find your coatings consultants
Find and contact a coatings consultant near you.

Series 273 | Stranlok ML

Generic Type Polyamine Epoxy
Common Usage A fiberglass mat reinforced coatings system for walls and ceilings providing cleanability and protection against chemical and physical abuse. Provides a high-performance, smooth, seamless surface with excellent chemical, stain, impact and abrasion resistance.
Colors 15BR Pale. Note: Epoxies chalk and yellow with age, extended exposure to UV and artificial lighting. Caution should be taken when selecting white and light pastel colors. Lack of ventilation, incomplete mixing, miscatalyzation or the use of heaters that emit carbon dioxide and carbon monoxide during application and initial stages of curing may cause amine blush, possibly affecting adhesion of subsequent topcoats.
Surfacer/Filler/Patcher CMU, Concrete & Cement Board: Series 215 or 218. Series 201 or 273 mixed with fumed silica (refer to Technical Bulletin 98-11). Note: Series 215 can also be used as a bedding coat for Series 273 Stranlok ML system. Refer to the applicable product data sheet for additional information.
Primers Wall Board, Wood & Drywall: Self-priming or Series 27WB, 151, 201, 233
Note For taping joints on drywall, use a high quality taping compound such as Sheetrock brand Durabond 90.
Topcoats Series 22, 27WB, 73, 113, 114, 280, 280FC, 282, 287, 290, 297, 1074, 1075, 1080, 1081. Note: Series 273 saturant coat must be topcoated with 22, 27WB, 280, 280FC or 282 prior to application of other finish coats. Refer to the applicable product data sheet for color availability and additional information.
Volume Solids 100% (mixed)
Recommended DFT 20 to 25 mils (508 to 635 microns) including fiberglass reinforcing mat.
Curing Time
Temperature To Topcoat To Place in Service
75°F (24°C) 8-24 hours 24 hours
If more than 24 hours have elapsed between coats, the coated surface must be mechanically abraded before topcoating.
Volatile Organic Compounds Unthinned: 0.16 lbs/gallon (19 grams/litre)
Thinned 5% (No. 2 Thinner): 0.52 lbs/gallon (63 grams/litre)
Thinned 5% (No. 42 Thinner): 0.50 lbs/gallon (60 grams/litre)
Theoretical Coverage 1,604 mil sq ft/gal (39.4 m²/L at 25 microns). See APPLICATION for coverage rates.
Number of Components Three: Liquids Part A (epoxy) and Part B (amine)
Fiberglass Reinforcing Mat Part C (S273-0273C)
1
Category
2
Chemical Name(required)
3
Concentration
4
What is this?

Note: Not Recommended (NR), Not Tested (NT), Please Call (PC)

 

Chemical Recommended Use - What is this?

The chemical resistance data listed on this website should only be used for general reference purposes. Substrates, temperatures, chemical combinations, and other variables can affect the performance of a coating in chemical exposure. Please contact your local to finalize the most appropriate system for your project.

Click the following button to download a PDF of the list of chemicals below.

*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.


Recommended Use
Chemical Occasional Contact Frequent Contact Secondary Containment Cargo Immersion Immersion Service
*Results are NOT suitable for direct or indirect food contact. Intended use exposure results relate to product's performance and substrate protection capabilities only.
  • Color cards, swatches and fan decks are offered at no charge, by request , for more accurate color selection. Expert custom color matching is also available by contacting your Tnemec Coatings Consultant .
  • Deeptone colors may be more expensive than lighter colors. Please contact your Tnemec Coatings Consultant to verify product/color availability and pricing.

Products Available In Pale 15BR

Pale| 15BR rgb 245,231,213
Request a Swatch Swatch Unavailable
These digital colors should not be used to finalize your color selection. Please read our disclaimer . Use the color swatch tool on the left to request official color swatches.

Color Swatch Packet

Request another

(maximum 6 color swatches)

You haven't added any color swatches to your packet. Select some colors now by clicking a color above and then clicking the 'Request a Swatch' button on the color.

The products listed below are not exact equivalents. They are only products that you may consider as alternatives in a general sense. Substrate type, condition, temperatures, surface preparation, primer/topcoat selection and intended use are just a few factors that will affect product selection. Please contact your local Tnemec Coatings Consultant for product recommendations.

This ProductPolyamine Epoxy