volume

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductWaterborne Epoxy-Amine Adduct
Volume SolidsRec. DFTV.O.C.# of Components
51.0 ± 2.0% (mixed) †Horizontal: 2.0 to 4.0 mils (50 to 100 microns) per coat. (Apply minimum of 2 coats to unpainted floors.)
Vertical: 2.0 to 3.0 mils (50 to 75 microns) per coat.		Unthinned: 0.05 lbs/gallon (6 grams/litre)
Thinned 5% (Water): 0.05 lbs/gallon (6 grams/litre) †		Two: Part A (epoxy) and Part B (amine) — 2 Parts A to 1 Part B by volume
Series 205 | Terra-Tread FC Polyamide Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
58.0 ± 2.0% (mixed) †3.0 to 5.0 mils (75 to 125 microns) per coat.
Note: As a stand alone system, two or more coats may be required.		Unthinned: 2.93 lbs/gallon (351 grams/litre)
Thinned 5%: 3.12 lbs/gallon (373 grams/litre)
Thinned 10%: 3.29 lbs/gallon (394 grams/litre) †		Two: Part A and Part B (1 Part A component to 1 Part B component by volume.)
Series 280 | Tneme-Glaze Modified Polyamine Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed) †Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.		Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †		Two: Part A and Part B (2 Parts A to 1 Part B by volume)
Series 281 | Tneme-Glaze Modified Polyamine Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed) †6.0 to 12.0 mils (150 to 305 microns) per coat. Additional coats may be required for appearance or hiding.Unthinned: 0.06 lbs/gallons (8 grams/litre)
Thinned 5% (No. 2 Thinner): 0.41 lbs/gallons (49 grams/litre) † 		Two: Part A and Part B (2 Parts A to 1 Part B by volume)
Series 282 | Tneme-Glaze Polyamine Novolac Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed) †Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat.
Additional coats may be required for appearance or hiding.		Unthinned: 0.19 lbs/gallon (23 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †		Two: Part A and Part B (1 Part A to 1 Part B by volume)

Email this product

Series 287 Enviro-Pox was used on the floors at Nebraska Furniture Mart in Omaha, NE.

Support Documents