||Modified Polyamine Epoxy
||A high-gloss, glaze-like coating for concrete floors. It imparts a smooth, aesthetically pleasing finish in a variety of colors, while providing protection against various acids and alkalis, abrasion and frequent cleaning.
||Available in the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
||Series 215. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
||Concrete Floors: Self-priming or Series 201, 203, 205, 237, 238. Note: Self-priming is not recommended when used as a horizontal floor coating.
||Series 210, 237, 238, 281
||Series 247, 248, 280, 281, 290, 291, 294, 295, 296, 297
||100% (mixed) †
||6.0 to 12.0 mils (150 to 305 microns) per coat. Additional coats may be required for appearance or hiding.
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
|Temperature || To Topcoat || To Place in Service|
| 75°F (24°C) || 10-24 hours || 24 hours |
|Volatile Organic Compounds
||Unthinned: 0.06 lbs/gallons (8 grams/litre)
Thinned 5% (No. 2 Thinner): 0.41 lbs/gallons (49 grams/litre) †
||1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
|Number of Components
||Two: Part A and Part B (2 Parts A to 1 Part B by volume)