find your coatings consultants
Find and contact a coatings consultant near you.
mag-icon

Series 280 | Tneme-Glaze

Generic Type Modified Polyamine Epoxy
Common Usage A glaze-like corrosion resistant coating for walls, ceilings, floors and other surfaces; resistant to frequent pressurized hot water and detergent cleaning. Used as a topcoat/sealer for heavy duty wall and floor systems or in a stand-alone high-performance function. Excellent chemical, stain- and abrasion-resistance for a variety of substrates.
Colors Available in the 16 standard StrataShield colors. Special colors available, please contact your Tnemec representative. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Finish Gloss. (Roller application provides an orange peel finish.)
Surfacer/Filler/Patcher Series 130, 215, 218, 1254. Note: A repair kit of 201, with Part C fumed silica, is available for small patching/surfacing repairs. For more extensive repairs and additional information, contact your Tnemec representative or Tnemec Technical Services.
Primers Concrete: Self-priming or Series 27WB, 201, 203, 205, 237, 238. Note: Self-priming is not recommended when used as a horizontal floor coating.
CMU: Self-priming over filled CMU
Wood & Drywall: Self-priming or Series 201, 203
Intermediate Series 210, 237, 237SC, 238, 270, 273, 280
Topcoats Series 73, 280, 290, 291, 294, 295, 297, 1074, 1075, 1080, 1081
Volume Solids 100% (mixed) †
Recommended DFT Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat
Additional coats may be required for appearance or hiding.
Curing Time
Temperature To Topcoat To Place in Service
75°F (24°C) 8-24 hours 24 hours
Note: If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Volatile Organic Compounds Unthinned: 0.19 lbs/gallon (22 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (59 grams/litre) †
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B (2 Parts A to 1 Part B by volume)

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical <90°F (32°C) 90-120°F
(32-49°C)
120-140°F
(49-60°C)
140-160°F
(60-71°C)
160-180°F
(71-82°C)
180-200°F
(82-93°C)
200-220°F
(93-104°C)
Acetaldehyde FC
Acetic Acid
Acetic Acid, Glacial NR
Acetic Anhydride
Acetone OC
Acetyl Chloride NR
Acrylic Acid
Acrylonitrile
Adipic Acid
Allyl Alcohol FC
Allyl Chloride NT
Aluminum Bromide FC
Aluminum Chloride SC
Aluminum Nitrate
Aluminum Sulfate

Also Known As: Alum

Ammonium Bisulfite FC
Ammonium Chloride SC
Ammonium Fluoride NT
Ammonium Hydroxide
Ammonium Lauryl Sulfate
Ammonium Nitrate SC
Ammonium Persulfate SC
Ammonium Sulfate SC
Ammonium Sulfide SC
Ammonium Sulfite SC
Ammonium Xylene Sulfonate
Amyl Acetate FC
Amyl Alcohol NT
Aniline NR
Aniline Hydrochloride NT
Antimony Chloride (tri) FC
Aqua Ammonia SC
Aqua Regia OC
Arsenous Acid NT
Barium Chloride
Barium Hydroxide
Barium Sulfate IS
Barium Sulfide SC
Beer* NT
Benzal Chloride SC
Benzaldehyde SC
Benzene IS
Benzene Sulfonic Acid FC
Benzene Thiol NR
Boric Acid
Bromine
Bromine Gas (Dry) NT
Bromine Gas (Wet) NT
Butyl Acid Levulinic FC
Butyl Acrylate NT
Butyl Amine NR
Butyl Ether FC
Butyric Acid NR
Cadmium Chloride FC
Cadmium Plating (Cyanide) FC
Calcium Bisulfite FC
Calcium Carbonate SC
Calcium Chloride
Calcium Hydroxide

Also Known As: Lime Slurry

Calcium Hypochlorite
Calcium Nitrate IS
Calcium Nitrite NT
Calcium Oxide
Calcium Sulfate IS
Calcium Sulfite FC
Caprylic Acid

Also Known As: Octanoic Acid

NT
Carbon Bisulfide (Di) Fumes (wet) FC
Carbon Dioxide SC
Carbon Tetrachloride FC
Castor Oil SC
Chloracetic Acid
Chlorine Dioxide SC
Chloroacetic Acid
Chlorobenzene SC
Chlorobutane NT
Chloroform NR
Chlorophenol NR
Chlorosulfonic Acid NR
Chlorotoluene FC
Chromic Acid
Chromic Chloride SC
Citric Acid
Copper Chloride IS
Copper Nitrate FC
Copper Plating (Acid) FC
Copper Plating (Cyanide) FC
Copper Sulfate
Copper Sulfate (dry) SC
Corn Oil* FC
Cottonseed Oil* SC
Cresol NR
Cresylic Acid NR
Crude Oil (Sour) IS
Cumene NR
Cyclohexane IS
Cyclohexanone FC
Cymene FC
Dextrose SC
Dibromopropane Phosphate FC
Dibutyl Phthalate IS
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant.
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In White 11WH

White| 11WH (formerly WH01) rgb 242,238,231
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductModified Polyamine Epoxy
Series 282 | Tneme-Glaze Polyamine Novolac Epoxy
Hide this product's data
Volume Solids Rec. DFT V.O.C. # of Components
100% (mixed) † Horizontal: 6.0 to 12.0 mils (150 to 305 microns) per coat.
Vertical: 4.0 to 8.0 mils (100 to 205 microns) per coat.
Additional coats may be required for appearance or hiding.
Unthinned: 0.19 lbs/gallon (23 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre) †
Two: Part A and Part B (1 Part A to 1 Part B by volume)

GET THE LATEST NEWS AND UPDATES FROM TNEMEC

support documents

VIEW MORE