Series 285 | Satinglaze

Generic Type Modified Polyamine Epoxy
Common Usage A clear finish with an orange peel texture for diffusing light and reducing glare. Used as an optional finish for decorative color quartz or flake filled flooring systems.
Coves and Vertical Surfaces: Series 285 can be used to build grout and seal vertical surfaces such as 4” base and wainscot.
Colors Clear. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Orange Peel
Intermediate Series 284 Note: Series 222, 223, 224, 237, 238 should be coated with 285 only after a grout coat of 284 has been applied.
Topcoats Series 247, 248, 294, 295, 296
Volume Solids 100% (mixed)
Recommended DFT 4.0 to 6.0 mils (100 to 150 microns) per coat.
Curing Time
Temperature To Recoat To Place in Service
75°F (24°C) 12-24 hours 24 hours
Note: This product is not normally topcoated, but should there be a reason and more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Volatile Organic Compounds Unthinned: 0.17 lbs/gallon (20 grams/litre)
Theoretical Coverage 1,604 mil sq ft/gal (36.2 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Two: Part A and Part B

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamine Epoxy
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed)4.0 to 6.0 mils (100 to 150 microns) per coat.Unthinned: 0.17 lbs/gallon (20 grams/litre)Two: Part A and Part B
Series 286 | Deco-Clear CR Modified Novolac Polyamine Epoxy
Hide this product's data
Volume SolidsRec. DFTV.O.C.# of Components
100% (mixed)As a finish coat: 8.0 to 12.0 mils (205 to 305 microns) per coat.Unthinned: 0.13 lbs/gallon (15.48 grams/litre)
Thinned 5% (No. 2 Thinner): 0.47 lbs/gallon (56.0 grams/litre)		Two: Part A and Part B (2 Parts A component to 1 Part B component by volume)

Email this product

Series 285 Satinglaze was used as the topcoat for the Maricopa Animal Control Facility in Phoenix, AZ to provide a long-lasting, glossy shine.

Support Documents