Series 27WB | Typoxy

Generic Type Inorganic Hybrid Water-Based Epoxy
Common Usage An advanced generation, low odor, high solids, water-based epoxy coating for protection and finishing of steel and concrete. For use on the interior and exterior of tanks, pipes and equipment. Superior wetting for marginally prepared steel and tightly adhering old coatings. This coating is ideally suited for steel fabrication and OEM applications. Also widely used as a field tie-coat. Provides fast curing and rapid handling capabilities.
Colors 1255 Beige, 00WH Tnemec White, 39BL Delft Blue, 35GR Black, 33GR Gray
Finish Eggshell
Primers Steel: Self-priming or Series 1, 66, L69, L69F, N69, N69F, V69, V69F, 90G-1K97, 90-97, H90-97, 91-H2O, 94-H2O, 161, 394. Note: Series 1, 90G-1K97, 90-97, H90-97, 91-H2O, 94-H2O and 394 must be exterior exposed for three days prior to topcoating.
Galvanized Steel: Self-priming
Concrete: Self-priming, 215, 217, 218, 1254
CMU: Self-priming, 130, 215, 1254
Drywall: Self-priming, 151
Topcoats Series 6, 30, 35, 73, 113, 114, 115, 156, 157, 158, 180, 181, 280, 281, 287, 290, 291, 297, 400, 406, 435, 446, 740, 750, 1028, 1029, 1070, 1070V, 1071, 1071V, 1072, 1072V, 1074, 1075, 1077, 1078, 1080, 1081
Volume Solids 100% (mixed) †
Recommended DFT 4.0 to 14.0 mils (100 to 350 microns) per coat. Note: Number of coats and thickness requirements will vary with substrate, application method and exposure. Contact your Tnemec representative.
Curing Time
TemperatureTo TouchTo HandleTo Recoat
95°F (35°C)30 minutes1 hour2 hours
75°F (24°C) 1 hour2 hours3 hours
55°F (13°C)2 hours4 1/2 hours6 hours
Curing time varies with surface temperature, air movement, humidity and film thickness. For immersion service cure a minimum of 24 hours at 75°F (24°C).
Volatile Organic Compounds Unthinned: 0.05 lbs/gallon (6.6 grams/litre) †
HAPS 0 lbs/gal solids
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates. †
Number of Components Two: Part A and Part B (One Part A to One Part B by volume.)

Email this product

Support Documents